SV1000 front end rebuild. - Page 3 - SV650.org

10-04-10, 07:46 PM

Quote:

Originally Posted by Holdup

Weirdo

Helpful as always James...

10-04-10, 07:50 PM

You know this

11-04-10, 08:32 AM

Is the only difference between GSXR 1000 K4 clip ons and SV1000S clip ons the size of the clamp it attaches to the fork?

Or do I need to do some fiddling with the grips and attachments from the current clip ons?

15-04-10, 07:24 PM

Right, I have found a pretty handy guide on how to sort out the front end, my problem is it is written for sorting a 650, so, on the case of wheel spindles do I need one for the front and back or will I be OK with a Thou'? And do I need new bearings?

yorkie_chris · 23-04-10, 12:24 PM

Quote:

Originally Posted by fizzwheel

Didnt them come from an older generation GSXR750 ?

Calipers did, I think SV1000 forks are maybe KYB though where all 750s for a while back used showa.

hindle8907 · 23-04-10, 03:42 PM

iv not laughed like this for ages

... you have leedsmatt trying to start a bike like a car in the gsvxr thread and cymraeg wanking forks in here .....

yorkie_chris · 23-04-10, 03:50 PM

Quote:

Originally Posted by Cymraeg_Atodeg

Is the only difference between GSXR 1000 K4 clip ons and SV1000S clip ons the size of the clamp it attaches to the fork?

Or do I need to do some fiddling with the grips and attachments from the current clip ons?

Your controls should swap onto the new clipons... but GSXR ones will be lower.

23-04-10, 05:06 PM

Well I got GSXR 750 K7 forks now Chris, so, should be interesting finding bits. lol

Nobbylad · 23-04-10, 06:08 PM

They're the same as I've got.

23-04-10, 06:49 PM

Quote:

Originally Posted by Nobbylad

They're the same as I've got.

Yes, yes they are. My bonus is my speedo works off the gear-box and not the front wheel

10-04-10, 07:50 PM	#22
Holdup Guest Posts: n/a	Re: SV1000 front end rebuild. You know this

11-04-10, 08:32 AM	#23
Cymraeg_Atodeg Guest Posts: n/a	Re: SV1000 front end rebuild. Is the only difference between GSXR 1000 K4 clip ons and SV1000S clip ons the size of the clamp it attaches to the fork? Or do I need to do some fiddling with the grips and attachments from the current clip ons?

15-04-10, 07:24 PM	#24
Cymraeg_Atodeg Guest Posts: n/a	Re: SV1000 front end rebuild. Right, I have found a pretty handy guide on how to sort out the front end, my problem is it is written for sorting a 650, so, on the case of wheel spindles do I need one for the front and back or will I be OK with a Thou'? And do I need new bearings?

23-04-10, 03:42 PM	#26
hindle8907 Member Mega Poster Join Date: May 2009 Location: Manchester Posts: 1,492	Re: SV1000 front end rebuild. iv not laughed like this for ages ... you have leedsmatt trying to start a bike like a car in the gsvxr thread and cymraeg wanking forks in here ..... __________________ 2006-2007 -- Gilera Runner 50 - Sold 2007-2008 -- Hyosung XRX125 - Stolen 2009-2010 -- 05 SV650n - CAT - B 2010-Now -- 00 SV650s & 00 SV650n & GSXR 600 K2

23-04-10, 05:06 PM	#28
Cymraeg_Atodeg Guest Posts: n/a	Re: SV1000 front end rebuild. Well I got GSXR 750 K7 forks now Chris, so, should be interesting finding bits. lol

23-04-10, 06:08 PM	#29
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: SV1000 front end rebuild. They're the same as I've got.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front brakes, strip + rebuild, replace or upgrade?	7755matt	SV Talk, Tuning & Tweaking	6	20-12-09 08:22 AM
Oooooooonnnnnnngoing front end rebuild...	mnrsmith	SV Talk, Tuning & Tweaking	2	29-07-09 07:38 PM
SV1000 front end	Red Herring	SV Talk, Tuning & Tweaking	9	13-01-09 05:58 PM
Sv1000 Front Brake	matsv650s	SV Talk, Tuning & Tweaking	1	12-05-07 03:40 PM
SV1000 front fender - same as 650?	El Saxo	SV Talk, Tuning & Tweaking	2	11-05-07 10:27 PM