Would you believe my LED indicators flash too fast?

Nice one ... thanks ....

I think you need a new relay

or resistors in the circuit

oops bit late

Sorry to be thick ........ is the relay plug and go ??

And which size resistor would I need for these indis ??

[Spiderman]

Originally Posted by LK-SV

After a small off last week (the result a broken indicator) ..... I changed the front 2 indicators for these ...

http://www.getgeared.co.uk/Orange_Ov...ycle_Indicator

Now the indicators are flashing too quickly ........ I assume its due the low powered bulbs (which are actually really bright!!!)

Now I hoped changing the rears to match would help ... but it appears (when changing bulbs) that it doesn't

So, are these indicators no good .... do I have to stick with the standard power ones, or can I change something to make them work ok ???

TIA

Post number 8 above says this...

Originally Posted by Spiderman

And yet another chance for me to say.... as long as its below 120flashes per min then they are not too fast.

My old LEDs cators were great cos they were bright and fast and really got noticed.

Forget the resistor and be seen better is my 2p worth.

As long as its legally fast you're fine mate.

Haha, the thread title changed again

OK ...... i'm not keen to start fidling more than neccesary ...

If I was to fit these ....... http://www.halfords.com/webapp/wcs/s...d=-1&x=27&y=14

With the 12v/23w bulbs ........ would they flash normally without the need for a relay or resister ???

Sorry to be so boring !!

Originally Posted by LK-SV

If I was to fit these ....... http://www.halfords.com/webapp/wcs/stores/servlet/SearchCmd?srch=motorbike+indicator&action=search&s toreId=10001&catalogId=10151&langId=-1&x=27&y=14

With the 12v/23w bulbs ........ would they flash normally without the need for a relay or resister ???

Nope just plug them in and they will work you may need to modify the connectors though