SV-to-GSXR brake conversions now available - Page 5 - SV650.org

26-04-06, 08:03 PM

The ZX9R and GSXR 6 pots are 90mm spacing, they won't fit on these brackets.

northwind · 26-04-06, 08:57 PM

Not true, there's 2 different versions of the 6s, the ones that were on the SRAD 750 and the ones that were on the K1-K2 thou. The thou ones should fit- I've had a set on my Y-K2 750 forks.

26-04-06, 09:00 PM

Yes, they're the same as the GSX1400 calipers. We know

northwind · 26-04-06, 09:06 PM

Right. So let me get this clear

You know that the GSXR ones fit, and yet you say they don't?

26-04-06, 09:14 PM

The ZX9R calipers that fit GSXRs are 90mm, fact.
There are other 6 pots, but they won't fit on the ninja. I know this because when I broke my ninja I sold my calipers to a mate who used them on his GSXR1100. he had gold 6 pot nissan calipers form an early thou that didn't fit.
So obviously they wouldn't fit my crashed ninja either.
The newer ones are approx 64mm mounting holes I know this because I have them here.
Now tell me about all the other bikes you've had, must be a long list?

northwind · 26-04-06, 09:20 PM

Eh, no, very short. All I'm doing is clarifying something you said that wasn't clear enough here, not getting into a contest about who's owned the most bikes

Your post said "The ZX9R and GSXR 6 pots are 90mm spacing, they won't fit on these brackets" which is true for some of the GSXR 6-pots but not for others. See? What you know doesn't matter if you pass it on wrong.

26-04-06, 09:34 PM

Can I wave my willy as well?

Chill out Razor, this isn't a contest.

27-04-06, 09:59 AM

Quote:

Originally Posted by HighSpeedAssault.com

In regard to SV-to-GSXR caliper conversion kit.

Our kit consists of machined steel adapter plates, machined (lathed) bushings, and hardware (nutes/bolts). NO other part other than the calipers are needed for installation.

00-02/750 and 01-03/600 GSXR calipers are the same.

In regard to warranty, these are for racing/racetrack applications so like any other aftermarket racing components, no warranty.
We will however, replace any defective parts no charge.
What this is, is a steel plate bolted to your GSXR calipers, it just moves the calipers rearward and inward for correct alignment with the stock SV discs.
The steel plates are stronger tham the cast aluminum fork legs they bolt to.
Comes with instructions.

Racetested in 2005, unbelieveable difference in stopping power and lever pressure.

Phone number for credit card orders is
636-922-2811
Ask for "HighSpeedAssault ordering"

We will also have our SV rearsets available soon.
Since most aftermarket rearsets don't elevate footpegs near high enough for racing, we will have our adpater-plates to give you 2.5" up and 2" rear adjustability. These will work in conjunction with oem or any aftermarket non-adjustable rearset.
We will have these on our website and available in under a month.

Hope this answers some questions.
Thanks!
http://www.HighSpeedAssault.com

21QUEST · 27-04-06, 11:23 AM

Quote:

Originally Posted by Razor

Quote:

Originally Posted by HighSpeedAssault.com

In regard to SV-to-GSXR caliper conversion kit.

Our kit consists of machined steel adapter plates, machined (lathed) bushings, and hardware (nutes/bolts). NO other part other than the calipers are needed for installation.

00-02/750 and 01-03/600 GSXR calipers are the same.

In regard to warranty, these are for racing/racetrack applications so like any other aftermarket racing components, no warranty.
We will however, replace any defective parts no charge.
What this is, is a steel plate bolted to your GSXR calipers, it just moves the calipers rearward and inward for correct alignment with the stock SV discs.
The steel plates are stronger tham the cast aluminum fork legs they bolt to.
Comes with instructions.

Racetested in 2005, unbelieveable difference in stopping power and lever pressure.

Phone number for credit card orders is
636-922-2811
Ask for "HighSpeedAssault ordering"

We will also have our SV rearsets available soon.
Since most aftermarket rearsets don't elevate footpegs near high enough for racing, we will have our adpater-plates to give you 2.5" up and 2" rear adjustability. These will work in conjunction with oem or any aftermarket non-adjustable rearset.
We will have these on our website and available in under a month.

Hope this answers some questions.
Thanks!
http://www.HighSpeedAssault.com

Cheers
Ben

Sid Squid · 27-04-06, 12:36 PM

Can we stop this now please?

A public service announcement brought to you by your friendly, (mostly) neighbourhood moderator.

26-04-06, 08:57 PM	#42
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Not true, there's 2 different versions of the 6s, the ones that were on the SRAD 750 and the ones that were on the K1-K2 thou. The thou ones should fit- I've had a set on my Y-K2 750 forks. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

26-04-06, 09:06 PM	#44
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Right. So let me get this clear You know that the GSXR ones fit, and yet you say they don't? __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

26-04-06, 09:20 PM	#46
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	Eh, no, very short. All I'm doing is clarifying something you said that wasn't clear enough here, not getting into a contest about who's owned the most bikes Your post said "The ZX9R and GSXR 6 pots are 90mm spacing, they won't fit on these brackets" which is true for some of the GSXR 6-pots but not for others. See? What you know doesn't matter if you pass it on wrong. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

27-04-06, 12:36 PM	#50
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	Can we stop this now please? A public service announcement brought to you by your friendly, (mostly) neighbourhood moderator. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SV Racing Parts, GSXR Brake Caliper Adapter Brackets, & Galfer SS Brake Lines & Pads	sv-racing-parts	SV Talk, Tuning & Tweaking	42	15-09-11 10:27 PM
Gsxr Brake disks	sv_rory	Stuff Wanted	9	04-02-09 05:23 PM
torque wrench - conversions	skint	Bikes - Talk & Issues	0	12-03-07 09:27 PM
GSXR 600 Brake Pedal?	cb9002	SV Talk, Tuning & Tweaking	3	27-01-07 12:04 PM
Front End conversions	Blue_SV650S	SV Talk, Tuning & Tweaking	27	18-06-06 05:07 PM

26-04-06, 08:03 PM	#41
Razor Guest Posts: n/a	The ZX9R and GSXR 6 pots are 90mm spacing, they won't fit on these brackets.

26-04-06, 09:00 PM	#43
Razor Guest Posts: n/a	Yes, they're the same as the GSX1400 calipers. We know

26-04-06, 09:14 PM	#45
Razor Guest Posts: n/a	The ZX9R calipers that fit GSXRs are 90mm, fact. There are other 6 pots, but they won't fit on the ninja. I know this because when I broke my ninja I sold my calipers to a mate who used them on his GSXR1100. he had gold 6 pot nissan calipers form an early thou that didn't fit. So obviously they wouldn't fit my crashed ninja either. The newer ones are approx 64mm mounting holes I know this because I have them here. Now tell me about all the other bikes you've had, must be a long list?

26-04-06, 09:34 PM	#47
Carsick Guest Posts: n/a	Can I wave my willy as well? Chill out Razor, this isn't a contest.