fairing etc screws

hi all
i have a 99 curvy 650s and i seem to have a few screws that are allen key fitment & rounded or rounding off.
if you could help me out with some replacements or point me in the right direction it would be greatly appreciated.
the screws i need are.
the 2off screws that hold the small triangular panels under the seat.
the 2off screws that hold the fuel tank on.
and some of the screws that hold on the lower fairing

Thanks
Jason

any help.
could anyone point me in the right direction to buy some new fixings??

http://stores.ebay.co.uk/nutzaboutbo...id=p4340.l2563

idealy i'm looking to replace the screws with originals that have the shoulder on the shank to protect the plastics when tightened.

i've already got loads of standard screws like in the ebay list.

[Geodude]

Link with part number 09139-05054 for infill and Link with part number 09139-06029 for tank. Hope it helps

I know the type you need but cannot find them in stainless steel. You can use the threaded stainless ones and use a spacer tube in the rubber grommet. This is how its done on my fairing but I dont know who stocks them. need some more myself so let me know if you find either the shouldered bolt (in stainless) or the spacer tubes.

Originally Posted by Geodude

Link with part number 09139-05054 for infill and Link with part number 09139-06029 for tank. Hope it helps

cheers dude
that will do for me. not sure if they are stainless though, but beggers can't be choosers eh

[Geodude]

Glad it was of some help buddy. Have you got a nut and bolt maker or machine shop locally? i ask because you could always take your oem fastners to them and get ss copies made.

Originally Posted by Geodude

Glad it was of some help buddy. Have you got a nut and bolt maker or machine shop locally? i ask because you could always take your oem fastners to them and get ss copies made.

probably shouldn't say this, but i can't be arsed messing about like that and i don't know any bolt makers near me

i'm just sick of trying to angle an allenkey in the hole to get the best grip.
i know that eventually i'll come to remove it with an urgent job to be done and i won't be able to get the bloody thing off

i've ordered them now anyway and apparently they are winging there way to me as i type

cheers for your help though
Jay

[Geodude]

Well Jay tbh mine are the same and i keep meaning to get them sorted but also cba and as you say i will also come unstuck one day when i need them off Let us no if what you ordered are any good.