Wednesday the 23rd

With the swing arm off, you need to take the exhaust and the rear shock off anyway, there ain't much left on the bike to take off then.
sexysi

[Viney]

Originally Posted by sexysi

With the swing arm off, you need to take the exhaust and the rear shock off anyway, there ain't much left on the bike to take off then.
sexysi

Nooo, just the engine the loom, the radiator, all the electrics, the rear subrafame, every nut and bolt, the triple clamp forks, all the bearings out, degrease the frame then having to rethread all the bolt holes etc etc. Na, mate not a lot

There is a place up norf that quotes £65 for frame and arm. Triple S or something like that they are called.

Better off going for a polished frame as you dont have to remove the bearings, and rethread holes etc. By the time you have finished, you really have to aks yourself, is it worth it. Powecer coating looks a bit wierd on a frame.

[Viney]

Sorry, got side tracked there. Cant make the 23rd, i shall be doing overtime earing £10.50 and hour

[Treacle]

£10 POUNDS AND 50 pence!!!

[Viney]

Originally Posted by Treacle

£10 POUNDS AND 50 pence!!!

That much mate. I may be able to buy something for the bike with the total, something like...er...hang on....Petrol

I am gonna try and make if all is well with work and better half, it would be good to see y'all

Can someone remind me of time to be at Riverhead please!!

[Viney]

19:30 onwards (7.30 in old money)

Looks like I may not be there now, as my new toy is already back at the dealers!

It's spewing coolant fluid out of the breather pipes and they have it for a while to sort it... I can't imagine it'll be back by Wednesday but I'll keep my fingers crossed!They have loaned me a nackered out Bandit 1200 but it's really uncomfortable to ride due to having upright bars and these hurting my wrists (clipons don't for some reason!! ).

I suppose I might make it in the van but I dunno if I'll have the heart.

Originally Posted by sexysi

Wheels come in @ £120 all in, Ian you will have to buy new wheel bearings and fit them afterwards.
The Calipers, are now bright red they where expensive, the 2 fronts cost me £90 sprayed with 2k paint. The rear was £35.00.
The swing arm with the ends of the swing are and the tension arm come in @ £30.00. From a guy @ sidcup motorcycles called Marc.
Nice guy, good service, even drilled and fitted a new bleed nipple and chucked in a set of rear pads for free.
Now he is trying to convince me to get the frame powdercoated.
sexysi

Hee hee, you said nipple

[Treacle]

MMMMMMM! Nipples