Front fairing removal on K3?

Anyone got any tips or instructions on how to remove the front fairing on a K3? Or is it just a case of undoing everything you can find and hope for the best !!!

Thankx

[Richie]

Just done this little drawing describing what to do, Just for you.
remove wing mirrors first then Screen... ( 2,1)


It's a pain, but once you've done it a few times you can remove it in about 10-15 mins

Hope this helps.
Richie

ps. I take NO responsibility if you damage your bike, Please be very gentle and try not to prize anything too hard.

[Richie]

the black plastic bit round the speedo drive will still be on, this is removed by pushing the centre of the retaining clip located at the bottom middle of the speedo head.

when replaceing the fairing, the black plastic is a right royal pain to line up, please take your time...

Thanks Richie, you make it look so easy.

I'll take my time as I know that Suzuki screws and bolts are made from solidified wax !!!

Regards

AJR

Nice one Ritchie, haven't had to do it yet, but as you know ..........PPPPP

[Richie]

PPPPPPP = 7P
Prior planning &Preperation, Prevent's P1$$ poor performance...
Haven't heard that in a bit...

Originally Posted by Richie1743

It's a pain, but once you've done it a few times you can remove it in about 10-15 mins

less than that once you've done it a few times. i can get a full race fairing off and on again in about 20 mins. like they say, easy when you know how

trick

Originally Posted by Richie1743

PPPPPPP = 7P
Prior planning &Preperation, Prevent's P1$$ poor performance...
Haven't heard that in a bit...

Planning always has to be prior and Pi$$ is a just a subjective preposition
...........ooooops did you see that? another P just crept in

ah after much search I finally stumbled across a thread that helps with this...

I'm looking to take off the front cowel, anyone got some helps and tips with pictures?

On a K6