side stand advice curvey - Page 2 - SV650.org

29-09-08, 08:50 PM

do you think changing the plate will fix my problem. the bolt and fork on the stand seem to be fine although i did close the gap in the fork part of the stand which did solve my prblem but today its catching again whihc makes me think tht the bolt maybe gone to. think ill just try one at a time .

thanks for all the help guys. huskey ive pmd you.

29-09-08, 09:00 PM

If the fault is with the plate only then the stand it self should be good and reusable.

TSM · 29-09-08, 09:05 PM

remember that even a 1mm wear in the bolt will work out as a large movement, but if you say that the hole is properly oval then its prooly a good start there, GSXR side stand plates will fit SV curvies

Sid Squid · 29-09-08, 09:10 PM

£61.80! Ouch.

Welder.

29-09-08, 08:50 PM	#11
scottjames Guest Posts: n/a	Re: side stand advice curvey do you think changing the plate will fix my problem. the bolt and fork on the stand seem to be fine although i did close the gap in the fork part of the stand which did solve my prblem but today its catching again whihc makes me think tht the bolt maybe gone to. think ill just try one at a time . thanks for all the help guys. huskey ive pmd you.

29-09-08, 09:00 PM	#12
Dangerous Dave Guest Posts: n/a	Re: side stand advice curvey If the fault is with the plate only then the stand it self should be good and reusable.

29-09-08, 09:05 PM	#13
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Re: side stand advice curvey remember that even a 1mm wear in the bolt will work out as a large movement, but if you say that the hole is properly oval then its prooly a good start there, GSXR side stand plates will fit SV curvies __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

29-09-08, 09:10 PM	#14
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Re: side stand advice curvey £61.80! Ouch. Welder. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Could the SV side stand break off	Tomis	Bikes - Talk & Issues	13	02-04-08 12:59 PM
Side Stand	Giffer2	SV Talk, Tuning & Tweaking	3	23-06-07 07:38 PM
Storage: Side stand or rear paddock stand?	Maudster	SV Talk, Tuning & Tweaking	19	20-01-07 04:45 PM
Moving the SV on the side stand!	suzsv650	SV Talk, Tuning & Tweaking	6	15-10-06 08:09 PM
Side stand	Tris	SV Talk, Tuning & Tweaking	6	17-10-04 12:12 AM