SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
I haven't had a good look at my airbox yet, but was under the impression that the curvy didn't have a snorkel. I have come across some threads where people mention desnorkeling pre 2003 SV's. Can this mod be done, and if so would someone be able to point me in the direction of some instructions?
![]() Last edited by Pricey12; 03-04-13 at 12:56 PM. |
![]() |
![]() |
#2 |
Member
Mega Poster
Join Date: Aug 2003
Location: Croydonia
Posts: 5,376
|
![]()
There is no snorkel, so you can't remove it.
__________________
Modern motorcycles are bloody brilliant, enjoy it while we can ![]() |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]()
That's what I thought. Ta.
|
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
![]()
when people mention desnorkaling 1st gen sv, they usually refer to cutting open the top of the
air filter (or adding extra holes) to make it similar to some aftermarket "race" filters. do an image search and you're bound to find examples. |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
![]()
Had a look on google images and can't find anything. SVRider talks a lot about desnorkeled curvy's so there is obviously some way to 'desnorkel' it. Must just be modifying the top of the airbox as you say.
|
![]() |
![]() |
#7 |
Guest
Posts: n/a
|
![]()
Thanks again Jambo. So it's basically cutting/enlarging hole in the top of the air filter. Wish they'd stop referring to it as desnorkeling
![]() |
![]() |
![]() |
#8 |
Member
Mega Poster
Join Date: Aug 2003
Location: Croydonia
Posts: 5,376
|
![]()
Me too...
Be aware when you do that you change (by a fair margin) the characteristics of the airflow into the air box (that's the point of course). I'd be surprised if it ran correctly without some re-jetting. Jambo
__________________
Modern motorcycles are bloody brilliant, enjoy it while we can ![]() |
![]() |
![]() |
![]() |
#9 |
Noisy Git
Mega Poster
Join Date: Apr 2007
Location: Halifax/Leeds
Posts: 26,645
|
![]()
If it did, it means it was broken before.
__________________
Currently Ex Biker
Now rebuilding a 63' fishing trawler as a dive boat |
![]() |
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
Looks like I will have to look at re-jetting at some point then as want to improve air flow with better filter setup, tank risers, etc. I have a feeling the bike was maybe running a bit rich with the Viper end can fitted as could smell it a bit sometimes. Not exactly scientific, but a bit of an indication perhaps. Would also pop a fair bit on the roll off. Have Delkavic stubby fitted now and no rich smell at all so may have leaned things out a bit.
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Speedo from a curvy S fit into a curvy Naked housing? | Taipan | SV Talk, Tuning & Tweaking | 6 | 18-02-10 04:59 PM |
Naked Curvy Bottom yoke and Curvy speedo drive | 21QUEST | Stuff Wanted | 6 | 29-01-09 09:36 AM |
thought i best post some here, curvy lowers on my curvy | BIKER-DENE | Photos | 3 | 06-05-06 07:26 AM |