Pointy bits - Page 4 - SV650.org

26-09-11, 11:41 PM

Quote:

Originally Posted by Ben Whitcher

Rob- Still havent answered me on Facebook regarding tail tidy pal. Let me know as i would like to receive it as soon as possible.

you never sent a address to send to

PM me one and i'll send it out

(btw, i have no bolts for it... not sure if you can use the current ones or not?

Quote:

Originally Posted by Kenzie

Do you have the toolbox cover and retaining pin?

there was a toolbox cover and retaining pin?! sorry, no...

27-09-11, 09:55 AM

Rob :~) No bolts hmm thats going to be interesting. Any ideas on postage costs and ill PM you over Facebook my address pal.

muzikill · 28-09-11, 12:11 PM

LHS Heel plate? - you didnt sell it with the foot peg/gear change lever did you?

I'd be interested to buy the plate only.

28-09-11, 04:10 PM

Quote:

Originally Posted by muzikill

LHS Heel plate? - you didnt sell it with the foot peg/gear change lever did you?

I'd be interested to buy the plate only.

hmm.. the peg and stuff was knacked, but i might have the heel plate some where... i'll check later for you

29-09-11, 03:26 AM

Quote:

Originally Posted by ImplodedHamster

hiya peoples
Full power ECU - used, good condition £40 posted
Thanks
Rob

Is this ECU two pin or one? If two, please PM me a shipping price to Australia.

29-09-11, 10:27 AM

Its one pin. Two pins start at 2007. His bike was 2003.

29-09-11, 02:56 PM

Quote:

Originally Posted by OZ-SV

Is this ECU two pin or one? If two, please PM me a shipping price to Australia.

Quote:

Originally Posted by Ben Whitcher

Its one pin. Two pins start at 2007. His bike was 2003.

yup, ben is right

thanks

29-09-11, 05:49 PM

Quote:

Originally Posted by ImplodedHamster

hmm.. the peg and stuff was knacked, but i might have the heel plate some where... i'll check later for you

sorry, i binned it due damage...

30-09-11, 09:55 PM

Thanks Ben for that info, will make it easier to find one.

Good luck with the sales ImplodedHamster.

04-10-11, 02:38 PM

engine now gone

bumpty bump

27-09-11, 09:55 AM	#32
Ben Whitcher Guest Posts: n/a	Re: Pointy bits Rob :~) No bolts hmm thats going to be interesting. Any ideas on postage costs and ill PM you over Facebook my address pal.

28-09-11, 12:11 PM	#33
muzikill Member Mega Poster Join Date: Jul 2005 Location: Dunfermline Posts: 1,712	Re: Pointy bits LHS Heel plate? - you didnt sell it with the foot peg/gear change lever did you? I'd be interested to buy the plate only. __________________ Learn to maintain your bike, take it apart, rebuild the engine & more (using better bolts ), drop it & fix it again! K3 Job c.v: Engine:remove/split/rebuild/refit. Replace:Gearbox,Fuel pump,Gaskets. Piston clean,rings. Overhaul:Throttle body,Injectors,Brakes,Forks. Remove/refit:Exhaust,Radiator,Oil cooler,Throttle,Air filter,Tank. Replace: Oil,Coolant,grease,brake hoses & bleed.

29-09-11, 10:27 AM	#36
Ben Whitcher Guest Posts: n/a	Re: Pointy bits Its one pin. Two pins start at 2007. His bike was 2003.

30-09-11, 09:55 PM	#39
OZ-SV Guest Posts: n/a	Re: Pointy bits Thanks Ben for that info, will make it easier to find one. Good luck with the sales ImplodedHamster.

04-10-11, 02:38 PM	#40
ImplodedHamster Guest Posts: n/a	Re: Pointy bits engine now gone bumpty bump

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
last bits k4 pointy	lee67	For Sale - SV's and SV related items	0	03-07-09 09:48 AM
Few Pointy Bits	Girth	For Sale - SV's and SV related items	11	19-05-09 05:40 PM
sv 650 pointy bits	shiver85	Stuff Wanted	1	10-05-08 08:36 PM
K6 Pointy Bits	Baph	For Sale - SV's and SV related items	9	08-05-07 04:00 PM
A Few Little Pointy Bits	Bez	For Sale - SV's and SV related items	4	04-03-07 02:23 AM