std indicator clips+LED question - SV650.org

M.C. · 06-07-05, 04:40 PM

does anybody know if you can get them to save cutting the wires?
now the LED question how hot do the resistors get and where is the best place to mount them on a K5?
thanks
Mark

Spiderman · 06-07-05, 08:36 PM

dont understand the first question tbh

I've kept my led indicators at the speed that they are. IMO the faster rate with the brighter flash really catches the attention.

Passed my MOT no problem last week to. I did ask in advance and would advise you to do the same at mot time as some places insist they flash like the originals.

M.C. · 06-07-05, 10:01 PM

sorry if it's not clear but what i mean is the plastic clip on the end of the wire from the std indicators that pushes in to the main wiring clip so the indicators can be removed without cutting (like bullet connectors but they are square plastic things)

06-07-05, 10:10 PM

you could use scotchlocks on there.......

no cutting needed, although they are a bodge in some peoples book!

try phoning robinsons foundry (number is always in mcn) - they supply genuine parts (biggest supplier in uk i think) - so should be able to help.

a lot of genuine parts are actually quite cheap - e.g rear light lense for my tlr was only £7!!!

you could also butcher a spare set of indicators and attatch the connectors from those to your led flashers...............loads of cheap tat on ebay including indicators - most suzukis will do as they nearly all use the same connectors.

07-07-05, 06:21 AM

Think this may solve your problem obviously you'll need an ebay account, http://cgi.ebay.co.uk/ws/eBayISAPI.d...964208669&rd=1
Lawrence

M.C. · 07-07-05, 03:18 PM

thanks they are the ones (i think) i'll have to get my mate to order them for me as he has a paypal account
i think it will be worth about £10 to save all the wire cutting etc

06-07-05, 04:40 PM	#1
M.C. Member Join Date: Oct 2003 Location: West Midlands Posts: 281	std indicator clips+LED question does anybody know if you can get them to save cutting the wires? now the LED question how hot do the resistors get and where is the best place to mount them on a K5? thanks Mark

06-07-05, 08:36 PM	#2
Spiderman Where the hell am I? Mega Poster Join Date: Dec 2004 Location: Swingin' thru the urban jungle Posts: 7,451	dont understand the first question tbh I've kept my led indicators at the speed that they are. IMO the faster rate with the brighter flash really catches the attention. Passed my MOT no problem last week to. I did ask in advance and would advise you to do the same at mot time as some places insist they flash like the originals. __________________ . "Computers are great! Not for communicating tho. They have one fundamental flaw ... they don't have eyebrows." AlpineCarStereo: you win ....... eeerrr ..... ummm ..... my undying support of you, the greatest Mod this forum has ever known. My Leige. davepreston: i bow to your modding godliness. vixis: He's this really cute Persian tea-boy, Im so not giving you his number :P

07-07-05, 06:21 AM	#5
lodman27 Guest Posts: n/a	cables Think this may solve your problem obviously you'll need an ebay account, http://cgi.ebay.co.uk/ws/eBayISAPI.d...964208669&rd=1 Lawrence

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Yet another indicator question...	Baph	SV Talk, Tuning & Tweaking	5	23-03-07 12:09 AM
Mini-indicator question (not resistors :P)	Baph	SV Talk, Tuning & Tweaking	22	20-03-07 09:08 PM
looking for racing clips?	oldsvrider	Idle Banter	0	27-06-06 08:29 AM
Another indicator question	Lee Rainbow	SV Talk, Tuning & Tweaking	10	03-06-06 06:29 AM
Indicator wiring question!!	lodman27	SV Talk, Tuning & Tweaking	2	26-03-05 07:13 PM

06-07-05, 10:01 PM	#3
M.C. Member Join Date: Oct 2003 Location: West Midlands Posts: 281	sorry if it's not clear but what i mean is the plastic clip on the end of the wire from the std indicators that pushes in to the main wiring clip so the indicators can be removed without cutting (like bullet connectors but they are square plastic things)

06-07-05, 10:10 PM	#4
tillerthou Guest Posts: n/a	you could use scotchlocks on there....... no cutting needed, although they are a bodge in some peoples book! try phoning robinsons foundry (number is always in mcn) - they supply genuine parts (biggest supplier in uk i think) - so should be able to help. a lot of genuine parts are actually quite cheap - e.g rear light lense for my tlr was only £7!!! you could also butcher a spare set of indicators and attatch the connectors from those to your led flashers...............loads of cheap tat on ebay including indicators - most suzukis will do as they nearly all use the same connectors.

07-07-05, 03:18 PM	#6
M.C. Member Join Date: Oct 2003 Location: West Midlands Posts: 281	thanks they are the ones (i think) i'll have to get my mate to order them for me as he has a paypal account i think it will be worth about £10 to save all the wire cutting etc