USD GSXR1000 k1 forks | standed forks - curvy - Page 4 - SV650.org

Nicky S · 10-05-09, 11:39 PM

Quote:

Originally Posted by yorkie_chris

SRAD (according to my cheap $hit vernier caliper)

130mm between discs measuring to inside
25mm inner diameter of spindle
32mm spindle diameter at fork base.

what is this to work out ?

Bibio · 10-05-09, 11:40 PM

hold on i'll get the spindle sizes..

yorkie_chris · 10-05-09, 11:41 PM

Whether you can use a matching SRAD wheel, or whether you need to use later and more expensive K1-K5* wheel

*K5 600 and 750. Up to K4 1000

Bibio · 10-05-09, 11:45 PM

ok spindle size is 31.5-32mm and shank is 15mm

Bibio · 10-05-09, 11:46 PM

wring its 25mm shank

yorkie_chris · 10-05-09, 11:48 PM

Yeah mine was a little below 32mm on spindle... pinch on bottom of fork will sort half a mil difference no problem if there is even a difference.

(Just remembered I measured practically on where the dust seal would sit, so a little wear here is not out of the question)

What about separation between the brake discs?

Nicky S · 10-05-09, 11:52 PM

im off to bed so all we need to know is what wheel discs spindel and calipers i can use. also is there a way to use the sv speedo on the front ??

yorkie_chris · 10-05-09, 11:53 PM

Quote:

Originally Posted by Bibio

wring its 25mm shank

Confirmed aye... they both take same wheel bearing (6205 2RS, 90% sure)

Bibio · 10-05-09, 11:55 PM

what i was thinking is 130mm - 1mm for gsxr discs gives us 129 .. which would give us +1mm either side extra to get the srad wheel into the callipers...

hmmmm.. reduction of the calliper mounting faces by 1mm per side would be perfect...

Bibio · 10-05-09, 11:57 PM

gsxr front bearing is 25X52X15

10-05-09, 11:40 PM	#32
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: USD GSXR1000 k1 forks \| standed forks - curvy hold on i'll get the spindle sizes..

10-05-09, 11:41 PM	#33
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: USD GSXR1000 k1 forks \| standed forks - curvy Whether you can use a matching SRAD wheel, or whether you need to use later and more expensive K1-K5* wheel *K5 600 and 750. Up to K4 1000 __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

10-05-09, 11:45 PM	#34
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: USD GSXR1000 k1 forks \| standed forks - curvy ok spindle size is 31.5-32mm and shank is 15mm

10-05-09, 11:46 PM	#35
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: USD GSXR1000 k1 forks \| standed forks - curvy wring its 25mm shank

10-05-09, 11:48 PM	#36
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: USD GSXR1000 k1 forks \| standed forks - curvy Yeah mine was a little below 32mm on spindle... pinch on bottom of fork will sort half a mil difference no problem if there is even a difference. (Just remembered I measured practically on where the dust seal would sit, so a little wear here is not out of the question) What about separation between the brake discs? __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

10-05-09, 11:52 PM	#37
Nicky S Member Mega Poster Join Date: Jul 2008 Location: crowborough, East Sussex Posts: 1,061	Re: USD GSXR1000 k1 forks \| standed forks - curvy im off to bed so all we need to know is what wheel discs spindel and calipers i can use. also is there a way to use the sv speedo on the front ?? __________________ Curvy With Lots Of Bits ... But Still More To Come

10-05-09, 11:55 PM	#39
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: USD GSXR1000 k1 forks \| standed forks - curvy what i was thinking is 130mm - 1mm for gsxr discs gives us 129 .. which would give us +1mm either side extra to get the srad wheel into the callipers... hmmmm.. reduction of the calliper mounting faces by 1mm per side would be perfect...

10-05-09, 11:57 PM	#40
Bibio Member Mega Poster Join Date: Jul 2008 Location: here as devil's advocate Posts: 11,569	Re: USD GSXR1000 k1 forks \| standed forks - curvy gsxr front bearing is 25X52X15

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
curvy forks	husky03	For Sale - SV's and SV related items	5	29-10-08 07:10 PM
Curvy forks wanted.	skapegoat	Stuff Wanted	1	22-01-08 07:29 AM
Gsxr Forks On Curvy	CHICKENSTRIPS	SV Talk, Tuning & Tweaking	1	18-07-07 05:45 PM
curvy sv forks fit k4 ???	daddy_sperm	SV Talk, Tuning & Tweaking	2	24-04-05 07:12 PM
Conversion to GSXR1000 front forks ?	Powergaard	SV Talk, Tuning & Tweaking	2	21-01-05 12:12 PM