Micron delta+ can help

I've got my self a delta+ can with removeable baffle but the baffle is stuck solid I've stripped the can ready for a stubby job on it and cant see any reason for it to be stuck (I've removed the rivet)

Its doing my head in!!

its got silocan sealent in it mate just get pliers and yank it out

Originally Posted by sv650nutter149

its got silocan sealent in it mate just get pliers and yank it out

I've heated it, hit it with a hammer and the fecker still won't come out

[21QUEST]

Originally Posted by svrash

I've heated it, hit it with a hammer and the fecker still won't come out

That's because the delta+ cans(earlier ones at least) are not designed to be easily removeable


Ben

you have to remove the end cap and grind off a weld to adapt the can to make it removable, its been done to both mine.

tbh i wouldnt bother, the baffles on the delta + are only tubes with no resistance anyhow so i just leave mine in, it makes little or no diff to the sound if they are in or out.

Originally Posted by kwak zzr

you have to remove the end cap and grind off a weld to adapt the can to make it removable, its been done to both mine.

That makes sence I've aready broken one weld trying to get the baffle out

[Rich]

I've got a delta plus you can remove the baffle easy..

1) undo the baffle screw holding it to exhaust

2) Push baffle inside can as far as you can

3) look up inside the top of the exhaust and just inside is a bolt holding the end of the can on

4) undo with an allen key, take off the end of the exhaust (the whole end of it)

5) pull out baffle, replace the end making sure not to trap the exhausts packing. Can be abit fiddley but you can do it!!

6) ENJOY!!!

Hope that helps you!!!

I done it i had to file down 3 welds that held the baffle to the end cap

The baffle was welded to the 3 prong bracket so no wonder it didn't want to come out

the new delta + cans are made so they do come out.