Adapter plates for GSXR calipers on SV forks - Page 6 - SV650.org

dirtydog · 24-01-08, 10:22 PM

UPDATE!!!!

Right guys this is where we are with these...

Had a load made, went to pick them up and they hadn't coated them so that was the 1st delay. Then i picked them up and trial fitted some to my sv only to find that they didn't fit

so now the fabricator is re-doing them all again.

They've told me they will definitely be ready by the middle of next week

Sorry for the delay on these

24-01-08, 11:10 PM

sounds good

thanks

25-01-08, 12:04 AM

Right on, dirtydog.
I'm hanging in there.

25-01-08, 10:35 AM

Hurrah!

Had best start looking for some GSXR Calipers to put on them

*Heads off to the 'items wanted' section to make a post...*

25-01-08, 03:18 PM

No problem, thanks for the update!!! Just keep up posted with your updates and all is well!

It was -15 C here this morning so I am OK with a slight delay!

25-01-08, 05:50 PM

thanks for the update DD..

07-02-08, 03:42 AM

Any chance I could get a set?

15-02-08, 02:13 PM

Quote:

Originally Posted by dirtydog

right here's some pics of them attached to the bike

Some of you may notice that the bolts don't all match the bolts that i'll be supplying will all be high tensile steel not the stainless steel ones in the pictures

Can you give us the bolt size specs just in case we want to pick up some stainless hardware also?

Any new updates you can share with us at this point?

dirtydog · 15-02-08, 02:20 PM

Blimey barker you must've read my mind i was just about to update this!

Right, I'm going to be supplying these with stainless bolts as the cost of the high tensile bolts was astronomical!!!!!

As for a general update...

I'll be posting them out tomorrow

15-02-08, 02:36 PM

Quote:

Originally Posted by dirtydog

Blimey barker you must've read my mind i was just about to update this!

Right, I'm going to be supplying these with stainless bolts as the cost of the high tensile bolts was astronomical!!!!!

As for a general update...

I'll be posting them out tomorrow

Excellent!!!!

24-01-08, 10:22 PM	#51
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,422	Re: Adapter plates for GSXR calipers on SV forks UPDATE!!!! Right guys this is where we are with these... Had a load made, went to pick them up and they hadn't coated them so that was the 1st delay. Then i picked them up and trial fitted some to my sv only to find that they didn't fit so now the fabricator is re-doing them all again. They've told me they will definitely be ready by the middle of next week Sorry for the delay on these __________________ 2011 Speed Triple 1050

24-01-08, 11:10 PM	#52
sneaky Guest Posts: n/a	Re: Adapter plates for GSXR calipers on SV forks sounds good thanks

25-01-08, 12:04 AM	#53
YZEtc Guest Posts: n/a	Re: Adapter plates for GSXR calipers on SV forks Right on, dirtydog. I'm hanging in there.

25-01-08, 10:35 AM	#54
Steve_God Guest Posts: n/a	Re: Adapter plates for GSXR calipers on SV forks Hurrah! Had best start looking for some GSXR Calipers to put on them Heads off to the 'items wanted' section to make a post... Last edited by Steve_God; 25-01-08 at 10:45 AM.

25-01-08, 03:18 PM	#55
barker615 Guest Posts: n/a	Re: Adapter plates for GSXR calipers on SV forks No problem, thanks for the update!!! Just keep up posted with your updates and all is well! It was -15 C here this morning so I am OK with a slight delay!

25-01-08, 05:50 PM	#56
mc_phers0n Guest Posts: n/a	Re: Adapter plates for GSXR calipers on SV forks thanks for the update DD..

07-02-08, 03:42 AM	#57
cras4u Guest Posts: n/a	Re: Adapter plates for GSXR calipers on SV forks Any chance I could get a set?

15-02-08, 02:20 PM	#59
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,422	Re: Adapter plates for GSXR calipers on SV forks Blimey barker you must've read my mind i was just about to update this! Right, I'm going to be supplying these with stainless bolts as the cost of the high tensile bolts was astronomical!!!!! As for a general update... I'll be posting them out tomorrow __________________ 2011 Speed Triple 1050

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
For sale GSXR adapter plates. £50	thefallenangel	For Sale - SV's and SV related items	0	31-03-09 08:28 PM
SV / GSXR front brake calliper adapter plates SOLD	charlie13	For Sale - SV's and SV related items	12	08-03-09 04:59 PM
GSXR brake adapter plates	dirtydog	For Sale - SV's and SV related items	17	12-09-08 11:21 AM
GSXR/SV1000 Calipers On SV650-Adapter Plates	21QUEST	SV Talk, Tuning & Tweaking	49	25-03-08 02:40 PM
GSXR Caliper Adapter Plates	NedSVS	SV Talk, Tuning & Tweaking	10	27-01-07 09:59 PM