SV650.org - SV650 & Gladius 650 Forum



SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000
Need Help: Try Searching before posting

Reply
 
Thread Tools
Old 09-01-07, 08:52 PM   #1
wtdafk
Guest
 
Posts: n/a
Default not working Again!

hi guys n gurls,
my sv broke today for the third time with the third differnt problem! guess they dont like english weather!!

anyway pulling away from my house and before i get the chance to change up to second gear the engine stops and the oil pressure light comes on as i come to a swift stop!

i try the starter and nothing no starter motor or anything, my best guess is that it is the kill switch attached to the side stand has been buggerd up but im not sure does anybody know how i would check this ? im not very mecanical minded but dont rerally fancy having the garage come and pick it up its a curvy 02 650 by the way

cheers
  Reply With Quote
Old 09-01-07, 08:57 PM   #2
Biker Biggles
Member
Mega Poster
 
Biker Biggles's Avatar
 
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,071
Default

I take it there is oil in it?
And petrol?
And you didn't knock the kill switch on the right bar to "off"?
We've all done that.
__________________
On a clear day we stand there and look further than the ordinary eye can see.
Biker Biggles is offline   Reply With Quote
Old 09-01-07, 09:14 PM   #3
wtdafk
Guest
 
Posts: n/a
Default

hahah yeah oil and fuel if no fuel the the starter motor would still make the wereing noise but no nothing its the same symtoms as the kill switch on the bars but im sure its not that i checked many timea because i know how easy it could be done
  Reply With Quote
Old 10-01-07, 08:56 AM   #4
Baph
Guest
 
Posts: n/a
Default

To check the switches that kill the bike, remove the wires from the switch & put the ends together securely. This has the same effect as the switch being closed, and if you do it to all switches, you can start the bike without clutch (not sure I'd want to) and ride with the side stand down (definitely wouldn't want to).

Since you ride a curvy, that's about the limit of my knowledge really. However, when you hit the starter button, does the starter relay click, or the starter turn? If the relay clicks or the motor turns, the bike isn't set to "Kill".
  Reply With Quote
Old 10-01-07, 11:32 AM   #5
wtdafk
Guest
 
Posts: n/a
Default

good morning, no theres not even a click no sighn of life there atall, could you possible tell me where the switches are for the side stand? and do i just pull the cables out, i tend to break things when i try and fix them
  Reply With Quote
Old 10-01-07, 11:34 AM   #6
Baph
Guest
 
Posts: n/a
Default

Quote:
Originally Posted by wtdafk
good morning, no theres not even a click no sighn of life there atall, could you possible tell me where the switches are for the side stand? and do i just pull the cables out, i tend to break things when i try and fix them
Take a look up under the bike (when bending down). The side-stand pushes a button basically, which makes a switch contact.

Whilst you're down there looking, move the side-stand up & down (with someone else holding the bike), you can't miss it.
  Reply With Quote
Old 10-01-07, 11:54 AM   #7
wtdafk
Guest
 
Posts: n/a
Default

hmmm im on my own stuck in my hoese in the middle of nowhere now hoe could i do this im gunna look for something to lean the bike up on
  Reply With Quote
Old 10-01-07, 11:57 AM   #8
Biker Biggles
Member
Mega Poster
 
Biker Biggles's Avatar
 
Join Date: Jan 2005
Location: Barnet Herts
Posts: 5,071
Default

Have you got lights or any other electrics?If so do they go dim when you hit the starter?You may have a battery problem or a connection problem.
__________________
On a clear day we stand there and look further than the ordinary eye can see.
Biker Biggles is offline   Reply With Quote
Old 10-01-07, 11:59 AM   #9
wtdafk
Guest
 
Posts: n/a
Default

ive just had a think and relised that it cant be the side stand switch because the bike would usally start in nutral with the stand down im guessing it must be the clutch lever kill switch or the starter button, does this sound right to you?
  Reply With Quote
Old 10-01-07, 12:00 PM   #10
wtdafk
Guest
 
Posts: n/a
Default

my lights are fine and bright no starter noise or anything, hopeful;ly i can fix it before tonite as i got a garage picking it up at 6ish
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help working out a wage rob13 Idle Banter 9 13-11-17 06:47 PM
Key not working wilky007 SV Talk, Tuning & Tweaking 12 29-12-08 01:27 PM
Speedo working, then not, then working??? krhall SV Talk, Tuning & Tweaking 25 24-04-08 11:35 AM
Air horn not working. therealvw Bikes - Talk & Issues 4 24-07-07 07:25 AM
Working on the SV william t. SV Talk, Tuning & Tweaking 12 04-09-06 10:23 PM


All times are GMT. The time now is 01:30 AM.


Powered by vBulletin® - Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.