SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 09-04-13, 08:38 AM   #1
Pricey12
Guest
 
Posts: n/a
Default Kawasaki 636 BH1 rear shock bottom bolt part number?

Morning All

I will be getting hold of one of the above shocks in the next week or so - does anyone happen to know the part number for the bottom bolt that I will need when it is installed to my SV?

Thanks
  Reply With Quote
Old 09-04-13, 09:03 AM   #2
Serdna
Guest
 
Posts: n/a
Default Re: Kawasaki 636 BH1 rear shock bottom bolt

Even with the part number i couldn't find it on line. I ended up going to a local mechanic who ordered the Kwak bolt in for me. Even with the correct bolt it will foul the dogbones if you don't shorten it. Unless i got the wrong bolt. If you are cutting the bolt be sure to put the nut fully on first, then after cutting when you remove the nut and it will clean the end of the thread nicely.

If you are messing around down there for the first time make sure you do it back up with a torque wrench and some medium locktite. There was a thread on here a few months back where a bolt was overtightened on the linkage and it cracked the frame.
  Reply With Quote
Old 09-04-13, 09:12 AM   #3
Pricey12
Guest
 
Posts: n/a
Default Re: Kawasaki 636 BH1 rear shock bottom bolt

Quote:
Originally Posted by Serdna View Post
Even with the part number i couldn't find it on line. I ended up going to a local mechanic who ordered the Kwak bolt in for me. Even with the correct bolt it will foul the dogbones if you don't shorten it. Unless i got the wrong bolt. If you are cutting the bolt be sure to put the nut fully on first, then after cutting when you remove the nut and it will clean the end of the thread nicely.

If you are messing around down there for the first time make sure you do it back up with a torque wrench and some medium locktite. There was a thread on here a few months back where a bolt was overtightened on the linkage and it cracked the frame.
I've had a read of some threads on here an it looks like there may be two different length bolts, depending on which year the shock is. I have a feeling I may have to find someone to fit the shock for me as I'm guaranteed to make a mess of it otherwise...
  Reply With Quote
Old 09-04-13, 09:17 AM   #4
Serdna
Guest
 
Posts: n/a
Default Re: Kawasaki 636 BH1 rear shock bottom bolt

Its not quite as easy as the threads on here make out I found(mostly due to the bolt cutting/spacing out the dogbones with washers fiasco), but its defo doable. If you can find an Organ with experiance who will help you, you will be fine. If you wanna come all the way to oxford I can help!
  Reply With Quote
Old 09-04-13, 09:21 AM   #5
Pricey12
Guest
 
Posts: n/a
Default Re: Kawasaki 636 BH1 rear shock bottom bolt part number?

Thanks for the offer mate, but may be a bit far

May have to hold onto the shock for a bit when I get it until I figure out how to get it fitted.
  Reply With Quote
Old 09-04-13, 09:44 AM   #6
jambo
Member
Mega Poster
 
jambo's Avatar
 
Join Date: Aug 2003
Location: Croydonia
Posts: 5,376
Default Re: Kawasaki 636 BH1 rear shock bottom bolt part number?

Order the parts for any ZX6R lower shock bolt between about 1998 - 2008 (I suspect up until current would be fine). I've installed 2 of these shocks in curvies and not yet needed to cut a bolt. You will notice if you put it in one way round it fouls, if you put it in the other it's fine (the distance from the shock bottom to the dogbones is not symmetrical).

Microfiche is here

You need parts:
92151-1601 BOLT,FLANGED,10X62
92210-1139 NUT,LOCK,FLANGED,10MM

Your local Kawasaki dealer can get these for you.

Jambo
__________________
Modern motorcycles are bloody brilliant, enjoy it while we can
jambo is offline   Reply With Quote
Old 09-04-13, 09:50 AM   #7
Pricey12
Guest
 
Posts: n/a
Default Re: Kawasaki 636 BH1 rear shock bottom bolt part number?

Thanks Jambo
  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help, I've screwed up the bottom shock bolt hongman SV Talk, Tuning & Tweaking 123 06-09-12 04:28 PM
Help! Someone else has (possibly) screwed up the shock bottom bolt! dirtyred619 SV Talk, Tuning & Tweaking 20 27-08-12 09:01 PM
Kawasaki zx636 c1h rear shock headrush1 For Sale - Other Bikes and General biking items 2 29-11-11 01:48 PM
rear shock nut and bolt for a diff shock drag Stuff Wanted 0 22-04-08 03:52 PM
Anyone Know: Part number for a bolt? Kinvig SV Talk, Tuning & Tweaking 13 12-10-06 03:16 PM


All times are GMT. The time now is 11:45 AM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.