GP style exhausts on an SV?

I recall northy fitting an R6 remus (GP style) powercone to his SV. There is a video of it on youtube somewhere. Aparently it fouls the swingarm though.

well i think its this video although it doesnt sound tooo loud

http://www.youtube.com/watch?v=ErufvV72FqY

[the_lone_wolf]

thanks for the vid there, sounds awesome on the power up but on that vid it sounds like it lacks the bellowing on the overrun that just makes me smile

after popping in to see what was new i've put my name down for a scorpion street extreme at my local dealers to be fitted after it's run in, should be fitted on the 21st june, i expect the baffle to go missing soon afterwards and will try and record a vid for you guys who are still umming and ahhing about which can - i initially thought the stubby cans wouldn't suit the sv but having seen the scorpion i think it should be fine

well here is another vid i found of the gp style one but the bloke seems a bit scared to rev it with neighbours but sounds awsome

http://www.youtube.com/watch?v=IYU1nriCX1o

[the_lone_wolf]

haha, that's mental - i want loud but not quite that loud

[Stu]

Originally Posted by the_lone_wolf

haha, that's mental - i want loud but not quite that loud

I did, that's why I bought that bloke's can.
Hers's another of his
http://www.youtube.com/watch?v=Cq6VTN7GcfU

Originally Posted by the_lone_wolf

after popping in to see what was new i've put my name down for a scorpion street extreme at my local dealers to be fitted after it's run in, should be fitted on the 21st june

will you post a pic and comments about it when you get it, because I was considering getting the same for mine.

That is, provided I don't just go ahead and get one myself anyway...

L.

[the_lone_wolf]

Originally Posted by Idleater

will you post a pic and comments about it when you get it, because I was considering getting the same for mine.

That is, provided I don't just go ahead and get one myself anyway...

L.

hehe, will do, just got to source a titanium one

how much modding would be needed to get the akapovic one on there and will i be stopped every 10 seconds or not??

[Stu]

Originally Posted by rs_tubby

how much modding would be needed to get the akapovic one on there and will i be stopped every 10 seconds or not??

None at all
well, cut exhaust as for any aftermarket, make some cross cuts in the end of the pipe attached to the bike. Separate the holey metal from the pipe on the bike put some sealant around the edge and shove the Akra inside the pipe between the pipe & the holey metal maybe add some more sealant. Tighten the jubilee clip to compress the pipe on the bike.

Got pulled once before so far touch wood, but that was because it sounded so good it pushed me to ride too fast.