SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 12-07-05, 10:30 PM   #1
tinceysv650
Guest
 
Posts: n/a
Default after the run in process..

i have just run in my 2005 sv 650 at the 600 mile first service, and i am proud to say i just did it in 5 days.....

i recently dyno'd my bike yesterday and it is putting out a quite amazing 79bhp standard.

as i was told by a freind its supposed to be around the 70 bhp mark, is this correct..?

if so well done me, what do you guys(n gals) think??

manny thanks, tom
  Reply With Quote
Old 12-07-05, 10:46 PM   #2
Anonymous
Guest
 
Posts: n/a
Default

Sounds like a fault as that would work out at about 83-84 at the crankshaft which I don't think is achievable unless you're reboring/stroking the motor???
  Reply With Quote
Old 12-07-05, 10:49 PM   #3
Carsick
Guest
 
Posts: n/a
Default

There's alot of variation between dynanometers, so it's possible that with a high reading meter and a good engine you could show 79 with no mods. I'm not sure what corrections they do on the figure, though.
  Reply With Quote
Old 12-07-05, 11:13 PM   #4
BURNER
Guest
 
Posts: n/a
Default

Some shops have quite optimistic dynos, impresses the customers.
  Reply With Quote
Old 13-07-05, 06:05 AM   #5
TC3
Guest
 
Posts: n/a
Default

I just passed the 500 mile mark and that is the run in period if you look in the book and then you can go to 7500rpm until 1000 miles
  Reply With Quote
Old 13-07-05, 08:37 AM   #6
timwilky
Member
Mega Poster
 
timwilky's Avatar
 
Join Date: Mar 2004
Location: Not in Yorkshire. (Thank God)
Posts: 4,116
Default Re: after the run in process..

Quote:
Originally Posted by tinceysv650
i have just run in my 2005 sv 650 at the 600 mile first service, and i am proud to say i just did it in 5 days.....

i recently dyno'd my bike yesterday and it is putting out a quite amazing 79bhp standard.

as i was told by a freind its supposed to be around the 70 bhp mark, is this correct..?

if so well done me, what do you guys(n gals) think??

manny thanks, tom
5 days to do 600 miles. you wimp. quite achievable over a weekend.
__________________
Not Grumpy, opinionated.
timwilky is offline   Reply With Quote
Old 13-07-05, 08:39 AM   #7
diamond
Guest
 
Posts: n/a
Default Re: after the run in process..

Quote:
Originally Posted by timwilky
Quote:
Originally Posted by tinceysv650
i have just run in my 2005 sv 650 at the 600 mile first service, and i am proud to say i just did it in 5 days.....

i recently dyno'd my bike yesterday and it is putting out a quite amazing 79bhp standard.

as i was told by a freind its supposed to be around the 70 bhp mark, is this correct..?

if so well done me, what do you guys(n gals) think??

manny thanks, tom
5 days to do 600 miles. you wimp. quite achievable over a weekend.
Here, here. 2 days for me
  Reply With Quote
Old 13-07-05, 10:12 AM   #8
graphikill
Guest
 
Posts: n/a
Default

jesus guys... i new i should have took a week off....

i got mine last weekend and i still only have 170 miles on it......
  Reply With Quote
Old 13-07-05, 10:19 AM   #9
diamond
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by graphikill
jesus guys... i new i should have took a week off....

i got mine last weekend and i still only have 170 miles on it......
What !!!!!

I've had mine 3 weeks and am a few miles short of 2000
  Reply With Quote
Old 13-07-05, 10:24 AM   #10
graphikill
Guest
 
Posts: n/a
Default

i am at work........

the things sat out side from 8:30- til 5:30

i went for a blast last night and put 100 miles on it. as i was getting ****ed at the tyres not being rubbed in!

i am out on sunday with her..going to kirby longsdale (a mates just picking up his gsxr 1000 on friday so he want to play out) so that will get a few miles on it.....

but i tell yo what its hard keeping the revs low..... dont you just wanna blast it....

what will happen if the reves arent adheared to .... and what is teh reason for the running in period...

i know a mechanic on a race team and tehy put brand new engines in teh bikes and teh riders just go give em hell....

even he things taht the engines can take it..........al be it they have to last longer thenb a race engine
  Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
A process for processes Baph Idle Banter 7 24-03-09 12:37 PM
What process do you go through before making a thread Frank Idle Banter 12 20-09-08 03:59 PM
De-restriction process plowsie Bikes - Talk & Issues 60 22-12-07 12:46 AM
Process rictus01 2007 Annual Rideout 0 18-07-06 07:25 PM
pics of sv650 in process of fightering sv650nutter149 SV Talk, Tuning & Tweaking 6 06-03-06 12:08 AM


All times are GMT. The time now is 04:23 AM.


Powered by vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.