K4 onwards Lower Fairing Brackets - SV650.org

Mr_Chin · 30-08-09, 01:37 PM

Very, very stupid request, but has anyone got a full set of K4+ lower fairing brackets for sale? I managed to get some YC2 lower fairings for £50, BIN, off egay

, and now need a bracket kit. Awaiting, in hope, for a response. Cheers, Chin

phil24_7 · 30-08-09, 07:17 PM

Good luck, I've been looking for some for a long time!!

May be worth making your own if your so inclined!

30-08-09, 08:23 PM

as the saying goes "their as rare as hens teeth" watch ebay and prepare to bid high.

Mr_Chin · 30-08-09, 08:39 PM

I'm competent enough to make my own TBH, so in all honesty, I just need the two circle cover plastics, which cover the engine mount bolts (the big holes in the fairing). I cannot for the life of me justify paying £114 plus postage for a full set of brackets. Most of the mounts look like easy enough to attach to the fairings, one to the upper cowl (no bracket needed here), one to the rad end, and one to the rear of the engine where my exisiting bellypan bracket is. So in all honesty, I just need to make a bracket from the rad ends?. Just thought I'd ask on a wim if anyone had some going, you never know? I might not even need the circle covers, as I have crash bungs, and think these would fit into the holes, as the lowers are the OEM Suzuki ones BTW. Thanks for the 'helpful' responses to my wish list

Chin

phil24_7 · 30-08-09, 08:49 PM

R&G bungs replace the side brackets and black circle covers.

HTH

Mr_Chin · 30-08-09, 08:54 PM

Quote:

Originally Posted by phil24_7

R&G bungs replace the side brackets and black circle covers.

HTH

That, Mr phil24_7, does help. I don't need any brackets then

(£114 better off too), as those holes were my main worry. I'll be making my own brackets then.

Cheers

Chin

phil24_7 · 31-08-09, 12:27 PM

Anytime bud, glad I could help you save a little time/money!

Good luck with making the other brackets. Once you have, perhaps you could help a few of us other orgers out for suitable remuneration?!

Regards
Phil

Mr_Chin · 31-08-09, 01:32 PM

Cheers Phil24_7, I've just had a good look at a set of fairing brackets online. The two rear bottom brackets are exactly the same as the ones that came with my OEM belly pan, which I'll use to attach the lowers. My crash bungs will hold the big centre fairing holes, one looks like it just attaches to the upper front cowl, and the last one will need a little U piece to attach to the radiator. Job done. Looks like there's no need for me to bend over for the £114 that Suzuki are asking for

. Doesn't look like I'll be in the lower fairing brackets selling game any time soon - I just want mine attached - selfish? I know. I actually didn't want lower fairings, as I'd just bought an OEM Belly pan and I love the look of the Vee Two engine, but at £50 BIN, I just had to buy the lowers. Cheers Chin

phil24_7 · 31-08-09, 02:23 PM

If I'd have seen them, I'd have bought them too. I love having spares!! lol

Nobbylad · 01-09-09, 02:36 PM

I made those U shaped brackets with some strip ally I had from B&Q (cost around a quid I think), using these dimensions...works a treat!

http://forums.sv650.org/showpost.php...30&postcount=9

30-08-09, 01:37 PM	#1
Mr_Chin Member Join Date: Mar 2008 Location: Hertfordshire Posts: 514	K4 onwards Lower Fairing Brackets Very, very stupid request, but has anyone got a full set of K4+ lower fairing brackets for sale? I managed to get some YC2 lower fairings for £50, BIN, off egay , and now need a bracket kit. Awaiting, in hope, for a response. Cheers, Chin __________________ - SK4.SV650.2004.YC2 - D3N15

30-08-09, 07:17 PM	#2
phil24_7 Member Mega Poster Join Date: Jan 2007 Location: Plymouth, England Posts: 3,787	Re: K4 onwards Lower Fairing Brackets Good luck, I've been looking for some for a long time!! May be worth making your own if your so inclined! __________________ Phil I'm not here for a long time, I'm here for a good time! Blue SV650 K3, GSX-R K5 front end, TL1000S clip-ons, lower fairings, seat cowl, gel seat, Pyramid undertray, R&G crash bungs, stainless steel bar ends, full titanium Akrapovic exhaust, Power Commander, clear rear light, flush mount front indys, mini rear indys, Autocom 300 duo intercom, Acumen cat 1 alarm and Micheline Pilot Power 2ct's.

30-08-09, 08:23 PM	#3
kwak zzr Guest Posts: n/a	Re: K4 onwards Lower Fairing Brackets as the saying goes "their as rare as hens teeth" watch ebay and prepare to bid high.

30-08-09, 08:39 PM	#4
Mr_Chin Member Join Date: Mar 2008 Location: Hertfordshire Posts: 514	Re: K4 onwards Lower Fairing Brackets I'm competent enough to make my own TBH, so in all honesty, I just need the two circle cover plastics, which cover the engine mount bolts (the big holes in the fairing). I cannot for the life of me justify paying £114 plus postage for a full set of brackets. Most of the mounts look like easy enough to attach to the fairings, one to the upper cowl (no bracket needed here), one to the rad end, and one to the rear of the engine where my exisiting bellypan bracket is. So in all honesty, I just need to make a bracket from the rad ends?. Just thought I'd ask on a wim if anyone had some going, you never know? I might not even need the circle covers, as I have crash bungs, and think these would fit into the holes, as the lowers are the OEM Suzuki ones BTW. Thanks for the 'helpful' responses to my wish list Chin __________________ - SK4.SV650.2004.YC2 - D3N15

30-08-09, 08:49 PM	#5
phil24_7 Member Mega Poster Join Date: Jan 2007 Location: Plymouth, England Posts: 3,787	Re: K4 onwards Lower Fairing Brackets R&G bungs replace the side brackets and black circle covers. HTH __________________ Phil I'm not here for a long time, I'm here for a good time! Blue SV650 K3, GSX-R K5 front end, TL1000S clip-ons, lower fairings, seat cowl, gel seat, Pyramid undertray, R&G crash bungs, stainless steel bar ends, full titanium Akrapovic exhaust, Power Commander, clear rear light, flush mount front indys, mini rear indys, Autocom 300 duo intercom, Acumen cat 1 alarm and Micheline Pilot Power 2ct's.

31-08-09, 12:27 PM	#7
phil24_7 Member Mega Poster Join Date: Jan 2007 Location: Plymouth, England Posts: 3,787	Re: K4 onwards Lower Fairing Brackets Anytime bud, glad I could help you save a little time/money! Good luck with making the other brackets. Once you have, perhaps you could help a few of us other orgers out for suitable remuneration?! Regards Phil __________________ Phil I'm not here for a long time, I'm here for a good time! Blue SV650 K3, GSX-R K5 front end, TL1000S clip-ons, lower fairings, seat cowl, gel seat, Pyramid undertray, R&G crash bungs, stainless steel bar ends, full titanium Akrapovic exhaust, Power Commander, clear rear light, flush mount front indys, mini rear indys, Autocom 300 duo intercom, Acumen cat 1 alarm and Micheline Pilot Power 2ct's.

31-08-09, 01:32 PM	#8
Mr_Chin Member Join Date: Mar 2008 Location: Hertfordshire Posts: 514	Re: K4 onwards Lower Fairing Brackets Cheers Phil24_7, I've just had a good look at a set of fairing brackets online. The two rear bottom brackets are exactly the same as the ones that came with my OEM belly pan, which I'll use to attach the lowers. My crash bungs will hold the big centre fairing holes, one looks like it just attaches to the upper front cowl, and the last one will need a little U piece to attach to the radiator. Job done. Looks like there's no need for me to bend over for the £114 that Suzuki are asking for . Doesn't look like I'll be in the lower fairing brackets selling game any time soon - I just want mine attached - selfish? I know. I actually didn't want lower fairings, as I'd just bought an OEM Belly pan and I love the look of the Vee Two engine, but at £50 BIN, I just had to buy the lowers. Cheers Chin __________________ - SK4.SV650.2004.YC2 - D3N15

31-08-09, 02:23 PM	#9
phil24_7 Member Mega Poster Join Date: Jan 2007 Location: Plymouth, England Posts: 3,787	Re: K4 onwards Lower Fairing Brackets If I'd have seen them, I'd have bought them too. I love having spares!! lol __________________ Phil I'm not here for a long time, I'm here for a good time! Blue SV650 K3, GSX-R K5 front end, TL1000S clip-ons, lower fairings, seat cowl, gel seat, Pyramid undertray, R&G crash bungs, stainless steel bar ends, full titanium Akrapovic exhaust, Power Commander, clear rear light, flush mount front indys, mini rear indys, Autocom 300 duo intercom, Acumen cat 1 alarm and Micheline Pilot Power 2ct's.

01-09-09, 02:36 PM	#10
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Re: K4 onwards Lower Fairing Brackets I made those U shaped brackets with some strip ally I had from B&Q (cost around a quid I think), using these dimensions...works a treat! http://forums.sv650.org/showpost.php...30&postcount=9

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
brackets for lower fairing on curvey	maclovin	Stuff Wanted	4	16-09-09 04:58 AM
Fairing brackets lower left/right - SV1000S	neilhatch	Stuff Wanted	1	03-07-09 01:32 PM
curvy lower fairing brackets	ocr_sv	For Sale - SV's and SV related items	1	29-06-09 01:30 AM
Suzuki lower fairing brackets	sv_nutter	SV Talk, Tuning & Tweaking	9	19-01-08 11:42 AM
k2 lower fairing brackets	erics02	Stuff Wanted	3	11-11-07 12:56 AM