 |
 |
| SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
 |
|
|
Thread Tools |
26-12-05, 01:56 PM
|
#1 |
|
Guest
Posts: n/a
|
scottoiler suction tube thingi
whare do i put it ??? i need to create the vacume but what pipe whare from help!!!
 
|
|
|
26-12-05, 02:14 PM
|
#2 |
|
Guest
Posts: n/a
|
oh its a curvey to !
|
|
|
|
26-12-05, 02:14 PM
|
#3 |
|
Guest
Posts: n/a
|
oh its a curvey to !
|
|
|
|
26-12-05, 05:37 PM
|
#4 |
|
Guest
Posts: n/a
|
lift the tank and look for the pipes on the right hand side of the bike. You will need to cut through the vacuum pipe and insert the T connector that came with the scottoiler kit like so...
|
|
|
|
26-12-05, 05:37 PM
|
#5 |
|
Guest
Posts: n/a
|
I think you might have to cut a tube and use the white 't' piece but i'm not 100% on that as mines a pointy. Go on the scottoiler website or give them a ring, they were very helpful when i needed some assistance.
|
|
|
|
26-12-05, 08:54 PM
|
#6 |
|
Member
Mega Poster
Join Date: Jul 2003
Location: Warwickshire
Posts: 2,802
|
I teed mine into the vac feed that goes to the fuel tap, but the fuel pump feed as per the photo above works fine.
Yes, as said you need to snip the pipe and fit the T-piece which comes with the kit. |
|
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| SV Tube | Lucas | Photos | 61 | 13-08-10 03:22 PM |
| Bar end bolts held in by suction? | MiniMatt | SV Talk, Tuning & Tweaking | 4 | 18-03-08 06:43 PM |
| You Tube? | -Ralph- | Idle Banter | 10 | 25-10-07 04:43 PM |
| You tube | Moo | Idle Banter | 17 | 08-11-06 07:58 PM |
| rear brake arm thingi! | suzsv650 | SV Talk, Tuning & Tweaking | 18 | 16-05-06 06:38 PM |
