GSXR USD Forks on 2003 sv650s - SV650.org

07-09-05, 08:44 PM

someone else posted a thread on here not too long ago but i cant find it. it had a list of which gsxr's are compatible with the sv650. just wanted to know which ones. thanks a lot

anyone else dont this swap? improvements, differences, how much did it cost and where did you get your parts from?

thanks a lot

TRICK

northwind · 07-09-05, 11:22 PM

On an 03, it's pretty straightforward- more or less a straight swap for any Y-onwards 750 or K1- thou. Some finagling with yokes is all. Some work betetr than others, but once you've got a set of 50mm yokes, you can wedge loads of different front ends in. Like mine, with its SRAD yokes but K2 forks and SRAD wheel. GSXRs have really good interchangability like that...

08-09-05, 04:50 PM

so does that mean that i can put any forks from a gsxr 750/1000 on an 03 sv650s. as long as the forks are from a bike 2000+? also, can i ue the stock sv yokes or would i need to get a new custom yoke made. also would it be possible to get a complete gsxr front end and just change the spindle?

thanks again,

TRICK

northwind · 08-09-05, 05:27 PM

You need to use either a GSXR yoke or a custom one (well, or some other yokes but mainly GSXR). You can't drill out SV ones to take the bigger forks, they're too small.

With injected bikes, I'm not sure what the deal is with the stem... You might not need to change anything in fact. Drop Zoran a line, he'll keep you straight with that...

You can use older forks than that- SRAD 750 forks (96 onwards) are pretty much the same as Y-K2 forks apparently. But personalyl I'd rather use more recent bits just because they're more likely to be in good nick.

08-09-05, 05:31 PM

Use the GSXR top and bottom yokes.

Allegedly the GSXR bearings have the same external size as the SV so should fit straight in.

Haven't checked if the length of the centre stem is correct yet but it can't be to hard to work out.

I have a set of GSXR600K4 forks and yokes sitting here if you need any measurements taken.

08-09-05, 06:37 PM

thanks for that man, you looking to sell that gsxr set up u got there? if not i might look on ebay and see what that turns up. anyway, if you can fidn out the measurements i need that would be a great help. thanks again

TRICK

08-09-05, 07:18 PM

Just waiting to hear whether I have managed to acquire another one. Will let you know if I have one spare.

09-09-05, 12:39 AM

nice one mate, you got a complete set then (forks and yokes)? would be very interested in this if you have. what year gsxr did the front end come from andwhat model is it (750/1000)? thank again mate

TRICK

09-09-05, 08:26 AM

Forks, Yokes, Calipers & Axle from a GSXR600K4 (2004).

09-09-05, 09:06 AM

uthaug did a complete front end swap with GSXR750K4 bits. The bearing is the same and the stem was the right length. He literally just bought a new front end, though, rather than collecting one.

07-09-05, 08:44 PM	#1
trick Guest Posts: n/a	GSXR USD Forks on 2003 sv650s someone else posted a thread on here not too long ago but i cant find it. it had a list of which gsxr's are compatible with the sv650. just wanted to know which ones. thanks a lot anyone else dont this swap? improvements, differences, how much did it cost and where did you get your parts from? thanks a lot TRICK

07-09-05, 11:22 PM	#2
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	On an 03, it's pretty straightforward- more or less a straight swap for any Y-onwards 750 or K1- thou. Some finagling with yokes is all. Some work betetr than others, but once you've got a set of 50mm yokes, you can wedge loads of different front ends in. Like mine, with its SRAD yokes but K2 forks and SRAD wheel. GSXRs have really good interchangability like that... __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

08-09-05, 05:27 PM	#4
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	You need to use either a GSXR yoke or a custom one (well, or some other yokes but mainly GSXR). You can't drill out SV ones to take the bigger forks, they're too small. With injected bikes, I'm not sure what the deal is with the stem... You might not need to change anything in fact. Drop Zoran a line, he'll keep you straight with that... You can use older forks than that- SRAD 750 forks (96 onwards) are pretty much the same as Y-K2 forks apparently. But personalyl I'd rather use more recent bits just because they're more likely to be in good nick. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GSXR 750 k4 wheel with GSXR 600 K7 forks	Bunks	Bikes - Talk & Issues	12	05-05-09 06:36 PM
GSXR Forks	tactcom7	Stuff Wanted	0	05-04-09 01:16 PM
K7 GSXR 600/750 or K8 GSXR 1000 Forks	shelleyamy	SV Talk, Tuning & Tweaking	17	04-07-08 07:51 AM
which GSXR for forks	svrash	SV Talk, Tuning & Tweaking	29	15-02-06 09:15 AM
2003 GSXR 1000 headlight on 2003 SV	footfukinmasta	SV Talk, Tuning & Tweaking	0	22-01-06 08:27 PM

08-09-05, 04:50 PM	#3
trick Guest Posts: n/a	so does that mean that i can put any forks from a gsxr 750/1000 on an 03 sv650s. as long as the forks are from a bike 2000+? also, can i ue the stock sv yokes or would i need to get a new custom yoke made. also would it be possible to get a complete gsxr front end and just change the spindle? thanks again, TRICK

08-09-05, 05:31 PM	#5
Mike1234 Guest Posts: n/a	Use the GSXR top and bottom yokes. Allegedly the GSXR bearings have the same external size as the SV so should fit straight in. Haven't checked if the length of the centre stem is correct yet but it can't be to hard to work out. I have a set of GSXR600K4 forks and yokes sitting here if you need any measurements taken.

08-09-05, 06:37 PM	#6
trick Guest Posts: n/a	thanks for that man, you looking to sell that gsxr set up u got there? if not i might look on ebay and see what that turns up. anyway, if you can fidn out the measurements i need that would be a great help. thanks again TRICK

08-09-05, 07:18 PM	#7
Mike1234 Guest Posts: n/a	Just waiting to hear whether I have managed to acquire another one. Will let you know if I have one spare.

09-09-05, 12:39 AM	#8
trick Guest Posts: n/a	nice one mate, you got a complete set then (forks and yokes)? would be very interested in this if you have. what year gsxr did the front end come from andwhat model is it (750/1000)? thank again mate TRICK

09-09-05, 08:26 AM	#9
Mike1234 Guest Posts: n/a	Forks, Yokes, Calipers & Axle from a GSXR600K4 (2004).

09-09-05, 09:06 AM	#10
Carsick Guest Posts: n/a	uthaug did a complete front end swap with GSXR750K4 bits. The bearing is the same and the stem was the right length. He literally just bought a new front end, though, rather than collecting one.