SV650.org - SV650 & Gladius 650 Forum



Soho Massive For the London based SV owners

Reply
 
Thread Tools
Old 15-06-09, 08:39 PM   #1
dafne
Guest
 
Posts: n/a
Default Anyone good with fibreglass?

As above.

I've removed the undertray off my bike to repair it, but its a little bit worse that I thought

Its one of the Suzuki OEM TCP ones, which are like hens teeth these days.

Is anyone here good with fibreglass and able to look at repairing it for me (i.e. fixing the cracks, remaking broken fittings etc). If not, can anybody suggest someone in London that would be able to do it?

Ta!
  Reply With Quote
Old 15-06-09, 09:47 PM   #2
Airwolf
Member
 
Airwolf's Avatar
 
Join Date: Jun 2008
Location: Merton, London SW19
Posts: 242
Default Re: Anyone good with fibreglass?

have you got a pic or two of what needs doing and where abouts are you again.

done some repairs, but does depend what needs doing.

will give it a try.

fibreglass can be a pain, to reienforce, may need extra work.

pics will help.
__________________
SV650SY, tinted double bubble, tail tidy, belly pan, hugger, delkevic can (sounds sweet) forgot to add... in the best colour CANDY GRAND BLUE
GPX400R with gpz600 block. getting some work done by myself to get it back on the road.
Airwolf is offline   Reply With Quote
Old 15-06-09, 10:02 PM   #3
squirrel_hunter
Member
Mega Poster
 
squirrel_hunter's Avatar
 
Join Date: Apr 2005
Location: Sunny Swindon
Posts: 3,578
Default Re: Anyone good with fibreglass?

I'm no expert, in fact I'm yet to dabble, but I have read up on the subject.

From what I understand the OEM stuff is ABS plastic and repair with fiber glass is not recommended. Not that it won't work or anything just that it won't be as strong. Best recommendation is plastex or liquid plastic.

I could however be wrong, just my understanding.
__________________
"A little enthusiastic?"

May I add here, GG is awesome and I think I am in love with Stretchie...he rocks my world!

SH2 | 2MA | GROM | YSR
squirrel_hunter is offline   Reply With Quote
Old 15-06-09, 10:06 PM   #4
dafne
Guest
 
Posts: n/a
Default Re: Anyone good with fibreglass?

I haven't got pics at the moment, so i'll get some tomorrow. I'm based in Lambeth, but i've only got very basic tools with me (i.e. no power tools)

There are quite a few cracks which look like they've been bodged with a glue gun or silicon sealant type stuff at some point and three of the tabs have broken off completely (although, I still have two of them). I've started stripping the glue off so I can see the extent of the damage. I'm going to have an attempt to fix it on the weekend, but i'll have to borrow a drill or get my mum to send down some of my tools from home.
  Reply With Quote
Old 15-06-09, 10:09 PM   #5
dafne
Guest
 
Posts: n/a
Default Re: Anyone good with fibreglass?

Hmmm, glad you said that. Checked the manufacturers website, which seems to confirm it! On that note, how would I go about repairing it?
  Reply With Quote
Old 15-06-09, 11:08 PM   #6
squirrel_hunter
Member
Mega Poster
 
squirrel_hunter's Avatar
 
Join Date: Apr 2005
Location: Sunny Swindon
Posts: 3,578
Default Re: Anyone good with fibreglass?

I think Plastex is what you're after then.
__________________
"A little enthusiastic?"

May I add here, GG is awesome and I think I am in love with Stretchie...he rocks my world!

SH2 | 2MA | GROM | YSR
squirrel_hunter is offline   Reply With Quote
Old 16-06-09, 07:16 PM   #7
Airwolf
Member
 
Airwolf's Avatar
 
Join Date: Jun 2008
Location: Merton, London SW19
Posts: 242
Default Re: Anyone good with fibreglass?

i,m only at south wimbledon.
i have most things, drill, sander etc.
just let me know...
__________________
SV650SY, tinted double bubble, tail tidy, belly pan, hugger, delkevic can (sounds sweet) forgot to add... in the best colour CANDY GRAND BLUE
GPX400R with gpz600 block. getting some work done by myself to get it back on the road.
Airwolf is offline   Reply With Quote
Old 19-06-09, 03:06 AM   #8
rictus01
Member
Mega Poster
 
rictus01's Avatar
 
Join Date: Jul 2003
Location: South London
Posts: 9,799
Default Re: Anyone good with fibreglass?

you probably get away with a bit of plastic welding, if you can find a busted bit of fairing it can be welded on behind to suppose the repair.

Cheers Mark.
__________________
Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, and loudly proclaiming, 'Wow! What a Ride!
rictus01 is offline   Reply With Quote
Old 20-06-09, 05:17 PM   #9
dafne
Guest
 
Posts: n/a
Default Re: Anyone good with fibreglass?

I bought some of that Plastex stuff in the end.

Basically. Its awesome! Undertray is pretty much fixed now. I've had to order a little dremel style tool just so I can do one or two of the cracks that haven't fully broken yet, but absolutely brilliant so far.

Thanks Squirrel

Just need to find somewhere to prep and paint it now, and it can go back on.
  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
fibreglass bits on ebay - any good? stuballs SV Talk, Tuning & Tweaking 9 31-12-08 01:57 AM
Fibreglass can packing yorkie_chris Stuff Wanted 2 24-05-08 07:42 PM
full fibreglass jacket r4ce_e3nd SV Talk, Tuning & Tweaking 18 06-05-06 09:54 AM
is there a good mechanic,by good i mean cheap wigan650s The Madlanders 3 01-09-05 08:53 PM
Good bike, sit, stay......roll over , theres a good girl! 454697819 SV Talk, Tuning & Tweaking 13 16-08-04 09:35 PM


All times are GMT. The time now is 03:33 PM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.