Daft exhaust question - SV650.org

Nobbylad · 18-03-09, 09:54 PM

Will an end can of say a curvy, fit a point assuming you have the right diameter link pipe?

i.e. if I have a CCC can + link pipe on my pointy and I want to swap the end can, would an end can off a curvy fit assuming the inlet pipe diameter is the same on both end cans?

Apologies if the answer is obvious!

18-03-09, 10:01 PM

if my dad can get a curvy can to fit a fzr1000 im pritty sure you can fit it to a pointy the budget cans arnt bike specific anyway that i know of.

18-03-09, 10:06 PM

ive got the end can off my old curvy fitted to my pointy

18-03-09, 10:26 PM

With the correct link pipe you could fit the Klaxon tube from a cruise ship to any bike ......................... HWAAAAAAAAAAR

18-03-09, 10:45 PM

High level Link pipes..

Where do i pick these bad boys up?
Made a thread about it a while ago, didnt turn up many answers..

18-03-09, 10:46 PM

banditmania do them i think.

18-03-09, 10:47 PM

Quote:

Originally Posted by saoralba

High level Link pipes..

Where do i pick these bad boys up?
Made a thread about it a while ago, didnt turn up many answers..

Ebay, someone wants 60 odd quid ha!

18-03-09, 10:48 PM

Zsv, if you have a link, that would be nice

Cant find any

18-03-09, 10:49 PM

I am retarded, i didnt know there was a 2nd page..

That it?
http://www.banditmaniashop.co.uk/sv6...work-814-p.asp

18-03-09, 10:49 PM

*sorry for the hyjack nobbyland*

18-03-09, 09:54 PM	#1
Nobbylad Member Mega Poster Join Date: Jun 2008 Location: West Lancs Posts: 4,055	Daft exhaust question Will an end can of say a curvy, fit a point assuming you have the right diameter link pipe? i.e. if I have a CCC can + link pipe on my pointy and I want to swap the end can, would an end can off a curvy fit assuming the inlet pipe diameter is the same on both end cans? Apologies if the answer is obvious!

18-03-09, 10:01 PM	#2
zsv650 Guest Posts: n/a	Re: Daft exhaust question if my dad can get a curvy can to fit a fzr1000 im pritty sure you can fit it to a pointy the budget cans arnt bike specific anyway that i know of.

18-03-09, 10:06 PM	#3
speedplay Guest Posts: n/a	Re: Daft exhaust question ive got the end can off my old curvy fitted to my pointy Last edited by speedplay; 19-03-09 at 10:29 AM.

18-03-09, 10:26 PM	#4
xXBADGERXx Guest Posts: n/a	Re: Daft exhaust question With the correct link pipe you could fit the Klaxon tube from a cruise ship to any bike ......................... HWAAAAAAAAAAR

18-03-09, 10:45 PM	#5
Sally Guest Posts: n/a	Re: Daft exhaust question High level Link pipes.. Where do i pick these bad boys up? Made a thread about it a while ago, didnt turn up many answers..

18-03-09, 10:46 PM	#6
zsv650 Guest Posts: n/a	Re: Daft exhaust question banditmania do them i think.

18-03-09, 10:48 PM	#8
Sally Guest Posts: n/a	Re: Daft exhaust question Zsv, if you have a link, that would be nice Cant find any

18-03-09, 10:49 PM	#9
Sally Guest Posts: n/a	Re: Daft exhaust question I am retarded, i didnt know there was a 2nd page.. That it? http://www.banditmaniashop.co.uk/sv6...work-814-p.asp

18-03-09, 10:49 PM	#10
Sally Guest Posts: n/a	Re: Daft exhaust question sorry for the hyjack nobbyland

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Daft PC question	DanDare	Idle Banter	30	23-11-07 04:02 PM
Daft question?!	speedygirl	SV Talk, Tuning & Tweaking	4	19-01-06 10:47 PM
Daft question (again)	shutdown	SV Talk, Tuning & Tweaking	9	15-04-05 11:24 AM
Might seem a daft question...	Cloggsy	SV Talk, Tuning & Tweaking	23	13-01-05 12:45 PM
Daft headlight question	Mags	SV Talk, Tuning & Tweaking	10	17-09-04 10:53 PM