I dont have the horn! - SV650.org

07-02-06, 04:44 PM

So I was about to book up an MOT this afternoon so I can flog my SV with a full 12 months. I get to a roundabout and some daft **** cuts me up. I use my horn. Nothing.

Now I know I got my earplugs in so maybe I just cant hear it. Try it at home on the stand. Nothing.

I've undone the horn unit and plugged it directly into my battery. Nearly blew my head off. Works a treat.

I've checked all the wiring. It all seems to be ok.

I've checked the switch. Ditto.

But the blood horn will not work when set up!

Any clues??

northwind · 07-02-06, 05:06 PM

Mine have just stopped working too, maybe it's infectious?

Is it a standard horn?

07-02-06, 05:08 PM

It's right in the path of the crap off the front wheel. Take it off, disconnect the wires and clean the terminals. Spray some WD40 in the connectors and put it all back together. It might just be the corrosion that has stopped it working.

07-02-06, 05:18 PM

Yup - standard horn.

Cleaning hasn't worked....

dirtydog · 07-02-06, 05:26 PM

mine had a wire that had partially snapped but i couldn't really seeit till actually broke the wire while i was checking it. the horn worked when i turned left though

Spiderman · 07-02-06, 05:40 PM

I had a very similar problem...and i couldnt undo the bolt to get it off either.
So a toothbrush helped clean it up a bit and i think it was just a random bit of grit between the two plates stopping it from working.
It didnt work after i tested it a few times and i thought i'd have to get a new one.
Next day, it was fine, dunno why and has worked ever since.

I still reckon it was a random bit og grit between the plates but if yours worked when connected directly then i'd suggest you run some new wiring to it seperately to the one thats there already. Maybe it works at one angle and not another. Silly i know but its a maybe.

07-02-06, 06:53 PM

Brand new K5 at this end. Picked it up in August, rode a wee bit here and there (oh yeah- and there too), nice dry weather - horn packs up. Let it "cool" down and bingo off it goes again. Just how hot I ask myself?

I reckon the std horn is just shoot. I'm tempted to have a look at aftermarket like Jim@55 has fitted. They'd be LOUDER too which can't be bad.

You could try fidling with the tuning screw on a std disc horn since perhaps the set frequency is just right for generating its own heat - who knows?

Cheers,
Garry

Sid Squid · 07-02-06, 09:16 PM

If it's not working at all, ever, then it's probable that you have a wiring/connection fault rather than the well documented rubbish horn syndrome. When checking remember that the horn is switched on the neutral, (ground), that is; it's permanently live and the neutral is simply grounded when you press the button.

07-02-06, 10:49 PM

change it ,,get ring/fiamm ones @about 15£ from halfwits ,,,,much btr (really loud and easy to fit,eh garry

)

07-02-06, 10:50 PM

When mine packs in I'm going to fit some airhorns I think. Can't be too hard, and there's loads of room behind the fairings.

07-02-06, 04:44 PM	#1
Mervin Guest Posts: n/a	I dont have the horn! So I was about to book up an MOT this afternoon so I can flog my SV with a full 12 months. I get to a roundabout and some daft **** cuts me up. I use my horn. Nothing. Now I know I got my earplugs in so maybe I just cant hear it. Try it at home on the stand. Nothing. I've undone the horn unit and plugged it directly into my battery. Nearly blew my head off. Works a treat. I've checked all the wiring. It all seems to be ok. I've checked the switch. Ditto. But the blood horn will not work when set up! Any clues??

07-02-06, 05:06 PM	#2
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,082	Mine have just stopped working too, maybe it's infectious? Is it a standard horn? __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

07-02-06, 05:26 PM	#5
dirtydog Knob faced knobster Mega Poster Join Date: Jan 2005 Location: Haslemere Posts: 5,419	mine had a wire that had partially snapped but i couldn't really seeit till actually broke the wire while i was checking it. the horn worked when i turned left though __________________ 2001 SV650 in shimmerin green, Not broken anymore

07-02-06, 05:40 PM	#6
Spiderman Where the hell am I? Mega Poster Join Date: Dec 2004 Location: Swingin' thru the urban jungle Posts: 7,451	I had a very similar problem...and i couldnt undo the bolt to get it off either. So a toothbrush helped clean it up a bit and i think it was just a random bit of grit between the two plates stopping it from working. It didnt work after i tested it a few times and i thought i'd have to get a new one. Next day, it was fine, dunno why and has worked ever since. I still reckon it was a random bit og grit between the plates but if yours worked when connected directly then i'd suggest you run some new wiring to it seperately to the one thats there already. Maybe it works at one angle and not another. Silly i know but its a maybe. __________________ . "Computers are great! Not for communicating tho. They have one fundamental flaw ... they don't have eyebrows." AlpineCarStereo: you win ....... eeerrr ..... ummm ..... my undying support of you, the greatest Mod this forum has ever known. My Leige. davepreston: i bow to your modding godliness. vixis: He's this really cute Persian tea-boy, Im so not giving you his number :P

07-02-06, 09:16 PM	#8
Sid Squid No, I don't lend tools. Mega Poster Join Date: Jul 2003 Location: Skunk Works, Nth London Posts: 8,680	If it's not working at all, ever, then it's probable that you have a wiring/connection fault rather than the well documented rubbish horn syndrome. When checking remember that the horn is switched on the neutral, (ground), that is; it's permanently live and the neutral is simply grounded when you press the button. __________________ If an SV650 has a flat tyre in the forest and no-one is there to blow it up, how long will it be 'til someone posts that the reg/rec is duff and the world will end unless a CBR unit is fitted? A little bit of knowledge = a dangerous thing. "a deathless anthem of nuclear-strength romantic angst"

07-02-06, 05:08 PM	#3
Scoobs Guest Posts: n/a	It's right in the path of the crap off the front wheel. Take it off, disconnect the wires and clean the terminals. Spray some WD40 in the connectors and put it all back together. It might just be the corrosion that has stopped it working.

07-02-06, 05:18 PM	#4
Mervin Guest Posts: n/a	Yup - standard horn. Cleaning hasn't worked....

07-02-06, 06:53 PM	#7
independentphoto Guest Posts: n/a	Brand new K5 at this end. Picked it up in August, rode a wee bit here and there (oh yeah- and there too), nice dry weather - horn packs up. Let it "cool" down and bingo off it goes again. Just how hot I ask myself? I reckon the std horn is just shoot. I'm tempted to have a look at aftermarket like Jim@55 has fitted. They'd be LOUDER too which can't be bad. You could try fidling with the tuning screw on a std disc horn since perhaps the set frequency is just right for generating its own heat - who knows? Cheers, Garry

07-02-06, 10:49 PM	#9
jim@55 Guest Posts: n/a	change it ,,get ring/fiamm ones @about 15£ from halfwits ,,,,much btr (really loud and easy to fit,eh garry )

07-02-06, 10:50 PM	#10
Saint Matt Guest Posts: n/a	When mine packs in I'm going to fit some airhorns I think. Can't be too hard, and there's loads of room behind the fairings.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
dont get it ?	stewie	Idle Banter	7	02-09-08 07:03 PM
I want to get the horn	maultin	SV Talk, Tuning & Tweaking	11	25-06-08 11:57 PM
dont believe it	ljharmitt	Bikes - Talk & Issues	16	03-10-07 06:54 PM
i dont know why?	kwak zzr	Idle Banter	18	10-01-07 11:11 PM
Hey Greg, dont lock posts just because you dont agree!	AlanSv	SV Talk, Tuning & Tweaking	110	20-11-04 05:21 PM