Motosliders Group purchase - Crash Bungs - Page 3 - SV650.org

TSM · 16-08-06, 07:25 AM

Quote:

Originally Posted by Wadda

Theres no instructions with the Motovation ones I have just got. I think that is p*ss poor. Does anyone know what they should be torqued up to?

Just use the normal engine bolt torque figure. I cant remember the R&Gs coming with torque figures either. Its not as if the Motovation ones require a degree to install them and as such i dont realy expect a how to install that would say you have to 'remember to tighten the bolts up'. Common sense.

northwind · 16-08-06, 08:40 PM

Yep, standard for the engine bolts. I'm going to take a wild guess here and say 55nm. But in the name of god, look it up first!

16-08-06, 10:15 PM

Hi TSM, Do you know i the motovation ones are available for a SV1000, can't say i saw it mentioned anywhere on the site?

If not available then i would be interested in joining stu in the group buy on the Motosliders if still on offer - let me know Stu??

TSM · 16-08-06, 10:37 PM

Quote:

Originally Posted by kc&lotsofsunshine

Hi TSM, Do you know i the motovation ones are available for a SV1000, can't say i saw it mentioned anywhere on the site?

If not available then i would be interested in joining stu in the group buy on the Motosliders if still on offer - let me know Stu??

Call them up: http://www.bikejohnnie.com/portal/viewtopic.php?t=12

Motovation have them listed on the main site but not on bikejohnnie, they may be able to order them in.

17-08-06, 08:12 AM

Hi, When i checked out the Motorovation usa site the costs were $74.99 frame sliders/$35.99 swing arm sliders + $48.00 shipping = $158.98 apprx £91.00 how have you other guys managed to get the same kit for apprx £70.00 - Am i missing something here?

17-08-06, 12:28 PM

Email bikejonnie and ask them I am sure they can get them in for you.

I fitted my motovision sliders yesterday and managed to strip the thread 1.3 of the way down the bar some how. Not sure if it was a bad thread when I started or a bad nut but I managed it. Just had to cut the bad thread off and start again with a new nut. Was fine then.

Stu · 18-08-06, 10:45 AM

I will order on Monday if I get 3 or 4 pm's confirming you still want them. Please state what bike they are for.

18-08-06, 02:03 PM

Hey Stu,
Are we still going through me, and then I send them on to you? Or are you running the customs and excise gauntlet?

Stu · 18-08-06, 02:53 PM

Through you Philip, if that OK, if it happens at all. This thread's been very quiet, I may be asking TSM to repost his link.
Cheers
Stu

18-08-06, 02:55 PM

Yeah, no worries at all.

16-08-06, 08:40 PM	#22
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Yep, standard for the engine bolts. I'm going to take a wild guess here and say 55nm. But in the name of god, look it up first! __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

16-08-06, 10:15 PM	#23
kc&lotsofsunshine Guest Posts: n/a	motovation/motosliders Hi TSM, Do you know i the motovation ones are available for a SV1000, can't say i saw it mentioned anywhere on the site? If not available then i would be interested in joining stu in the group buy on the Motosliders if still on offer - let me know Stu??

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SWAP: Motosliders crash bungs for R&G pointy faired	lazymanc	Stuff Wanted	0	13-05-09 11:29 AM
MotoSliders Crash Bungs	Luckypants	For Sale - SV's and SV related items	12	01-08-07 07:32 PM
Help with fitting Motosliders Crash Bungs	Catflavor	SV Talk, Tuning & Tweaking	6	01-05-07 10:28 AM
Motosliders bungs	Jase22	Ancillaries	3	03-03-06 09:50 PM

17-08-06, 08:12 AM	#25
kc&lotsofsunshine Guest Posts: n/a	Hi, When i checked out the Motorovation usa site the costs were $74.99 frame sliders/$35.99 swing arm sliders + $48.00 shipping = $158.98 apprx £91.00 how have you other guys managed to get the same kit for apprx £70.00 - Am i missing something here?

17-08-06, 12:28 PM	#26
Wadda Guest Posts: n/a	Email bikejonnie and ask them I am sure they can get them in for you. I fitted my motovision sliders yesterday and managed to strip the thread 1.3 of the way down the bar some how. Not sure if it was a bad thread when I started or a bad nut but I managed it. Just had to cut the bad thread off and start again with a new nut. Was fine then.

18-08-06, 10:45 AM	#27
Stu Trinity Mega Poster Join Date: Jun 2006 Location: Guildford Posts: 8,027	I will order on Monday if I get 3 or 4 pm's confirming you still want them. Please state what bike they are for.

18-08-06, 02:03 PM	#28
philipMac Guest Posts: n/a	Hey Stu, Are we still going through me, and then I send them on to you? Or are you running the customs and excise gauntlet?

18-08-06, 02:53 PM	#29
Stu Trinity Mega Poster Join Date: Jun 2006 Location: Guildford Posts: 8,027	Through you Philip, if that OK, if it happens at all. This thread's been very quiet, I may be asking TSM to repost his link. Cheers Stu

18-08-06, 02:55 PM	#30
philipMac Guest Posts: n/a	Yeah, no worries at all.