Which main jets from this site?

Anyone know?

http://www.allensperformance.co.uk/mikjets.html

Cheers

for the curvy in you sig? whats in there at the moment? standard 137.5 mikuni's?

Originally Posted by Dappa D

for the curvy in you sig? whats in there at the moment? standard 137.5 mikuni's?

It wouldn't be for a pointy

Yes standard 137.5 Mikuni's.

lol yea yea yea! might have been for a different bike shmart ****!!!

seriously tho i dont know....just pretending like I do!,

when i bought main jets to accommadate some bits and pieces on the bike i got from here http://stores.ebay.co.uk/Janets-Bike...QQftidZ2QQtZkm

very cheap, next day delivery and anything not listed she can get within a couple of days.....sorry dude dont know looking at that allens site

No worries. Sorry for being a smart-****! Might have a proper look at that ebay site later. The jets in that link fit the SV? What bits and pieces did you have and what jets did you use?

ive not got them any more but i had a bmc race rs filter so needed to jet to suit that, didnt get it dynod and set up exactly right but i went with 155 mikunis and they were close enough for me!

also raised the tank by 10mm using some door stops and pulled out the sound deadening foam from under the tank.

the jets in the link are same make as standard ones in the sv, why are you rejetting out of interest? doing any engine/exhaust work?

I am considering fitting a BMC Race filter (not RS). Have an end can. Was thinking of going to 142.5 or 145. Just considering it at this stage.

i see i see....i bought a few different sizes from that ebay shop so could try different ones and see what was best (turns out the first ones i put in i was happy with) as they are cheap enough....

ill put my guess in....142.5!

The great thing about twins (as opposed to 4 pots) is that jets are cheaper cos you need half as many!

[yorkie_chris]

N102221-xxx as far as I remember. Best to pull a jet out and have a measure though, I'm not at home so can't check on my spare ones sorry.