Could use the Org's help... - Page 5 - SV650.org

yorkie_chris · 22-02-10, 03:27 PM

rofl.

If I ever win lottery I will buy a 916 RRR SP rare-as-f*ck RRR or whatever the hell they all wank over and rat it. Cammo net, matt black, dead sheep. Be funny as f*ck!

Post pics of the work then...

Promise I won't kill you for chopping up bits of ducrappy.

P.S you complaining about no friends? by sounds of it you'd be well suited to sitting about with us lot and chatting b*ll*cks about bikes over a couple of beers (/babyshams or whatever you drinking)

22-02-10, 03:28 PM

Just go and talk to people, in pubs and that lot. They'll think you're weird and treat you like one of their own.

22-02-10, 03:33 PM

Im afraid ive only got the 1 picture of things taped together after trimming, this was when i was trying to get a look for how the finished article may look when its all sorted, but i have included the picture of the tail hacked up for the none ducati fans to chuckle at

yorkie_chris · 22-02-10, 03:34 PM

What are you doing using those as moulds for laminating your own? Or they actually going to be used as-is?

22-02-10, 03:37 PM

Well ive 2 lines of thinking right now, ive made some brackets that will attach the various pieces together, i can then fiberglass everything together for a smooth finish and then have them painted up, or use the pieces glassed together to attempted to make a mould to make the pieces out of carbon fibre.

I think option 2 is beyond my ability to do at home when im just messing in the spare room.

yorkie_chris · 22-02-10, 03:37 PM

Is it hell!

Look at tygaboys work on bay area riders forum. It is actually not that expensive either.

yorkie_chris · 22-02-10, 03:38 PM

http://forums.sv650.org/showthread.php?t=138568

22-02-10, 03:39 PM

I must admit to being a bit green to fabrication so ive been taking my time as i want a good finish, I shall do some googling, see what i can find from what you've said.

22-02-10, 03:39 PM

that thread has some serious carbon porn in it!

yorkie_chris · 22-02-10, 03:40 PM

I linked to the original thread on BARF too, read the full build it's interesting.

If you are using spare room I would say all you need to rig is some sort of extractor for the dust, or do any sanding work outside.

22-02-10, 03:27 PM	#41
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Could use the Org's help... rofl. If I ever win lottery I will buy a 916 RRR SP rare-as-fck RRR or whatever the hell they all wank over and rat it. Cammo net, matt black, dead sheep. Be funny as fck! Post pics of the work then... Promise I won't kill you for chopping up bits of ducrappy. P.S you complaining about no friends? by sounds of it you'd be well suited to sitting about with us lot and chatting bllcks about bikes over a couple of beers (/babyshams or whatever you drinking) __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

22-02-10, 03:28 PM	#42
EssexDave Guest Posts: n/a	Re: Could use the Org's help... Just go and talk to people, in pubs and that lot. They'll think you're weird and treat you like one of their own.

22-02-10, 03:34 PM	#44
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Could use the Org's help... What are you doing using those as moulds for laminating your own? Or they actually going to be used as-is? __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

22-02-10, 03:37 PM	#45
Avenger Guest Posts: n/a	Re: Could use the Org's help... Well ive 2 lines of thinking right now, ive made some brackets that will attach the various pieces together, i can then fiberglass everything together for a smooth finish and then have them painted up, or use the pieces glassed together to attempted to make a mould to make the pieces out of carbon fibre. I think option 2 is beyond my ability to do at home when im just messing in the spare room.

22-02-10, 03:37 PM	#46
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Could use the Org's help... Is it hell! Look at tygaboys work on bay area riders forum. It is actually not that expensive either. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

22-02-10, 03:38 PM	#47
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Could use the Org's help... http://forums.sv650.org/showthread.php?t=138568 __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

22-02-10, 03:39 PM	#48
Avenger Guest Posts: n/a	Re: Could use the Org's help... I must admit to being a bit green to fabrication so ive been taking my time as i want a good finish, I shall do some googling, see what i can find from what you've said.

22-02-10, 03:39 PM	#49
Avenger Guest Posts: n/a	Re: Could use the Org's help... that thread has some serious carbon porn in it!

22-02-10, 03:40 PM	#50
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Could use the Org's help... I linked to the original thread on BARF too, read the full build it's interesting. If you are using spare room I would say all you need to rig is some sort of extractor for the dust, or do any sanding work outside. __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Is there a problem with the org's servers?	Lozzo	Idle Banter	5	22-01-10 11:17 PM
Who knew it was the Org's 10th birthday?!	missyburd	Idle Banter	15	27-02-09 12:50 PM
SV.ORG's-Where are they now?	Pedrosa	Idle Banter	65	23-12-07 03:47 PM
Sv650.org's What? can 2006	neilhatch	Exhausts	4	22-11-06 04:34 PM
sv650.org's very own david bailey.	kwak zzr	Photos	22	24-07-06 09:00 PM