Will I need to rejet? - Page 3 - SV650.org

14-04-08, 04:33 PM

Quote:

Originally Posted by svste

the quill fits the M4 linkpipe

I take it you have a Pointy???

I know for a fact that the standard Quill SV can will not fit a Curvy M4 full system!

BoltonSte · 14-04-08, 04:53 PM

Nope, curvy. Bought the can as a curvy can years ago and the M4 system came off a curvy as well.

It clamps up, just not in the best position, hence the quill link pipe being used if needed it will clear the swingarm OK jst not confident enough to ride round with it like that long term.

14-04-08, 04:57 PM

Are you sure, they are both two different diameters. The SV Quill is about 51mm and the M4 is nearer 57mm....

BoltonSte · 15-04-08, 09:22 AM

Don't know what's going on there then, but the quill can deffo fits onto the M4 linkpipe (linkpipe inside can, as can has the splits) and the quill linkpipe deffo slipped onto the M4 system and clamped up fine. And yes the system is the same as the one in the pic.

Unless they changed it, if I ever have the can off agin I'll measure the diameters to check.

Ste

14-04-08, 04:53 PM	#22
BoltonSte Member Mega Poster Join Date: Aug 2003 Location: Back in Bolton Posts: 1,010	Re: Will I need to rejet? Nope, curvy. Bought the can as a curvy can years ago and the M4 system came off a curvy as well. It clamps up, just not in the best position, hence the quill link pipe being used if needed it will clear the swingarm OK jst not confident enough to ride round with it like that long term. __________________ Had an SV or three. Street triple R - gone but not forgotten. Now trying the lunacy that is KTM with a Superduke GT. for the pillion capability of course.

14-04-08, 04:57 PM	#23
Dangerous Dave Guest Posts: n/a	Re: Will I need to rejet? Are you sure, they are both two different diameters. The SV Quill is about 51mm and the M4 is nearer 57mm.... Last edited by Dangerous Dave; 14-04-08 at 05:07 PM.

15-04-08, 09:22 AM	#24
BoltonSte Member Mega Poster Join Date: Aug 2003 Location: Back in Bolton Posts: 1,010	Re: Will I need to rejet? Don't know what's going on there then, but the quill can deffo fits onto the M4 linkpipe (linkpipe inside can, as can has the splits) and the quill linkpipe deffo slipped onto the M4 system and clamped up fine. And yes the system is the same as the one in the pic. Unless they changed it, if I ever have the can off agin I'll measure the diameters to check. Ste __________________ Had an SV or three. Street triple R - gone but not forgotten. Now trying the lunacy that is KTM with a Superduke GT. for the pillion capability of course.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Do i need a rejet, or is this something different ..	drag	SV Talk, Tuning & Tweaking	11	16-09-08 08:21 AM
Rejet after Pipe install?	SloppyJoseph	SV Talk, Tuning & Tweaking	2	05-04-07 01:34 PM
K&N + Race can = Rejet?	Blue_SV650S	SV Talk, Tuning & Tweaking	13	27-07-06 06:23 PM
yoshi RS-3 on do i have to rejet	raven22	SV Talk, Tuning & Tweaking	7	17-02-06 07:03 PM
Do i have to rejet or shim	raven22	Exhausts	4	10-02-06 12:47 AM