SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 21-09-24, 12:10 PM   #1
Ketharrow
Junior Member
 
Join Date: Sep 2024
Posts: 1
Default Rebuilding/overhauling my gen1

Good evening everyone, i hope i find you all well! 🙂
Wanted to ask for some opinion/advice and maybe get pointed towards the right direction.
It is regarding the cylinder barrels.
I'm rebuilding my gen1 and with the cylinder's measurements I've taken so far it looks like the barrels are neither round or cylindrical any more and in some parts of it out of the manual's given limits.
There are a couple of vertical scratches but not deep. I've read that busa pistons are a common swap, needing a bit of honing at the same time to compensate for the piston to barrel clearance specs. The next option if i want to keep stock bore is the Gladius' cylinders if they are compatible with the rest of the gen1 engine block(any advantage of the upgraded plated cylinder sleeves(?)). Another option is reboring the existing ones to 83mm which in that case i don't know if it'd also need stronger conrods-crank(?)
Also i have been thinking of trying to get the sleeves out and have new made and fitted. Has anyone had any experience going down that road?
If anyone has any info to share please do so.

Any help is more than appreciated!!🙂
Ketharrow is offline   Reply With Quote
Old 21-09-24, 08:21 PM   #2
admin
John T
Mega Poster
 
admin's Avatar
 
Join Date: May 2003
Location: Shrewsbury, Shrops, UK
Posts: 2,491
Default Re: Rebuilding/overhauling my gen1

I can't offer any real advice on this but I have heard that busa pistons do fit. It might be worth looking at James Holland Racing website. James knows SV's inside out and developed the original 750 conversion.

https://www.jhsracing.co.uk/

Sent from my SM-T510 using Tapatalk
__________________
Admin for this forum and the main site. John@sv650.org
admin is offline   Reply With Quote
Old 21-09-24, 09:27 PM   #3
garynortheast
Member
Mega Poster
 
garynortheast's Avatar
 
Join Date: Mar 2010
Location: Mid Wales
Posts: 2,586
Default Re: Rebuilding/overhauling my gen1

There's a photo thread here about Haybusa pistons. Not sure which model of SV it refers to though.

**Edit** Just looked and it's for a Pointy.

Last edited by garynortheast; 21-09-24 at 09:29 PM.
garynortheast is online now   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Crash.NET - Lorenzo: I will put all my efforts into overhauling Rossi NewsBot News 0 14-10-15 09:00 AM
Rebuilding SV after blow-up PhilCBR SV Talk, Tuning & Tweaking 14 23-04-10 12:37 PM
Rebuilding the SV fighter. Grinch SV Talk, Tuning & Tweaking 34 27-08-09 05:44 PM
Rebuilding calipers? irl_dar SV Talk, Tuning & Tweaking 54 06-03-09 10:33 PM
rebuilding SVS, do I have a choice of motor? dizzzzz SV Talk, Tuning & Tweaking 1 14-01-07 02:38 PM


All times are GMT. The time now is 08:34 PM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.