Identifying front end? - SV650.org

29-08-09, 05:10 PM

Hi all-

My right disc is loose and my pads are starting to need replacing (finally) so I think it's time to get new bits. Discs are about 5mm or less which is pretty much at replaceable level. However, I don't know if my front end is a K3 or K4 GSXR 750 front end and I know they differ in the discs by 10mm.

Are there any obvious features I can use to tell the difference? I went to go measure the discs but they were obviously bigger than 320mm which was very confusing

Thanks!

29-08-09, 05:12 PM

Front end is the one with the white lights on it, if they are red you are at the wrong end.

Sorry couldn't resist. and can't really help I'm afraid

29-08-09, 05:46 PM

I found an identifying feature- the fact that AndyB, who's bike it was originally, told me they were K3 forks in a post about suspension about a year ago. This forum is made of win.

yorkie_chris · 29-08-09, 09:28 PM

K3 uses 320mm same as SRAD AFAIK

29-08-09, 05:10 PM	#1
chakraist Guest Posts: n/a	Identifying front end? Hi all- My right disc is loose and my pads are starting to need replacing (finally) so I think it's time to get new bits. Discs are about 5mm or less which is pretty much at replaceable level. However, I don't know if my front end is a K3 or K4 GSXR 750 front end and I know they differ in the discs by 10mm. Are there any obvious features I can use to tell the difference? I went to go measure the discs but they were obviously bigger than 320mm which was very confusing Thanks!

29-08-09, 05:12 PM	#2
Brettus Guest Posts: n/a	Re: Identifying front end? Front end is the one with the white lights on it, if they are red you are at the wrong end. Sorry couldn't resist. and can't really help I'm afraid

29-08-09, 05:46 PM	#3
chakraist Guest Posts: n/a	Re: Identifying front end? I found an identifying feature- the fact that AndyB, who's bike it was originally, told me they were K3 forks in a post about suspension about a year ago. This forum is made of win.

29-08-09, 09:28 PM	#4
yorkie_chris Noisy Git Mega Poster Join Date: Apr 2007 Location: Halifax/Leeds Posts: 26,645	Re: Identifying front end? K3 uses 320mm same as SRAD AFAIK __________________ Currently Ex Biker Now rebuilding a 63' fishing trawler as a dive boat

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help Identifying Part	gavinsky23	SV Talk, Tuning & Tweaking	9	08-06-09 06:35 PM
Help Identifying a GSXR	yorkie_chris	Bikes - Talk & Issues	70	21-04-09 09:35 AM
Help identifying link pipe please	svrich	SV Talk, Tuning & Tweaking	6	31-03-09 07:59 PM
Help identifying tune on guitar	missyburd	Idle Banter	41	15-01-09 11:03 PM
Identifying This Front Paddock Stand	GeeMac	Bikes - Talk & Issues	8	20-08-07 11:28 AM