Fairing bracket

Atleast thats what i think its called! Its the banana shaped bracket that goes from the frame of a K5 to the lower fairings. If you've fitted some and R and G bungs you may have this lying around doing nothing so if you can sell it to me id be VERY grateful!

like this one.

Thats the badger!

I might have some of these lying around in my shed from my old k3, do you think this is the same component as is fitted to the k5 ?

Do you need the bracket from both sides ?

Hi,

I am also looking for some of these Banana shaped brackets for a K4 (04 plate), If anyone has a couple of spares Please let me know

Im trying to find out where i can get a replacement lower fairing bracket for my K2 650s, the bracket is the one that connects each side of the lower fairing, it also attaches to the bottom left of the radiator (as you face the front of the bike). Its gone very rusty and looks quite unsightly! i have had a little look around the net but couldn't find the exact part... any help?

[Nobbylad]

I have a pair of the banana shaped brackets from a K8 (will fit K4+ I believe).

With regards to the bracket that alibax is after, is it the 'U' shaped bracket you need? If so, can't you make one out of some aluminum strip (get it from B&Q for around £1)?

I haven't had a proper look at it (only got the bike on Friday) looks like its a strait rod that goes from side to side with a fixing point on each end and another fixing point 2/3rds along on the left attached to the radiator. If i can make something to fit then i'll do that. Also i was thinking of making a radiator grille out of some aluminium or stainless mesh from DIY store. Should only be a few quid, if it look naf i'll take it back off!