Metal rod under seat

Originally Posted by Robbo_

I lost one of the small black poppers when taking off the rear fairing Anyone know where I can get a replacement?

suzuki dealer or Toyota dealer (my toyota car uses the same fasteners) i think they are 40p each or something like that

I have a K3 model, and also have fitted the Hemicad tail tidy.

The original fitting has two lugs, and a rubber band which holds the toolkit in place. No little box. (also some clips for the tank prop)

Although I haven't found a hi-tech solution, I have found that putting in a huge chain lock fills the underseat compartment and has enough to weight the toolkit down, and stop it from rattling around.

It also works as a handy anti-theft device when you park your bike

Originally Posted by SiSv

my tool kit sits in its own little box behind the rear shock, does no one else have this? mine is a k5

Only K4 and K5 have that.

You can sometimes get a spare SV tool kit from E-bay for about £5.

It seems that a few Vtwin bikes have a hinged tank to get to the rear pot and the carbs/fuel system, and my mate's ducati has a lock rather than a tank prop bar.

Originally Posted by Robbo_

OK cheers.

Whats a tool roll? Also, I lost one of the small black poppers when taking off the rear fairing. Anyone know where I can get a replacement?

your local dealer will probably give you one for free. if they do charge you they'll probably only cost about 50p

TRICK

Originally Posted by Robbo_

Hi, sorry for the noob question! I've just fitted a hamicad rear fender and found out there is nowhere for the tool kit to go. I also found a longish bar, looks like some kind of tool, about 12" long with a couple of bends in it. What is it for?!?

Its a K3 SV650S. I have removed the bar and the tool kit.

Whatever you do, do not touch this rod, it is made of super inductive plutonium, it stores the power that an SV has and helps to keep the Suzuki tame

[northwind]

That's the starting handle.