race can

it doesnt seem to be clampled on but it looks like a pretty tight fit. it is in a similer sort of place were you conect a race can for a 600 bandit if that helps. i havent got the facilitys at the mo to post a pic on here because i am at work. cheers. jamie

You can get 3/4 systems (can't remember who from though). I think this what you are talking about.

GForce do a 3/4 system

[fizzwheel]

Heres pciture of the exhaust on my bike I have put an arrow on it to show you where I cut mine to fit the race can to it, if you look closely you can see the clamp and where it joins onto the original pipe work

hope this helps

that is in exactly the same place as mine is. the cut on mine is very neat and you would of never thought it was cut. i will have a really good look at it later and see if it will disconnect. that would save me alot of hassle in the long run. just want to make sure it is right. thanks alot for the help. any more ideas would be greatly appreceated. many thanks. jamie

[fizzwheel]

Originally Posted by jamieclayton9

that is in exactly the same place as mine is. the cut on mine is very neat and you would of never thought it was cut. i will have a really good look at it later and see if it will disconnect. that would save me alot of hassle in the long run. just want to make sure it is right. thanks alot for the help. any more ideas would be greatly appreceated. many thanks. jamie

Sounds like the previous owner of your bike has already cut it then

You should be able to get a slip on can that will fit no problem

Good luck