SV Talk, Tuning & Tweaking Discussion and chat on all topics and technical stuff related to the SV650 and SV1000 Need Help: Try Searching before posting |
![]() |
|
Thread Tools |
![]() |
#1 |
Guest
Posts: n/a
|
![]()
06 plate 650S, fueling seems to be up the wall...starts first time and no probs, gets warm, when knocking down throo gears for junctions, lights etc, when revs drop it just cuts out...bugger to start again! backfiring a fair bit. Noticed a nice split in one of the tank breather pipes (bout 1inch long rite throo both sides), running like a bag o' spanners! going into dealers 2moro as still under warranty...just wondered if anyone else had probs like this? Reckon it either being starved of fuel or air. Let ya's know wot happens with it.
![]() ![]() ![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
![]()
My '05 got the split in one of the breathers after a few thousand miles, doesn't affect anything. Deffo a dealer/warranty job.
|
![]() |
![]() |
#3 |
Member
Join Date: Nov 2005
Location: Hebden Bridge
Posts: 520
|
![]()
Is the idle speed set correctly?
__________________
Formerly Blue K5 with added bits Then Triumph Sprint ST with scottoiler and R&Gs & TOR exhaust Now Benelli Tornado |
![]() |
![]() |
![]() |
#4 |
Moderator
Mega Poster
Join Date: Jan 2004
Location: In the garage where I belong
Posts: 17,083
|
![]()
I reckon that's a crank breather hose you're seeing that's split... But shouldn't really be your problem, they can cause running problems if they're blocked, but holed, no (but still very bad news, since they're open to the crankcases!) I could be wrong, though.
I've nothing constructive to add as to what's causing it though, sorry...
__________________
"We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed" |
![]() |
![]() |
![]() |
#5 | |
Guest
Posts: n/a
|
![]() Quote:
|
|
![]() |
![]() |
#6 |
Moderator
Mega Poster
Join Date: Jan 2004
Location: In the garage where I belong
Posts: 17,083
|
![]()
Fairy nuff. The carbed ones just have one. Wonder if that's some sort of emissions thing? If it is, it could definately give you running issues- a tank only really needs one exit, and a breather in the fuel cap.
__________________
"We are the angry mob, we read the papers every day We like what we like, we hate what we hate But we're oh so easily swayed" |
![]() |
![]() |
![]() |
#7 |
Member
Mega Poster
Join Date: Jul 2003
Location: Hertfordshire
Posts: 1,422
|
![]()
One of the hoses is the water drain hose, the other is something else I have forgotten. It is meant to have a split in it.
|
![]() |
![]() |
![]() |
#8 | |
Guest
Posts: n/a
|
![]() Quote:
I'm going for the "let's see what happens when it warms up" approach ![]() |
|
![]() |
![]() |
#9 | |
Guest
Posts: n/a
|
![]() Quote:
|
|
![]() |
![]() |
#10 |
Guest
Posts: n/a
|
![]()
thanks everyone for the input, put it in this morning, picked it up this evening...fuelling probs were due to the can, it just needed re-mapping!! (asked dealer about 4 months ago if it would need doing...but...oh no!) as for the pipe, bloke did say what it was but it wasn't the breather (can't remember wot now tho! runs along side breather) it deffo should not have a split in it...so been replaced...idle was 1500, now a more suitable 1200-1300 when warm. throttle loverly and smooth now, feels like a different bike...seems to be bit more mid-range as well, maybe it just cos it smoother....nice tho.
Just glad the main dealer is a decent one, no hassles, job done, nicer bike...1 happy guy! thanks everyone! |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
reg rec probs maybe | dizzyblonde | SV Talk, Tuning & Tweaking | 4 | 27-09-07 04:07 PM |
running probs maybe? | Sid Squid | SV Talk, Tuning & Tweaking | 5 | 13-06-07 02:10 PM |
more probs | hovis | Idle Banter | 6 | 02-10-06 09:05 AM |