SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 17-08-06, 02:56 PM   #11
Daimo
Guest
 
Posts: n/a
Default

I was given advice to use the rear brake on here on a bit of road i use...

It made my cornering much quicker, more controlled, and the bike was easier to get into the corners...

I use my rear brake loads, mainly for dropping off that little bit more speed if im still going in to hot as the bikes tipped over... Also use it at slow speeds in the city, if you just hit the fronts in town, u'll loose it as the roads are so greasy.

TSM, cheers for that dude, more options now
  Reply With Quote
Old 17-08-06, 03:23 PM   #12
jambo
Member
Mega Poster
 
jambo's Avatar
 
Join Date: Aug 2003
Location: Croydonia
Posts: 5,376
Default

Quote:
Originally Posted by Daimo
if you just hit the fronts in town, u'll loose it as the roads are so greasy.
Oh, I've been doing it all wrong the last 3 years then

Whatever works for you, the Rear brake on the Kwak is a Single piston sliding caliper, but works well enough. I just use almost all front brake
__________________
Modern motorcycles are bloody brilliant, enjoy it while we can
jambo is offline   Reply With Quote
Old 17-08-06, 03:29 PM   #13
andyaikido
Guest
 
Posts: n/a
Default

I find I barely use the brakes at all on the SV. I only use the rear brake with a pillion and on my own I mainly use 1 finger on the front brake and let the engine do the braking.
  Reply With Quote
Old 17-08-06, 03:39 PM   #14
Daimo
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by jambo

Oh, I've been doing it all wrong the last 3 years then
Don't get me wrong, out of london, im mainly on the fronts...

But...

My accident happened because i paniced (car cat accross lanes in rush hour without indication or looking) and hit the fronts too hard. I really think i've i'd have gone on the rears as well I wouldn't have gone down. But we learn as we grow

Just meant i use my rear brake, but where possible, i try not to at all, and judge the distance (I.e traffic lights) and just come off throttle and let the great engine braking do the job... Saves my pads
  Reply With Quote
Old 17-08-06, 03:57 PM   #15
jambo
Member
Mega Poster
 
jambo's Avatar
 
Join Date: Aug 2003
Location: Croydonia
Posts: 5,376
Default

Quote:
Originally Posted by Daimo
Don't get me wrong, out of london, im mainly on the fronts...
Ditto, though in London I'm mainly fron too. Different styles and bikes and all that, certainly I'm much more careful when the conditions get a bit slippery, then the rear brake's asked to work for a living
__________________
Modern motorcycles are bloody brilliant, enjoy it while we can
jambo is offline   Reply With Quote
Old 17-08-06, 04:22 PM   #16
Stig
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by jonboy
Yes, I remember reading a road test on a Tuono, and they said the rear brake hardly worked. Not the only bike where the rear is virtually over-looked as "sports-riders" don't use the back brake .


.
And what's even stranger is that some people actually prefer the rear brake than the front. Now you gotta be some sort of wierdo to ride like that. Right
  Reply With Quote
Old 17-08-06, 04:23 PM   #17
jonboy
Guest
 
Posts: n/a
Default

Yup.


.
  Reply With Quote
Old 18-08-06, 10:48 AM   #18
Fuzz
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by grecian9
Well on my recent DAS we were taught 75% front brake for heavy braking or even 100% on a modern bike, i.e perhaps lay off the back brake a bit? I'm a total novice so tell me to get lost if you like!
If you end up putting too much pressure on the rear brake it's easy to lock the rear wheel. It happens all to easy if your progressively braking harder on the front, you tend to automatically add more rear aswell.

Using the rear with the front doesn't really slow you down much quicker, but it can help stabilise the bike and reduce the amount of dive.

I generally use the rear only when in 1st and about to stop, at lights or a junction, for example. If I need to brake hard, I will use the rear, but a couple times I have locked the back wheel by adding a little too much.
  Reply With Quote
Old 18-08-06, 11:03 AM   #19
21QUEST
Member
Mega Poster
 
21QUEST's Avatar
 
Join Date: Aug 2003
Location: HomeBound
Posts: 3,302
Default

Quote:
Originally Posted by jonboy
Yup.


.
.

FWIW(GT of SFA :P ) , I think the rear brake causes more problem that most peeps realise more so in the wet. I probably use my rear brake less than five times a day no matter where.

It's good to be able to trust and if I may say , learn to use your fronts effectively.

Cheers
Ben
__________________
Nemo me impune lacessit.
Quote:
Originally Posted by Lissa View Post
Blue, mate, having read a lot of your stuff I'd say 'in your head' is unknown territory for most of us
21QUEST is offline   Reply With Quote
Old 18-08-06, 11:22 AM   #20
Scoobs
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by jonboy
The rear brake on the curvey is one of the best out there, far better than some you'll find on so-called "sports bikes". I doubt very much whether you'll improve on its performance.
s'true.

The rear brake on my CBR is useful for illuminating the brake light and no more.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacement Brake Lever - fairly standard fits? schofs Bikes - Talk & Issues 7 09-11-08 10:52 AM
Cleaning all around the rear wheel / swingarm / rear brake caliper Camel SV Talk, Tuning & Tweaking 12 28-04-08 02:00 PM
Brake light not working when rear brake is used.. StreetHawk SV Talk, Tuning & Tweaking 10 16-04-07 03:40 AM
04 svs what rear shock fits? Captain Nemo SV Talk, Tuning & Tweaking 2 12-05-05 04:11 PM
which gsxr rear shock fits sv650 sk3? Torn SV Talk, Tuning & Tweaking 1 14-03-05 04:45 PM


All times are GMT. The time now is 02:45 AM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.