Servicing my brakes and fitting braided lines - Page 2 - SV650.org

07-02-07, 09:33 AM

I forgot about Retaining Pins.

07-02-07, 11:19 AM

yet another brake question

Ordering the 3 line kit - 2 front 1 rear - what about the small rubber pieces between the linkage and the reservoirs?

07-02-07, 11:23 AM

They are included... as far as I know. Looking at HEL braided hoses at the minute so i'll let you know.

07-02-07, 11:32 AM

I don't think they are... I take it you mean the rubber hose from leaver to the reservoir?

If you mean from the leaver to the bottom t-piece and then to the bakes the lines that come are long enough that you don't need this.

07-02-07, 11:46 AM

Just ordered me bits... when replacing the seals in the front calipers is it really 4 sets of dust and piston seals you need?

07-02-07, 11:54 AM

Quote:

Originally Posted by Grinch

Just ordered me bits... when replacing the seals in the front calipers is it really 4 sets of dust and piston seals you need?

4 sets? You have two pots per caliper so you need 4 dust seals and 4 fluid seals.

07-02-07, 12:10 PM

Quote:

Originally Posted by Grinch

Just ordered me bits... when replacing the seals in the front calipers is it really 4 sets of dust and piston seals you need?

Hmm, i think when i ordered mine they came as a caliper set containing 2 dust seais and 2 fluid seals

If its per piston, then 4 sets needed, 1 fluid seal and 1 dust seal

07-02-07, 12:44 PM

Couldn't remember it they just did the sets 'as' per caliper or per piston side.

07-02-07, 06:35 PM

aye the bit from the lever to the reservoir and the bit from the reservoir to the linkage which is near to the rear res for the rear brake.

Viney · 07-02-07, 06:47 PM

Quote:

Originally Posted by Grinch

Quote:

Originally Posted by Viney

Bring it up tp me Grinch.

Cool... now this I could do... right, lets order the seals and fluid.

You gonna book it in, or just turn up

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Braided lines	yorkie_chris	SV Talk, Tuning & Tweaking	1	31-05-07 09:58 PM
Braided Lines	600+	SV Talk, Tuning & Tweaking	15	03-09-06 08:29 AM
Braided Lines	M65	SV Talk, Tuning & Tweaking	10	26-06-05 02:02 PM
HEL Braided lines	Couerdelion	SV Talk, Tuning & Tweaking	7	30-05-05 07:13 AM
HEL Braided lines	mysteryjimbo	SV Talk, Tuning & Tweaking	8	10-02-05 10:20 PM

07-02-07, 09:33 AM	#11
Grinch Guest Posts: n/a	I forgot about Retaining Pins.

07-02-07, 11:19 AM	#12
rob13 Guest Posts: n/a	yet another brake question Ordering the 3 line kit - 2 front 1 rear - what about the small rubber pieces between the linkage and the reservoirs?

07-02-07, 11:23 AM	#13
Sideshow#36 Guest Posts: n/a	They are included... as far as I know. Looking at HEL braided hoses at the minute so i'll let you know.

07-02-07, 11:32 AM	#14
Grinch Guest Posts: n/a	I don't think they are... I take it you mean the rubber hose from leaver to the reservoir? If you mean from the leaver to the bottom t-piece and then to the bakes the lines that come are long enough that you don't need this.

07-02-07, 11:46 AM	#15
Grinch Guest Posts: n/a	Just ordered me bits... when replacing the seals in the front calipers is it really 4 sets of dust and piston seals you need?

07-02-07, 12:44 PM	#18
Grinch Guest Posts: n/a	Couldn't remember it they just did the sets 'as' per caliper or per piston side.

07-02-07, 06:35 PM	#19
rob13 Guest Posts: n/a	aye the bit from the lever to the reservoir and the bit from the reservoir to the linkage which is near to the rear res for the rear brake.