View Full Version : Delivery pipe for Scottoiler
DarrenSV650S
04-02-10, 10:12 PM
I must have had the delivery pipe pressed on to the disc too hard because it has worn right through the side of the pipe :o
Does anyone have a spare one?
Luckypants
04-02-10, 11:34 PM
I must have had the delivery pipe pressed on to the disc too hard because it has worn right through the side of the pipe :o
Does anyone have a spare one?
A few pennies from the Scottoiler website, pack of three.
DarrenSV650S
04-02-10, 11:42 PM
Sweet. Cheers :)
I must have had the delivery pipe pressed on to the disc too hard
You're oiling your brakes?
;)
DarrenSV650S
05-02-10, 02:51 PM
What I meant was, the disc part of the sprocket. As opposed to the teeth. Yeh that's what I meant 8-[
larigos
07-02-10, 08:12 AM
I used a length of brass tube from the local hobby shop. Didn't wear out!
I used a length of brass tube from the local hobby shop. Didn't wear out!
They don't wear out. If it's touching the sprocket it might wear done a bit and it might wear down a bit then it would stop touching. If it's touching more than that you should se it up right.
If it's disappeared then it's got caught in the chain. I would rather have something softer than brass if that happens.
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.