hydrolocked engine grrrrrrrrrrrrrrr - Page 8 - SV650.org

farquare · 18-06-11, 07:08 PM

Well, after sunday's ride my clutch arm was pretty sore. I decided to look at the clutch components to see if there was a problem there. Cable was moving freely in it's sheeth so I gave a liberal dose of tri-flo just to be safe.
I took the worm drive off and cleaned out in a tub of paraffin then re-packed with grease and adjusted as per the manual.
Time will tell if its any better or if im just a wimp.
Also changed the oil and filter while I was at it

Sent from my U20i using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Engine oil change - 5 months no engine starting	sv650sfan	SV Talk, Tuning & Tweaking	2	04-03-11 08:10 AM
Engine cleaning b4 engine strip w.i.p	muzikill	Photos	2	16-01-11 06:20 PM
engine bolts for point engine	pookie	Stuff Wanted	6	01-10-10 01:50 PM
Engine Breaking? Hopefully not. Engine braking - is that OK?	butterick99	SV Talk, Tuning & Tweaking	14	12-09-09 10:31 PM
Engine braking... any hazzards engine wise?	John 675	SV Talk, Tuning & Tweaking	21	28-03-08 07:20 PM

18-06-11, 07:08 PM	#71
farquare Member Join Date: Apr 2008 Location: Glasgow Posts: 75	Well, after sunday's ride my clutch arm was pretty sore. I decided to look at the clutch components to see if there was a problem there. Cable was moving freely in it's sheeth so I gave a liberal dose of tri-flo just to be safe. I took the worm drive off and cleaned out in a tub of paraffin then re-packed with grease and adjusted as per the manual. Time will tell if its any better or if im just a wimp. Also changed the oil and filter while I was at it Sent from my U20i using Tapatalk