Micron systems - Page 2 - SV650.org

29-11-07, 03:41 AM

biggest difference I noticed when riding.Micron was really soft coming out of corners compared to M4 or Leo.
Leo just works everywhere.

MrMessy · 29-11-07, 02:09 PM

Standard filter, tank raised slightly and one notch richer on needle.

yorkie_chris · 25-01-09, 04:41 PM

Zombie-thread...

Had this fitted for a while now, runs alright but is very soft in the midrange. Didn't know how soft until I had a go on a stock one the other day. It's likely a practically empty stubby can doesn't help either. With so little packing in the can it really takes off when it hits about 6k.

Time for something else methinks...

yorkie_chris · 25-01-09, 04:45 PM

Perhaps bump the compression up a bit. Perhaps pod filters.

dizzyblonde · 25-01-09, 04:50 PM

perhaps putting your standard system back on with the can and put all the jetting back to basics. Then, decide where to go from there. Go from the ground up again instead of trying to make sense of everything that has been swapped and changed???

Don;t know plop I know, but it seems to make more sense to me to start again, than making sense of the muddle of stuff you've changed over the months

yorkie_chris · 25-01-09, 04:52 PM

Where's the fun in that?

dizzyblonde · 25-01-09, 04:59 PM

errr better than too many obstacles? And getting the result you want much quicker and efficiently than going round the houses?

yorkie_chris · 25-01-09, 05:06 PM

Already got BMC filter, which I am probably keeping. Would not run at all with stock jets. Jetting will probably be the same with a different system anyway. I dunno. Be right.

25-01-09, 06:51 PM

Quote:

Originally Posted by yorkie_chris

It's likely a practically empty stubby can doesn't help either.

Find another budget UK exhaust, same diameter inlet, you can borrow for a ride and see how that feels.

maviczap · 25-01-09, 07:38 PM

Got a Micron system on mine, with a standard BMC filter on it. But it needs setting up properly. But I'm happy with it, its better than stock, just for weight loss alone.

Will have some brand new Micron headers going on Evilbay this week, plus a low level link pipe.

29-11-07, 03:41 AM	#11
zadar Guest Posts: n/a	Re: Micron systems biggest difference I noticed when riding.Micron was really soft coming out of corners compared to M4 or Leo. Leo just works everywhere.

29-11-07, 02:09 PM	#12
MrMessy Member Join Date: Sep 2004 Posts: 557	Re: Micron systems Standard filter, tank raised slightly and one notch richer on needle.

25-01-09, 04:41 PM	#13
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Micron systems Zombie-thread... Had this fitted for a while now, runs alright but is very soft in the midrange. Didn't know how soft until I had a go on a stock one the other day. It's likely a practically empty stubby can doesn't help either. With so little packing in the can it really takes off when it hits about 6k. Time for something else methinks... __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

25-01-09, 04:45 PM	#14
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Micron systems Perhaps bump the compression up a bit. Perhaps pod filters. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

25-01-09, 04:50 PM	#15
dizzyblonde Da Cake Boss Mega Poster Join Date: May 2007 Location: On a flying Horse Posts: 9,992	Re: Micron systems perhaps putting your standard system back on with the can and put all the jetting back to basics. Then, decide where to go from there. Go from the ground up again instead of trying to make sense of everything that has been swapped and changed??? Don;t know plop I know, but it seems to make more sense to me to start again, than making sense of the muddle of stuff you've changed over the months __________________ Suzy, yellow 2001 SVS. Kitty, V-Raptor 1000, ZZR1400<<its my bike now Pegasus! Hovis 13.8.75-3.10.09 Reeder 20.7.88-21.3.12

25-01-09, 04:52 PM	#16
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Micron systems Where's the fun in that? __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

25-01-09, 04:59 PM	#17
dizzyblonde Da Cake Boss Mega Poster Join Date: May 2007 Location: On a flying Horse Posts: 9,992	Re: Micron systems errr better than too many obstacles? And getting the result you want much quicker and efficiently than going round the houses? __________________ Suzy, yellow 2001 SVS. Kitty, V-Raptor 1000, ZZR1400<<its my bike now Pegasus! Hovis 13.8.75-3.10.09 Reeder 20.7.88-21.3.12

25-01-09, 05:06 PM	#18
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Micron systems Already got BMC filter, which I am probably keeping. Would not run at all with stock jets. Jetting will probably be the same with a different system anyway. I dunno. Be right. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

25-01-09, 07:38 PM	#20
maviczap Member Mega Poster Join Date: Mar 2007 Posts: 9,097	Re: Micron systems Got a Micron system on mine, with a standard BMC filter on it. But it needs setting up properly. But I'm happy with it, its better than stock, just for weight loss alone. Will have some brand new Micron headers going on Evilbay this week, plus a low level link pipe. __________________ We're riding out tonight to case the promised land Make everyday count RIP Reeder - Jolly Green Giant and comedy genius

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HEL Performance Systems need your help	admin	SV Talk, Tuning & Tweaking	51	24-05-09 08:50 AM
new Autocom systems?	rob13	Bikes - Talk & Issues	17	14-01-06 10:50 AM
Exhaust systems	pljharvey	The Essex Lounge	18	24-11-05 05:50 PM
GPS systems	tomjones2	SV Talk, Tuning & Tweaking	69	21-11-05 12:06 PM
3/4 systems	markf	Exhausts	3	12-09-05 05:43 PM