Speedo option for those wanting to fit USD forks. - SV650.org

01-03-05, 09:42 AM

Saw this on Banditmania. Another possible option so you can have a speedo again if you fit USD forks.

http://www.banditmania.co.uk/Site_Map.htm

01-03-05, 09:48 AM

Darn.. only goes up to 187mph... just out of what I was looking for..

TSM · 01-03-05, 10:12 AM

Cant see how this will fix your problem, as aparently you just cant get the spedo drive onto the new forks shaft.

Just connect the speedo to the rear wheel, apprently someone here has done that.

PS. The unit looks intresting.

01-03-05, 10:21 AM

I have a multifunction digital speedo/clock, etc. on my AJS. £5 in Halfords

northwind · 01-03-05, 03:08 PM

The rear wheel speedo drive only works with carbed SVs though TSM... Injected ones need to mount it up on the front sprocket shaft and get a speedohealer or similiar, trickier and needs modification to the frame apparently, plus it needs regular cleaning.

It sounds like this one uses a magnetic pickup which would be fine with the USD forks, or on the rear wheel, just like a Veypor or most bicycle clocks.

01-03-05, 09:42 AM	#1
Scoobs Guest Posts: n/a	Speedo option for those wanting to fit USD forks. Saw this on Banditmania. Another possible option so you can have a speedo again if you fit USD forks. http://www.banditmania.co.uk/Site_Map.htm

01-03-05, 10:12 AM	#3
TSM The Sick Man Mega Poster Join Date: Nov 2004 Location: Peckham.SE.LDN Posts: 4,768	Cant see how this will fix your problem, as aparently you just cant get the spedo drive onto the new forks shaft. Just connect the speedo to the rear wheel, apprently someone here has done that. PS. The unit looks intresting. __________________ OTR: KTM 690 Duke R 2015 Full Akro SIDELINE: Kwak ZX636 A1P 2002, Red, R&G's, Yoshi, Double Bubble Screen GONE: Kwak ZX-7R P1, Full Akro, Undertray, Screen GONE: SV650S K2 Very Bruised & Without Fairing, Motovation Frame Sliders, R&G Ally Sprocket Toe Protector, HEL 2 Line Setup, GSXR K1 600 RWU Forks, Barnett Clutch & Springs, Penske 8981 Shock, Gilles Ti Rearsets, Steel Barends, Scottoiler, AFAM Chain & Sprockets, Twin FIAMM Horns, Skidmarx Bellypan, Full Micron Zeta Steel System, Cut down undertay. Forum Problems & Information / Site Suggestions

01-03-05, 03:08 PM	#5
northwind Moderator Mega Poster Join Date: Jan 2004 Location: In the garage where I belong Posts: 17,083	The rear wheel speedo drive only works with carbed SVs though TSM... Injected ones need to mount it up on the front sprocket shaft and get a speedohealer or similiar, trickier and needs modification to the frame apparently, plus it needs regular cleaning. It sounds like this one uses a magnetic pickup which would be fine with the USD forks, or on the rear wheel, just like a Veypor or most bicycle clocks. __________________ "We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another helmet cam option.	northwind	Bikes - Talk & Issues	9	26-10-08 11:06 PM
Is a cut exhaust the best option?	webgeeze	SV Talk, Tuning & Tweaking	29	15-06-07 08:52 PM
For those wanting to do the nurburgring	cuffy	Idle Banter	12	28-04-07 09:26 AM
Am I a wrongun for wanting one of these?	inevitable	Bikes - Talk & Issues	42	15-02-07 09:55 AM
For all those wanting 700cc	454697819	SV Talk, Tuning & Tweaking	34	24-09-04 06:10 PM

01-03-05, 09:48 AM	#2
Grinch Guest Posts: n/a	Darn.. only goes up to 187mph... just out of what I was looking for..

01-03-05, 10:21 AM	#4
chazzyb Guest Posts: n/a	I have a multifunction digital speedo/clock, etc. on my AJS. £5 in Halfords