Will K3 Plastics fit a K4? - SV650.org

Luckypants · 20-01-09, 12:56 PM

I read on here that the K3 has a different sub-frame to all other pointies. Does this mean that the rear plastics are unique to that model?

Basically will second hand plastics from K3 fit on a K4 sub-frame?

20-01-09, 01:00 PM

As far as I am aware it was only the angle of the subframe which caused the main differences between the models, this then required the under rider seat section to be modified slightly and hence why the K3 seat will not fit later models.

Wait for confirmation but I think the plastics fit.

Stu · 20-01-09, 01:03 PM

I think it would fit, just the side access panels are definitely different

Don't accept this as conformation tho'

20-01-09, 01:16 PM

plastics are the same.

20-01-09, 10:59 PM

K3 Plastic Reference R/H Side Tail Panel 45501-17G01-YC2
K4 Plastic Reference R/H Side Tail Panel 45501-17G11-YEX
K5 Plastic Reference R/H Side Tail Panel 45501-17G21-YC2
K6 Plastic Reference R/H Side Tail Panel 45501-17G11-YHH
K7 Plastic Reference R/H Side Tail Panel 45501-16G21-YAY

First number is the same , last numbers are obviously paint codes , what worried me is the middle code ?
Don`t bother clicking on them as they are prices in Dollars , just wanted to grab the numbers from their Microfiche . I have a K3 Luckypants .

20-01-09, 12:56 PM	#1
Luckypants Moderator Mega Poster Join Date: Jul 2003 Location: Nr Ruthin Posts: 7,079	Will K3 Plastics fit a K4? I read on here that the K3 has a different sub-frame to all other pointies. Does this mean that the rear plastics are unique to that model? Basically will second hand plastics from K3 fit on a K4 sub-frame? __________________ "Your Viffer sounds like it is raising hell! Spot on." - Witchery 17/4/08 Snow Plough Appreciation Society - Member #3

20-01-09, 01:00 PM	#2
Dangerous Dave Guest Posts: n/a	Re: Will K3 Plastics fit a K4? As far as I am aware it was only the angle of the subframe which caused the main differences between the models, this then required the under rider seat section to be modified slightly and hence why the K3 seat will not fit later models. Wait for confirmation but I think the plastics fit.

20-01-09, 01:03 PM	#3
Stu Trinity Mega Poster Join Date: Jun 2006 Location: Guildford Posts: 8,027	Re: Will K3 Plastics fit a K4? I think it would fit, just the side access panels are definitely different Don't accept this as conformation tho'

20-01-09, 01:16 PM	#4
kwak zzr Guest Posts: n/a	Re: Will K3 Plastics fit a K4? plastics are the same.

20-01-09, 10:59 PM	#5
xXBADGERXx Guest Posts: n/a	Re: Will K3 Plastics fit a K4? K3 Plastic Reference R/H Side Tail Panel 45501-17G01-YC2 K4 Plastic Reference R/H Side Tail Panel 45501-17G11-YEX K5 Plastic Reference R/H Side Tail Panel 45501-17G21-YC2 K6 Plastic Reference R/H Side Tail Panel 45501-17G11-YHH K7 Plastic Reference R/H Side Tail Panel 45501-16G21-YAY First number is the same , last numbers are obviously paint codes , what worried me is the middle code ? Don`t bother clicking on them as they are prices in Dollars , just wanted to grab the numbers from their Microfiche . I have a K3 Luckypants .

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
plastics	rictus01	Bikes - Talk & Issues	7	09-02-09 04:16 AM
clock plastics	noob-saibot	SV Talk, Tuning & Tweaking	17	21-10-08 02:21 PM
Removing all plastics	DarrenSV650S	SV Talk, Tuning & Tweaking	3	03-12-07 08:08 PM
Full set of plastics!!	Chris	Stuff Wanted	6	16-08-07 04:49 PM
Bodywork and Plastics.	SoulKiss	Bikes - Talk & Issues	3	20-02-07 05:49 PM