Pointy Engine parts

[parkinmj]

OK guys I have split an engine for parts.

Everything available is listed below

postage is seperate.

3 x con-rods £10 each

2 x clutch baskets plates and springs £35 each ( one basket, plate set and spring set )
2 x starter motors £25 each
2 x thermostat and valve £10 each
2 x Oil Pressure relief valves £10 each
2 x oil pressure switches £5 each
2 x Gear position sensors £10 each
2 x cam chain adjusters (1 rear 1 front) £30 for both
2 x fly wheels/gennies £25 each (includes windings and ignition timing pick up )
2 x starter motor clutches and gears £20 each (one clutch and one gear)
2 x set of cam chains, gears and guides £25 each (front and rear per set)
2 x gear selector rods (the ones which run through the engine) £5 each
2 x battery to engine earth wires £2.50 each
2 x oil pump drive gears £2.50 each
2 x water pump drive gears (the metal ones on end of crank) £2 each
2 x primary drive gears £5 each
2 x idle reduction gears + shafts £7.50 each (one shaft and gear)

1 x crank £80
1 x gear box £100 (includes selector forks)
2 x selector drum £10
1 x selector fork set £30
1 x rear cylinder+ matched piston £40
1 x front cylinder +matched piston £40
1 x front cylinder head(will not split any further Cams included) £65
1 x rear cylinder head (will not split any further Cams included) £65
1 x 33bhp restricted ECU £75
1 x clutch cover £20
1 x water pump £15
1 x scratched left side cover £5
1 x left side cover (no scratches) £20
1 x piston £5
1 x 16t front steel sprocket (used but lots of life left) £2
1 x rear exhaust manifold/ down pipe £5
1 x first gear pinion £3

Any questions feel free to ask

Everything is ready for immediate dispatch.
And pictures are availible just ask
All the best

MJP

[drag]

Cam chain adjusters right here !!

Wait ... is it a K3 engine your breaking or a K5 ?


If it's a K3 i'll take the Cam tentioners/adjusters if it's a K5 i'd like these parts

25381-19F10
25350-35F00
25355-35F01

http://img.photobucket.com/albums/v22/stingray/SVP/SHIFTSTAR/gear_shifting.gif

[parkinmj]

cam chain adjusters are off a k5.

[Spikenipple]

Do you have a pair of crank cases please?

[parkinmj]

sorry they sold before the week end.

all the best

MJP

[green1]

hi do you still have front&rear cylinder heads for sale

[parkinmj]

Hi mate
sorry you just missed them they went on ebay last night.

All the best

MJP

[parkinmj]

Ok guys im moving soon and dont need any of this but being a student and all that i cant just let it go for free so im opening everything up for offers. or if someone wants it all £100 for the lot.

1 x con-rod
2 x con-rods

2 x clutch baskets plates and springs ( one basket, plate set and spring set )
2 x starter motors
2 x thermostat and valve
2 x Oil Pressure relief valves
2 x oil pressure switches
2 x Gear position sensors
2 x fly wheels/gennies (includes windings and ignition timing pick up )
1 x starter motor clutch and gear
2 x set of cam chains, gears and guides (front and rear per set)
2 x gear selector rods (the ones which run through the engine)
2 x battery to engine earth wires
2 x oil pump drive gears
2 x water pump drive gears (the metal ones on end of crank)
2 x primary drive gears
2 x idle reduction gears + shafts

1 x crank
1 x gear box
2 x selector drum
1 x selector fork set
1 x rear cylinder+ matched piston
1 x front cylinder +matched piston
1 x clutch cover
1 x water pump
1 x scratched left side cover
1 x left side cover (no scratches)
1 x piston
1 x 16t front steel sprocket (used but lots of life left)
1 x rear exhaust manifold/ down pipe
1 x first gear pinion


http://thegallerycuttingcrew.co.uk/EngineParts.html
http://thegallerycuttingcrew.co.uk/EngineParts2.html (http://thegallerycuttingcrew.co.uk/EngineParts2.html)
http://thegallerycuttingcrew.co.uk/EngineParts3.html (http://thegallerycuttingcrew.co.uk/EngineParts3.html)
http://thegallerycuttingcrew.co.uk/EngineParts4.html (http://thegallerycuttingcrew.co.uk/EngineParts4.html)
http://thegallerycuttingcrew.co.uk/EngineParts5.html (http://thegallerycuttingcrew.co.uk/EngineParts5.html)
http://thegallerycuttingcrew.co.uk/EngineParts6.html (http://thegallerycuttingcrew.co.uk/EngineParts6.html)


all the best

Michael
__________________

[parkinmj]

Also got a haynes manual - used- oil and grease stains but still readable with all pages intact and none missing say £5 and free p+p

Aswell as a set of brand new Rear pads for a K5 not sure if they will fit other years but they are EBC's HH pads, new "c" formula Superbike,Streetsport and race formula pads. Still in there original packaging say £12 and free p+p

All the best

MJP

[Seggons]

Out of interest how much would you let the clutch baskets plates and springs go for? :)

[Aidan]

Can I have the Haynes manual (as long as it covers the K3!)?

Will PM for details on how to pay.

[parkinmj]

replied via PM

[parkinmj]

1x clutch set sold
Haynes Manual sold

I will consider resonable offers on everything .

[Seggons]

Thanks alot parkinmj, clutch arrived safely this morning along with the years supply of cling-film. :D

http://img.photobucket.com/albums/v625/Seggons/Stuff/STA72303.jpg

[parkinmj]

glad you got it ok.

its amazing what you can use shrink wrap for :p

all the best

Parkin

[parkinmj]

Ok guys im moving soon and dont need any of this but being a student and all that i cant just let it go for free so im opening everything up for offers. or if someone wants it all £100 for the lot.

plus ive updated whats left.

1 x con-rod k3
2 x con-rods k5

1 x clutch baskets plates and springs ( one basket, plate set and spring set )
2 x starter motors
2 x thermostat and valve
2 x Oil Pressure relief valves
2 x oil pressure switches
2 x Gear position sensors
2 x fly wheels/gennies (includes windings and ignition timing pick up )
1 x starter motor clutch and gear
2 x set of cam chains, gears and guides (front and rear per set)
2 x gear selector rods (the ones which run through the engine)
2 x battery to engine earth wires
2 x oil pump drive gears
2 x water pump drive gears (the metal ones on end of crank)
2 x primary drive gears
2 x idle reduction gears + shafts

1 x crank (£50 minimum)
1 x gear box (£50 minimum)
2 x selector drum
1 x selector fork set
1 x rear cylinder+ matched piston (£20 minimum)
1 x front cylinder +matched piston (£20 minimum)
1 x clutch cover
1 x water pump
1 x scratched left side cover
1 x left side cover (no scratches)
1 x piston
1 x 16t front steel sprocket (used but lots of life left)
1 x rear exhaust manifold/ down pipe
1 x first gear pinion

1x brand new set of double h sintred rear pads for k5 but will probably fit k3 - k9. (£12 delivered)


http://thegallerycuttingcrew.co.uk/EngineParts.html
http://thegallerycuttingcrew.co.uk/EngineParts2.html (http://thegallerycuttingcrew.co.uk/EngineParts2.html)
http://thegallerycuttingcrew.co.uk/EngineParts3.html (http://thegallerycuttingcrew.co.uk/EngineParts3.html)
http://thegallerycuttingcrew.co.uk/EngineParts4.html (http://thegallerycuttingcrew.co.uk/EngineParts4.html)
http://thegallerycuttingcrew.co.uk/EngineParts5.html (http://thegallerycuttingcrew.co.uk/EngineParts5.html)
http://thegallerycuttingcrew.co.uk/EngineParts6.html (http://thegallerycuttingcrew.co.uk/EngineParts6.html)


all the best

Michael

[Sideshow#36]

You have PM :smt041

[parkinmj]

Replied to PM :salut:

[parkinmj]

Ok guys these really need to go. I've had a word with a mate who wrks for a delivery company the price for all these spares plus delivery is £125.
or £100 collected.


All the best

Michael

[parkinmj]

These parts are still available i will be placing them on ebay tonight. if any one would like anything feel free to make a reasonable offer. ( the crank and gearbox have a minimum of £35 each more on the bay)


All the best

Michael

[parkinmj]

All Items Sold

[squirrel_hunter]

Dang, would have taken the cams off of you, only just seen this.

If the deal falls through let me know.