rear brake banjo size - SV650.org

12-12-09, 11:13 PM

hi whats the rear brake banjo size for the master cylinder (sv650 k3)

cheers

DarrenSV650S · 12-12-09, 11:15 PM

You mean the thread pitch of the bolt? It can differ from bike to bike apparently

12-12-09, 11:16 PM

the whole size i have heard its m10x1.25 but not sure

DarrenSV650S · 12-12-09, 11:23 PM

Yeh it will be M10. But it's not always 1.25 pitch

Can you not measure your bolt to check?

12-12-09, 11:30 PM

^ hmm erm not realy as i have to travel 10miles to get the brakes bled as i dont have a clue how to do it, well i do i just dont want to :/

DarrenSV650S · 12-12-09, 11:36 PM

Well it will either be 1.00mm or 1.25mm pitch

Is it for a brake light switch?

12-12-09, 11:56 PM

yeh it is, but doesn't relay matter as i have ordered one now lol, I'm impatient

but i looked on tasty nuts, and a few other random sources and they all sead it was 1.25 so i will just have to hope that its the right size.

and i read a thread or two that say they have had 1.00 or 1.25 so i suppose time will tell

DarrenSV650S · 13-12-09, 12:09 AM

What make of switch did you go for? Are you fitting one to the front brake too?

13-12-09, 12:12 AM

no I'm just fitting it to the back and its a goodridge switch

i have just ordered some GB moto rear sets for £160 so needed a switch as well

12-12-09, 11:13 PM	#1
barwel1992 Guest Posts: n/a	rear brake banjo size hi whats the rear brake banjo size for the master cylinder (sv650 k3) cheers

12-12-09, 11:15 PM	#2
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,413	Re: rear brake banjo size You mean the thread pitch of the bolt? It can differ from bike to bike apparently

12-12-09, 11:16 PM	#3
barwel1992 Guest Posts: n/a	Re: rear brake banjo size the whole size i have heard its m10x1.25 but not sure

12-12-09, 11:23 PM	#4
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,413	Re: rear brake banjo size Yeh it will be M10. But it's not always 1.25 pitch Can you not measure your bolt to check?

12-12-09, 11:30 PM	#5
barwel1992 Guest Posts: n/a	Re: rear brake banjo size ^ hmm erm not realy as i have to travel 10miles to get the brakes bled as i dont have a clue how to do it, well i do i just dont want to :/

12-12-09, 11:36 PM	#6
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,413	Re: rear brake banjo size Well it will either be 1.00mm or 1.25mm pitch Is it for a brake light switch?

12-12-09, 11:56 PM	#7
barwel1992 Guest Posts: n/a	Re: rear brake banjo size yeh it is, but doesn't relay matter as i have ordered one now lol, I'm impatient but i looked on tasty nuts, and a few other random sources and they all sead it was 1.25 so i will just have to hope that its the right size. and i read a thread or two that say they have had 1.00 or 1.25 so i suppose time will tell

13-12-09, 12:09 AM	#8
DarrenSV650S Member Mega Poster Join Date: Jul 2006 Location: Dundee Posts: 4,413	Re: rear brake banjo size What make of switch did you go for? Are you fitting one to the front brake too?

13-12-09, 12:12 AM	#9
barwel1992 Guest Posts: n/a	Re: rear brake banjo size no I'm just fitting it to the back and its a goodridge switch i have just ordered some GB moto rear sets for £160 so needed a switch as well

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Banjo Bolt Size	Sideshow#36	SV Talk, Tuning & Tweaking	2	06-07-09 10:31 AM
curvy master cylinder banjo bolt thread size?	stuballs	SV Talk, Tuning & Tweaking	1	01-03-09 05:18 PM
Rear M/C Banjo size, 1.0 or 1.25	Ter	SV Talk, Tuning & Tweaking	5	08-11-06 12:34 AM
Anyone know the '99 rear master cylinder brake thread size?	Ter	SV Talk, Tuning & Tweaking	2	19-10-06 05:13 PM
What size is the banjo for the rear master cylinder?	northwind	SV Talk, Tuning & Tweaking	11	27-04-06 11:08 PM