SV650.org - SV650 & Gladius 650 Forum



Bikes - Talk & Issues Newsworthy and topical general biking and bike related issues. No crapola!
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 08-02-24, 10:41 AM   #1
Craig380
Member
Mega Poster
 
Join Date: May 2015
Posts: 1,273
Default Brake fluid musings

I last changed the brake fluid on my 2017 Gen 3 (with ABS) in December 2021. Yesterday I thought I'd check the condition of the fluid out of curiosity. The moisture level was still below 1%, which is still well on the safe side. The fluid is just Comma DOT4 (£6 a litre from the local motor factors), nothing special.

I do around 11 to 12K miles per year on the bike and while it is garaged, the garage is not heated and is a bit draughty. It shows that in the UK climate, even basic brake fluid can last well beyond the usual recommendation to change / flush every 2 years.
Craig380 is offline   Reply With Quote
Old 08-02-24, 11:07 AM   #2
Bibio
Member
Mega Poster
 
Bibio's Avatar
 
Join Date: Jul 2008
Location: here as devil's advocate
Posts: 11,552
Default Re: Brake fluid musings

i've services bikes where the fluid has been black and the brakes still worked perfect. i personally think its the manufacturers covering their behind or its just to sell more fluid.
Bibio is offline   Reply With Quote
Old 08-02-24, 11:47 AM   #3
Craig380
Member
Mega Poster
 
Join Date: May 2015
Posts: 1,273
Default Re: Brake fluid musings

I think in some climates with high humidity / high temperatures, brake fluid will go off quickly ... but not in the UK!
Craig380 is offline   Reply With Quote
Old 08-02-24, 11:48 AM   #4
glang
Member
 
Join Date: Oct 2007
Posts: 567
Default Re: Brake fluid musings

I do like the flexible rubber seal used in motorcycle master cylinders and I think this helps keep the fluid dry compared with cars which in general just have an vent open to atmosphere to allow for changes in fluid level...
glang is offline   Reply With Quote
Old 08-02-24, 12:30 PM   #5
admin
John T
Mega Poster
 
admin's Avatar
 
Join Date: May 2003
Location: Shrewsbury, Shrops, UK
Posts: 2,491
Default Re: Brake fluid musings

I changed the fluid in my VFR every two years. I could see the fluid going darker as it aged. I could definitely feel the difference after changing. Also ABS pumps don't like moisture and can corrode, simpler to change fluid than a frozen ABS unit.

Sent from my SM-T510 using Tapatalk
__________________
Admin for this forum and the main site. John@sv650.org
admin is offline   Reply With Quote
Old 08-02-24, 02:31 PM   #6
redtrummy
Member
 
Join Date: Jan 2019
Location: N W Leicestershire
Posts: 262
Default Re: Brake fluid musings

My mechanic, if I suggested a brake fluid change on the car would ask 'why'
redtrummy is offline   Reply With Quote
Old 08-02-24, 02:36 PM   #7
glang
Member
 
Join Date: Oct 2007
Posts: 567
Default Re: Brake fluid musings

My SV was completely underwater for more than 5 days so I changed the brake fluid but probably didnt need to...
glang is offline   Reply With Quote
Old 23-03-24, 04:44 PM   #8
SV650rules
Member
Mega Poster
 
Join Date: Nov 2016
Location: Shropshire UK
Posts: 1,363
Default Re: Brake fluid musings

Quote:
Originally Posted by glang View Post
I do like the flexible rubber seal used in motorcycle master cylinders and I think this helps keep the fluid dry compared with cars which in general just have an vent open to atmosphere to allow for changes in fluid level...



Automotive brake fluid reservoirs have a vent in the actual lid, but below the lid is a flexible membrane that has a collar ( sometimes pressed down by the lid to seal better) that is a tight fit in the neck of the reservoir and the membrane will allow level in reservoir to rise or fall while sealing the fluid from the atmosphere... The pinhole vent in the actual lid is just to allow the air above the flexible membrane to equalise and not build up pressure or vacuum as the membrane does its job. I have had a MityVac for may years and bleed the brakes on our cars and bikes about every 3 years. The MityVac makes it super easy to vacuum bleed the brakes - vacuum bleeding means that any air bubbles in the system will grow a lot larger under vacuum and be easier to suck out, and as long as you keep the vacuum on as you retighten the bleed nipple any remaining air bubbles will be massively reduced in size when subject to atmospheric pressure.


https://www.amazon.co.uk/Mityvac-MV8...dp/B00265M9SS/
__________________
2016 SV650 AL7

Courage is resistance to fear, mastery of fear, not absence of fear - Mark Twain

Last edited by SV650rules; 23-03-24 at 04:52 PM.
SV650rules is offline   Reply With Quote
Old 23-03-24, 04:49 PM   #9
SV650rules
Member
Mega Poster
 
Join Date: Nov 2016
Location: Shropshire UK
Posts: 1,363
Default Re: Brake fluid musings

Quote:
Originally Posted by admin View Post
I changed the fluid in my VFR every two years. I could see the fluid going darker as it aged. I could definitely feel the difference after changing. Also ABS pumps don't like moisture and can corrode, simpler to change fluid than a frozen ABS unit.

Sent from my SM-T510 using Tapatalk

Agreed, flushing out old fluid is just good maintenance practice, and can prevent much more expensive problems happening. I have used a MityVac for many years now and it makes brake flushing super easy and clean, and a proper 'one man' job, even on cars.
__________________
2016 SV650 AL7

Courage is resistance to fear, mastery of fear, not absence of fear - Mark Twain
SV650rules is offline   Reply With Quote
Old 23-03-24, 05:48 PM   #10
glang
Member
 
Join Date: Oct 2007
Posts: 567
Default Re: Brake fluid musings

Quote:
Originally Posted by SV650rules View Post
Automotive brake fluid reservoirs have a vent in the actual lid, but below the lid is a flexible membrane that has a collar ( sometimes pressed down by the lid to seal better) that is a tight fit in the neck of the reservoir and the membrane will allow level in reservoir to rise or fall while sealing the fluid from the atmosphere... The pinhole vent in the actual lid is just to allow the air above the flexible membrane to equalise and not build up pressure or vacuum as the membrane does its job.
Hmmm Ive never seen one of those in a car only on bikes and I assumed it was because theyre more exposed to the elements but maybe it depends on the manufacturer...
glang is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DOT 5 Brake Fluid DJ123 SV Talk, Tuning & Tweaking 4 04-08-11 09:14 AM
Is this brake fluid okay for the SV? Scythe92 SV Talk, Tuning & Tweaking 8 29-03-11 11:13 AM
Brake Bleed nipple/Mityvac/Brake Fluid query Ceri JC SV Talk, Tuning & Tweaking 15 20-01-09 02:04 PM
Brake Fluid & Oil krhall Bikes - Talk & Issues 6 20-12-06 12:58 AM
Brake fluid Trix SV Talk, Tuning & Tweaking 14 20-01-05 11:13 AM


All times are GMT. The time now is 07:47 AM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.