SV650.org - SV650 & Gladius 650 Forum



2013 Annual Rideout Plan and discussions for next years event

Reply
 
Thread Tools
Old 25-06-13, 10:35 PM   #11
Sid Squid
No, I don't lend tools.
Mega Poster
 
Sid Squid's Avatar
 
Join Date: Jul 2003
Location: Skunk Works, Nth London
Posts: 8,680
Default Re: Nailed??

They don't look like ovals, they look like wire nails to me as they have four pyramid points and are bright steel, (ie not galv), and the one to the far right looks to be an annular ring nail, looking at their diameter I would guess that they were about 1"-1 1/2" long originally, also they were in there for a reasonable while - the heads have worn away.

You upset anyone recently?
__________________
If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing.

"a deathless anthem of nuclear-strength romantic angst"
Sid Squid is offline   Reply With Quote
Old 25-06-13, 11:25 PM   #12
keith_d
Member
Mega Poster
 
keith_d's Avatar
 
Join Date: Feb 2009
Location: Ruislip
Posts: 1,131
Default Re: Nailed??

Quote:
Originally Posted by Sid Squid View Post
They don't look like ovals, they look like wire nails to me as they have four pyramid points and are bright steel, (ie not galv), and the one to the far right looks to be an annular ring nail, looking at their diameter I would guess that they were about 1"-1 1/2" long originally, also they were in there for a reasonable while - the heads have worn away.

You upset anyone recently?
I don't think I've annoyed anyone recently, well no more so than usual.

My first thought when I took them out was cheap 1/2" panel pins. The bottom right one still looks like it has the original head on it. I'll take a proper look tomorrow.

Last edited by keith_d; 26-06-13 at 05:55 AM.
keith_d is offline   Reply With Quote
Old 26-06-13, 05:55 AM   #13
keith_d
Member
Mega Poster
 
keith_d's Avatar
 
Join Date: Feb 2009
Location: Ruislip
Posts: 1,131
Default Re: Nailed??

I've just got the loupe out and taken a proper look.

They're definitely round, just under 1.6mm/16gauge and the longest of them are all around 12mm. Most of them have small, badly stamped ridges which I'd usually expect near the top of a panel pin.

So my money's on 1/2" panel pins and as Ian pointed out, if someone spilled them they're just not worth picking up.
keith_d is offline   Reply With Quote
Old 26-06-13, 08:16 AM   #14
NTECUK
Member
Mega Poster
 
NTECUK's Avatar
 
Join Date: Apr 2011
Location: essex
Posts: 5,314
Default Re: Nailed??

So a good reminder to check the old hoops out Regualy .
__________________
Raisin cookies that look like chocolate chip cookies are the reason I have trust issues.
NTECUK is offline   Reply With Quote
Old 26-06-13, 05:41 PM   #15
Jason H
Member
 
Jason H's Avatar
 
Join Date: Mar 2013
Location: Sussex...Previously a Somerset Lad
Posts: 276
Default Re: Nailed??

I ended up having to stop on the way back from the AR with a good ol' puncture so you're not the only one who ended up with a flat.

No nails in mine but a nail sized hole.

J
__________________
Naked K5 - Now Red with sexy stripes!!
Mods: Renthal Flat bars, 's' clutch perch, GSXR front master cylinder, CNC shorty levers, Tail Tidy, Fuel Mini S/S Slip-on, 15/47, 's' Swing-arm, Pillion seat cowl, GSXR 750 front end, CNC polished top yoke, R6 Throttle tube, GSXR rear shock

Jason H is offline   Reply With Quote
Old 26-06-13, 06:40 PM   #16
Gimerk
Guest
 
Posts: n/a
Default Re: Re: Nailed??

Quote:
Originally Posted by The Idle Biker View Post
Only small talk but the tyre guy I spoke to once said that one of the biggest cause of punctures was builders/ plumbers etc spilling screws n stuff when they're parked up and unloading outside houses??

That's really uninteresting isn't it? Sorry about that.
I had a rear tyre explode on my FZ6 after navigating a roundabout - the split was a good three inches across the tyre. It transpired that I'd run the front over a stanley blade which flipped it up ready for the rear to swallow it. It was a scary moment!

Sent from my GT-I9300 using Tapatalk 2
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
nailed me test Bibio Idle Banter 15 18-08-08 09:28 AM
I got nailed (tyre) Blue_SV650S Bikes - Talk & Issues 13 05-07-07 09:06 AM
Yeehaa I nailed the U turn and passed setanta Bikes - Talk & Issues 28 26-12-05 05:46 PM
Tyre nailed (sob) Jabba SV Talk, Tuning & Tweaking 14 05-08-04 07:46 PM


All times are GMT. The time now is 04:26 PM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.