sv650s k6 headstock torque settings

i was just wondering if anyone actually knows what the correct torque setting is for the central headstock nut on an sv650s k6. i am preparing to fit a gpr steering damper and i am stuck with what setting i need to torque the nut to upon refitting.
any information regarding this issue would be gratefully received!!!!!!!!!!!!

[Stu]

Sorry on the Torque setting. There's torque setting on the main site which is down at the moment, you've reminded me I wanted to print off another copy.
But why the damper?

[Stu]

There used to be an Adobe document on the main site wit the maintenance schedule.
But I can't find it now, although I have a copy on my computer (pm me your email address if you want it anyone)
At 4MB I can't post it hear but an extract is

2-32 PERIODIC MAINTENANCE
CHASSIS BOLT AND NUT
Tighten initially at 1 000 km (600 miles, 1 month) and every 6 000 km (4 000 miles, 6 months)
thereafter.
• Check that all chassis bolts and nuts are tightened to their specified torque . (Refer to page 2-33 for the
locations of the following nuts and bolts on the motorcycle .)
Item N.m kgf-m lb-ft
90 Steering stem head nut 90 9.0 65.0
(2 Front fork upper clamp bolt 23 2.3 16.5
03 Front fork lower clamp bolt 23 2.3 16.5
® Front fork cap bolt 23 2.3 16.5
O5 Front axle 65 6.5 47.0
® Front axle pinch bolt 23 2.3 16.5
07 Handlebar clamp bolt 23 2.3 16.5
® Handlebar holder nut (SV650) 45 4.5 32.5
(9 Front brake master cylinder mounting bolt 10 1 .0 7.0
10 Front brake caliper mounting bolt 39 3.9 28.0
11 Brake hose union bolt 23 2.3 16.5

Front caliper air bleeder valve 7.5 0.75 5.5
13 Brake disc bolt (Front and Rear) 23 2.3 16.5
14 Rear brake caliper mounting bolt 23 2.3 16.5
15 Rear brake caliper sliding pin 27 2.7 19.5
16 Rear brake master cylinder mounting bolt 10 1 .0 7.0
17 Rear brake master cylinder rod lock nut 18 1 .8 13.0
18 Front footrest bracket mounting bolt 23 2.3 16.5
19 Front footrest bolt 39 3.9 28.0
20 Swingarm pivot shaft nut 100 10.0 72.5
21 Swingarm pivot shaft lock nut 90 9.0 65.0
2~ Rear shock absorber mounting upper nut 50 5.0 36.0
23 Rear shock absorber mounting bolt 50 5.0 36.0
24 Cushion lever mounting nut 78 7.8 56.5
25 Cushion rod mounting nut 78 7.8 56.5

© Rear axle nut 100 10.0 72.5
~7 Rear sprocket nut 60 6.0 43.5
® Seat rail mounting bolt 50 5.0 36.0
29 Rear caliper air bleeder valve 6.0 0.6 4.3

it's much easier to understand with the pictures but for what you want it's 65 lb ft