SV650 Brand New Emulators in UK

Hi all,

I have a few sets of the Debrix emulators for the SV650 available for sale. Id rather not have to put them on ebay so thought I would see if anyone here wanted a set. I assume you know what they are and that they drop into the Carbies but need a spacer for the pointies. Good step by step guide here on how to fit them. They are good quality and do make a difference to the front damping.

I am looking for £36 per set plus £1.5 postage. They are in the UK and I can usually ship on the same day as receiving cleared funds. If anyone is interested then PM me otherwise they will end up on ebay.

Thanks

Bump.

Sent from my GT-I9300 using Tapatalk 2

Can you get some spacers?

Originally Posted by Runako

Can you get some spacers?

Im afraid I can't. I don't have access to a Lathe. You may be able to speak to a friendly Orger who has been able to make up the spacers and see if they will knock up a couple. I know Urbanfireblade made some up and has the measurements required and I think Yorkie_Chris may have been offering them too.

Its one thing I wish I could do but unfortunately I can't. Sorry.

If you sort out spacers and want a set of emulators then let me know although I have a sold a few already.

[maviczap]

Originally Posted by Runako

Can you get some spacers?

Originally Posted by martynp69

Im afraid I can't. I don't have access to a Lathe. You may be able to speak to a friendly Orger who has been able to make up the spacers and see if they will knock up a couple. I know Urbanfireblade made some up and has the measurements required and I think Yorkie_Chris may have been offering them too.

Its one thing I wish I could do but unfortunately I can't. Sorry.

If you sort out spacers and want a set of emulators then let me know although I have a sold a few already.

One of the other Orgers just cut down some pipe to make his spacers, wasn't difficult. You could probably do it with a hacksaw.

There was a whole thread about how he fitted his emulators, see if you can find it using the search tool

If not a local engineering shop could easily knock them out to your spec

Yes thanks both. Already have a pair but struggling to find an engineer here (Cardiff) to do the spacers I have the specs from Urbanfireblade's "how to" thread. I know Chris supplies but I was hoping to get em done locally. As we're coming up to winter now (where was the summer?) I'm keen to do this before next year so if anyone actually knows and engineer comp that can knock up a pair please feel free to recommend away. Or YC it is.

[yorkie_chris]

It also helps to drill out comp holes and weld up rebound hole.

I do them on exchange... I send pre-modded and spacer'd damper rods... you send your stock ones back to me after you done swap.

Yes, I remembered that. Its looking more likely that I'll be using your services Mr YC.

Hi, I am really interested in the emulators. What is the best way 2 contact you? Many thanks manny

Originally Posted by yorkie_chris

It also helps to drill out comp holes and weld up rebound hole.

I do them on exchange... I send pre-modded and spacer'd damper rods... you send your stock ones back to me after you done swap.

And how much is that service chris?