SV650S K8 - Cat D - fully pimped

[Nobbylad]

PRICE REDUCED TO £2,400

OK - so I'm going to regret this.....I've decided I'm going put my beloved SV up for sale so I can get another bike. I wanted to keep it and get another bike, but can't justify 2 - as the missus pointed out, I can't ride both at once :(

I've owned the bike from new and details are as follows (bad bits first):-

Registered total loss Category D in Feb/March 2009 after a low speed accident, where someone turned across me from traffic lights in Manchester city centre - thread here (http://forums.sv650.org/showthread.php?p=1781432#post1781432). The guy at the insurers (who also happened to be a forum member) said I could choose to have him repair it or write it off with the prospect of buying it back...I chose the latter. Damage was fairings, aftermarket exhaust was dented, levers, indicators and gear change pedal.

Bike has done around 6 track days (Oulton, Mallory, Cadwell and Anglesey x 3), dropped once on track (1st trackday), where the damage was mostly scuffed fairings/R&G bungs and levers. Mike (Flymo) saved the day by giving me a spare lever and I rode it home. Thread here (http://forums.sv650.org/showthread.php?p=2042514#post2042514).

It's been blown over by the wind once or twice, damage restricted to the odd broken lense/scuffed bar end.

All in all, no structural damage at all.

43,700 miles on the clock.

FSH upto and including 15k service, after which, I refused to pay big money for oil & filter change - especially after the dealer failed to replace all the plugs, leaving the ones he couldn't be bothered with. Serviced by myself/Yorkie Chris thereafter and also had the odd bit of help from Flymo, replacing the valve stem seals when it started the bad habit of smoking - thread here (http://forums.sv650.org/showthread.php?p=2711044#post2711044).

As she stands now, she's well looked after, gets spoiled rotten, but sadly has to make way for something different.

If there's no interest, I'll probably keep her and try and persuade the Doris to let me keep 2 bikes. I would probably get more breaking it, but can't be bothered with the effort involved.

The good bits:-

Owned from new, so I know the full history.

GSXR750 K7 front end (forks, wheel, calipers, discs, m/c)
Front wheel recently powder coated (May) and new bearings
Tapered roller steering head bearings/races fitted May (Koyo)
Braided front brake lines
K-Tech .85 springs and RSF oil - suit 12-13st rider
New fork seals & fluid (May)
Penske 8987 3-way race shock
New suspension linkage bearing (fitted July)
Racing adjustable rearsets, with banjo pressure switch fitted to operate rear brake light
Fabbri double bubble screen
Pazzo shortie levers
Black pre-load adjusters
CNC transparent clutch cover, spare seal and glass included
Mini-hugger/shock protector (worn at edge)
Powder coated alternator cover
Powder coated pillion pegs
Rear seat cowl
Smoked indicators
Evotech tail tidy
Stubbied Carbon Can Company exhaust
R&G crash bungs
R&G cotton reels/paddock stands
Scottoiler
Bibio's rear wheel adjuster plates
Bibio's vacuum hose extensions
Bibio's external device wiring thingy (not fitted)
SW Motech aluminium rack
Oil stem seals replaced 3k miles ago
New front tyre fitted 2-300 miles ago
Rear tyre done around 3k
C&S fitted around 3k ago, (15T front, 47T rear, Tsubaki 525 Sigma O-ring chain)
Just had oil & filter changed
Stebel Nautilus air horn
Custom oil filler plug (original supplied)
Yoshimura top yoke nut (original supplied)
New Brembo pads & fluid front and rear in May.
Valve clearances all within tolerance
Taxed until June 2014
MOT'd (no advisories) until June 2014

Price reflects the custom parts, as I said, I don't want to break it.

Thanks for looking!

If there's any interest, I'll put some more pics up.

http://i11.photobucket.com/albums/a161/nobbylad/20130513_182951_zps4b5bf430.jpg (http://s11.photobucket.com/user/nobbylad/media/20130513_182951_zps4b5bf430.jpg.html)

[dirtyred619]

I'm in the same boat mate seen another bike I want and been offered a good price for mine off a lad on another forum but can't be hanging about too much so mine will be on here soon otherwise. GLWS.

[Mauler]

Not generally a fan of pointies but that is NICE. Good luck!

[A_Yam]

Mate i will buy this off you if you hold it for a month? I get my ncb on august, its a painful wait.

[Nobbylad]

Mate i will buy this off you if you hold it for a month? I get my ncb on august, its a painful wait.

If you're serious, let's talk. PM me.

[Mark-SV-UK]

Where did younget thencnc clear clutch cover and how much was it

[Nobbylad]

Where did younget thencnc clear clutch cover and how much was it

There's a thread on here

[Mark-SV-UK]

Hello you have the link ???? Love the look of your bike it looks the nuts with black engine

[Nobbylad]

Do a search for cnc clutch cover

[Nobbylad]

By way of an update - I've decided to look at breaking this now, but will only do so if I can generate enough interest in the majority of the bits to make it worth my while. So if only get interest in the ancillaries, then I wont bother. If you are genuinely interested/serious about buying anything, please let me know and I'll update the original post with names against parts in the order I get them. I think the tipping point for me will be once the front end, frame and engine have gone.

Any questions/clarifications in the thread please and any general comments via pm.

Cheers

GSXR K7 750 Front end complete (forks, yokes, black powdercoated wheel, new Dunlop Roadsmart tyre, braided lines, mudguard, TLS clipons, GSXR master cylinder, reservoir, levers, speedo mod + magnets, calipers, Brembo pads, discs, new taper roller bearing fitted (I can supply new races for the frame) £800
Penske 8987 triple clicker shock, serviced (May) and sprung for a 12-13st rider (#525) £500 1) Tom the Great
CNC clutch cover with spare glass & seal £100 - 1) Squirrel Hunter, 2) Tom the Great
Front cowl - Pearl nebular black (YAY) - minor scuffs £75
Headlights £50
Race rearsets with banjo brake s/w £80
Stock rearsets powder coated black £50
4 x Indicators, smoked lenses £50
Evotech tail tidy £30
MTC Exhaust, stubbied £75
Chain & sprockets (525, 15T, 47T) £75
Frame, swingarm, clock £400
Engine 44k miles, oil & filter changed <1k miles ago £400
Rear wheel (black) & Dunlop RoadSmart tyre (few k left) £100
SW motech rack, black aluminium £80 bat-kam
Fabbri black double bubble screen £50
R&G crash bungs (scuffed) and fitting bars. £50
R&G cotton reels (scuffed) £25
Scottoiler £40 1) Poppy Fresco
Bibio's adjuster plates with Scottoiler attachment £15
Bibio's vacuum hose extensions £5
Bibio's external device £10
Pearl nebular black (YAY) fairing lowers £100
Stebel Nautilus air horn £10 - bat-kam
Rear caliper and Brembo pads £25
Stock mirrors, minor scuffs/pitting £20
Front cowl - Pearl nebular black (YAY) - one minor scratch nr. headlight (2cm long) £75
Front subframe (fairing bracket) £50
Rear fairing panels resprayed (YAY) £50
Rear fairing panels, some scuffs £25
Tail T-piece/infill (YAY) £10
Rear brake light £20
Rear fairing centre piece (YAY) £20
Curvy camshafts (for pointy cam swap) £50
EVO Blue Flame can (minor dings) £50
High level link pipe tbd
Front & rear headers (mid-section painted with high temp. black paint) £50
Side stand £10
Pillion pegs (powdercoated black) £20 Whistler
Fuel tank - pearl nebular black (YAY) - light swirl marks, no dings £100
Side infills (pair) £20
Clock surround £30 waygoodr
Rider seat £25
Pillion seat (small tear <1cm) £15
Pazzo levers, clutch SV650, front brake GSXR750 £75
Wiring loom £75
Spare Oil cooler £35
Spare oil cooler pipe (the short straight one) £10
Headlight wiring loom £15
Undertray sprayed pearl nebular black (YAY) £40

[Tom_the_great]

Hi Nobby,

I would 100% have the "Penske 8987 triple clicker shock, serviced (May) and sprung for a 12-13st rider (#525)"

I would be interestd in the the clutch cover depending on what mods would be needed/if any to my K9 pointy.

so provis dibs "CNC clutch cover with spare glass & seal"

Regards,
Tom.

[Popy Fresco]

dibbs on the scootoiler

[M65]

Dont suppose you have the standard clutch cover still and if so, what condition is it in?

[Nobbylad]

Dont suppose you have the standard clutch cover still and if so, what condition is it in?

I have - but would need to put it back on the engine if I sold the CNC one. It's straight with no dings, but the paint has corroded near the water pump outlet.

[whistler]

I would be interested in pillons power coated pegs. Can you just confirm if my understanding is correct that you break your bike only if you have enough ppl interested in all parts?

Thanks

[Nobbylad]

I would be interested in pillons power coated pegs. Can you just confirm if my understanding is correct that you break your bike only if you have enough ppl interested in all parts?

Thanks

Yep. . Basically I need enough cash to put towards another bike which I have lined up, so whilst I don't need everything sold, I'd like the major bits gone. I'll update the other post to reflect your dibs on the pegs.

[650]

Still looking like you're breaking the bike then? Shame, I'd have this off you at the end of August if you could hold out.

[Nobbylad]

Still looking like you're breaking the bike then? Shame, I'd have this off you at the end of August if you could hold out.

If that's a definite them pm me

[haze20]

Would you sell one front fairing bracket? How much delivered?

Thanks

[waygoodr]

Hi could I please have the clock surround £30 and one of the Front subframe (fairing bracket) £50

Regards

[Mark-SV-UK]

Hi fella the black under tray mdoes it come with indicators and number plate light?

Cheers is such a shame your breaking it though

[Nobbylad]

Hi fella the black under tray mdoes it come with indicators and number plate light?

Cheers is such a shame your breaking it though

No. Just the undertray, pretty sure I've sent you pics before.

[waygoodr]

Hi made did you see my message after the clock surround and one of the front fairing brackets if I could please
Regards

[Nobbylad]

Hi made did you see my message after the clock surround and one of the front fairing brackets if I could please
Regards

Yes mate. I'll update the list when I'm at a pc rather than the phone. The person who posted just before you has dibs on the spare bracket but if they don't want it it's yours. Failing that you can have dibs on the one that's on the bike if it does get broken. At the moment there's not enough interest to make it worthwhile.

[haze20]

I was asking on behalf of waygoodr to help out so please go ahead and allow the sale to him

Thanks
James

[Nobbylad]

I was asking on behalf of waygoodr to help out so please go ahead and allow the sale to him

Thanks
James

No probs. Thanks for the PM's clarifying.

Wayhoodr - will pm you.

[waygoodr]

Hi mate just wondering if you got my message if still available I would deffo like the fairing bracket
If you could send me a txt with a pic of it to make sure it's the right one

Regards

Regards

[Nobbylad]

Bump

[Mark-SV-UK]

Hello Mate, have you decided if your gonna strip this lovely bike, in some ways I hope you dont but in other ways others get to have some great bits.

If its the latter can i have second dibbs on the scott oiler

Does it have a K&N air filter?

cheers

[A_Yam]

How much for the front forks?

Or do you want to do some kind of swap for the stocks + cash.

[bat-kam]

You have a PM regarding the screen and rack
Kam

[nikon70]

dibs on the just the right fairing and nose fairing for £150 ?

[rapidgaz]

Have you got a rear hugger matey.

[Nobbylad]

Hi guys - thanks for the interest so far, parts and prices are as per post #10.

I've had some interest in the bike as a whole and am holding out to sell it in one piece as, although I'll get less in the long run, it saves on a whole heap of hassle and effort.

If it hasn't gone by the end of this month then I'll look to start breaking it.

Cheers

[Mark-SV-UK]

Will be such a shame really breaking such a great looking sv

[Nobbylad]

Cant' believe I'm doing this....however...anyone interested at £2,500?

[Mark-SV-UK]

Shame its a lovely bike

[Runako]

Cant' believe I'm doing this....however...anyone interested at £2,500?

That's nuts. If you can't sell yours for more than that with all the stuff you've done to it then that's criminal.

[Nobbylad]

Shame its a lovely car

Is not a bad bike either ;)

[A_Yam]

remove your profile pic of you racing it around a track, maybe that will help.

[Nobbylad]

Why? I've been completely honest in the description, where I state it's been on trackdays and even had a spill. Pointless being anything other than honest with people (IMO).

If it bothers people that it's not in pristine condition and has had the odd scrape, that's fine. If someone does buy it, at least they can take comfort in the fact that they know the history and if someone does buy it, they'll be getting a damn good bargain considering the upgrades alone would come out at near the asking price.

Thanks for your input.

[650]

And not forgetting the fact it's got a Cat D against it, which we all know is nothing...but puts so many people off.

[Mark-SV-UK]

I would still buy it if I didnt have mine already track days dont bother me and as said it does state cat d so I think thats as truthful as you can be really. I love this bike and it will deff be a shame if it does get broken up

[A_Yam]

You selling any fairings?

[Tom_the_great]

see page 1 and 2 for whats for sale what price and whos got dibs if any.

[rapidman17]

Very interested indeed but don't have the cash to cover full asking. I'm guessing no interest in a fully-faired K6 (in great condition) + cash?

[bat-kam]

Hey, did you have the air horn connected via relay? If not then i would like the dibs on it.
Thanks

[Nobbylad]

Hey, did you have the air horn connected via relay? If not then i would like the dibs on it.
Thanks

Horn is connected using relay.

[Nobbylad]

Very interested indeed but don't have the cash to cover full asking. I'm guessing no interest in a fully-faired K6 (in great condition) + cash?

Pm'd

[Nobbylad]

Looks like someone is interested in the engine. If that comes to fruition and people with dibs are still after their parts, then that will be enough for me to start breaking it.

:(

[bat-kam]

Horn is connected using relay.

Ok. I will take the horn, please

Does the sw motech rack come with the givi plate as on your picture?

[Nobbylad]

If you want the Givi plate, that would be another £10, so £90 all in.

[bat-kam]

Let's do it them. £100 for rack, givi plate and horn including postage

[Nobbylad]

Postage would be additional, at cost.

[bat-kam]

Ok.
I know it's not on your list of items for sale but do you have the box to go with the plate? Looking for something for 2 full face helmets

[Nobbylad]

Ok.
I know it's not on your list of items for sale but do you have the box to go with the plate? Looking for something for 2 full face helmets

I have a givi box that takes two full face helmets perfectly.

[bat-kam]

I have a givi box that takes two full face helmets perfectly.

Would you consider selling it with the rack and the plate?

[Mark-SV-UK]

PMSL you know what i meant lol changed and chastised
Is not a bad bike either ;)

[Nobbylad]

Would you consider selling it with the rack and the plate?

Yep. £75 I'll send you a pic

[Nobbylad]

Few more pics. .

http://i11.photobucket.com/albums/a161/nobbylad/20130826_190038_zps59d2ce01.jpg

http://i11.photobucket.com/albums/a161/nobbylad/20130826_190102_zps13e1653a.jpg

[Mark-SV-UK]

Did you paint engine covers on each side black??? Is so what black did you use and how did it last. Great looking bike evwn if I am biast as mine is same lol

[Nobbylad]

Alternator cover was powder coated and the clutch/crankcase cover and water pump were rubbed down, primed and hammerite applied.

They've lasted better than the stock paint lol.

[Ziv]

Nobby,

Sorry, not sure if you've answered this, the top box rack? Could you provide some more details about that? possibly pictures? Having to sell my Givi Rack as it attaches to the pillion footpegs which have since gone AWOL and am therefore thinking of an alternative. Please get back to me

I've a naked k3 pointy :)

[Nobbylad]

It's this one http://www.twistedthrottle.com/sw-motech-alu-rack-toprack-suzuki-sv650-sv1000-03-for-givi-hepco-becker-krauser-topcases

[Mark-SV-UK]

Thats nice I like that :-)

[Nobbylad]

In my opinion, they're the best looking rack, hence me getting one for the bike.

Givi arms are useful, but look carp in comparison (in my opinion), however they are cheaper I think.

[Ziv]

Is yours for a Givi? that be the case you may have a sale here my friend.

My givi box ordinarily fits the Givi Specific Monorack '03/'07 and if you're prepared to sell the adapter hardware pictured then ill b happy to buy that off you for the asking price :)

PM me if thats the case please

------------------------------------
Additionally I agree with you about the rack arms being useful but not great, too much hassle to fit/remove and scratches some paint if its not done properly

[Nobbylad]

Price reduced to £2,250

:(

[Ziv]

Still not prepared to sell the givi rack hardware seperate?

[Nobbylad]

Price reduced to £2,400 which is what I'd previously agreed with Rapidman17 (Zain), only for him to let me down repeatedly, even after we'd agreed the sale and I'd made a gesture of buying new oil, filter and iridium plugs.

So, if you're interested in the bike, let me know. I'd previously reduced it to £2,250 but that was going to be with a Penske 8983 (2-way race shock) fitted, instead of the 8987 (3-way) that is currently on.

I've just sold the 8983, so the bike will come with the 8987 on it and new filter, Motul oil and 4 x brand spanking new NGK Iridium plugs.

I've just bought another bike and need to get rid of this one before I get tempted to race it in Supertwins...which I definitely cannot afford! :D

[650]

Hia

I'm tempted at that price. I'm looking to shift my Triple next week as I just can't bare to see it take any more of a winter battering and succumb to the woes and dangers of riding around the City. So if it doesn't shift by then, I'll be in touch.

[Nobbylad]

OK - I appreciate your interest. I'm still smarting from the last interested party, so I'd just ask you to be up front and honest if you are interested.

Cheers

[davepreston]

swap you for a triumph tiger 955i :)

[Nobbylad]

Stop drinking Dave!


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[davepreston]

im at work, wish I was drinking

[Nobbylad]

Hia

I'm tempted at that price. I'm looking to shift my Triple next week as I just can't bare to see it take any more of a winter battering and succumb to the woes and dangers of riding around the City. So if it doesn't shift by then, I'll be in touch.

I have a guy in work doing his test tomorrow (City based) who's looking for a triple. Do you have any details?

[TheRuffellator]

No idea why this hasn't sold yet! Bargain price for what's included. Glws (sorry for this not being an I want to buy this post!)

[Nobbylad]

Lol...no worries. I guess it's not the right time to sell, plus, as has been noted, the Cat D can put people off I guess.

I was seriously thinking about keeping it and putting a stock front end back on so I could do a season in mini twins. Unfortunately the boss won't let me keep two bikes. :D

[Dalerst]

I'll have the clutch cover off you if you break it looks mint ;)

[Mark-SV-UK]

Pmsl I said same thing months ago about that clutch cover its brillient when you see whats going on inside

[Dalerst]

Pmsl I said same thing months ago about that clutch cover its brillient when you see whats going on inside

LOL I can see project clutch cover coming on for me ;);)

[Mark-SV-UK]

I would love one but looks to much for me to do

Im gob smacked this hasnt been snapped up with all the mods it has its a great bike

[Nobbylad]

Clutch cover is for sale at £2k ;)

[Mark-SV-UK]

Lol bargin then I will have two hehe

[delkeough]

do you have any pictures of the blue flame exhaust?

[Nobbylad]

Sorry mate, no blue flame exhaust.

[delkeough]

Sorry mate, no blue flame exhaust.

Sorry. Whats the blue flame can?

[Nobbylad]

Sorry. Whats the blue flame can?

Not sure what you're on about mate. I have no Blue Flame can/exhaust for sale (and certainly not one in this thread).

Cheers

[delkeough]

Sorry mate, no blue flame exhaust.

By way of an update - I've decided to look at breaking this now, but will only do so if I can generate enough interest in the majority of the bits to make it worth my while. So if only get interest in the ancillaries, then I wont bother. If you are genuinely interested/serious about buying anything, please let me know and I'll update the original post with names against parts in the order I get them. I think the tipping point for me will be once the front end, frame and engine have gone.

Any questions/clarifications in the thread please and any general comments via pm.

Cheers

GSXR K7 750 Front end complete (forks, yokes, black powdercoated wheel, new Dunlop Roadsmart tyre, braided lines, mudguard, TLS clipons, GSXR master cylinder, reservoir, levers, speedo mod + magnets, calipers, Brembo pads, discs, new taper roller bearing fitted (I can supply new races for the frame) £800
Penske 8987 triple clicker shock, serviced (May) and sprung for a 12-13st rider (#525) £500 1) Tom the Great
CNC clutch cover with spare glass & seal £100 - 1) Squirrel Hunter, 2) Tom the Great
Front cowl - Pearl nebular black (YAY) - minor scuffs £75
Headlights £50
Race rearsets with banjo brake s/w £80
Stock rearsets powder coated black £50
4 x Indicators, smoked lenses £50
Evotech tail tidy £30
MTC Exhaust, stubbied £75
Chain & sprockets (525, 15T, 47T) £75
Frame, swingarm, clock £400
Engine 44k miles, oil & filter changed <1k miles ago £400
Rear wheel (black) & Dunlop RoadSmart tyre (few k left) £100
SW motech rack, black aluminium £80 bat-kam
Fabbri black double bubble screen £50
R&G crash bungs (scuffed) and fitting bars. £50
R&G cotton reels (scuffed) £25
Scottoiler £40 1) Poppy Fresco
Bibio's adjuster plates with Scottoiler attachment £15
Bibio's vacuum hose extensions £5
Bibio's external device £10
Pearl nebular black (YAY) fairing lowers £100
Stebel Nautilus air horn £10 - bat-kam
Rear caliper and Brembo pads £25
Stock mirrors, minor scuffs/pitting £20
Front cowl - Pearl nebular black (YAY) - one minor scratch nr. headlight (2cm long) £75
Front subframe (fairing bracket) £50
Rear fairing panels resprayed (YAY) £50
Rear fairing panels, some scuffs £25
Tail T-piece/infill (YAY) £10
Rear brake light £20
Rear fairing centre piece (YAY) £20
Curvy camshafts (for pointy cam swap) £50
EVO Blue Flame can (minor dings) £50
High level link pipe tbd
Front & rear headers (mid-section painted with high temp. black paint) £50
Side stand £10
Pillion pegs (powdercoated black) £20 Whistler
Fuel tank - pearl nebular black (YAY) - light swirl marks, no dings £100
Side infills (pair) £20
Clock surround £30 waygoodr
Rider seat £25
Pillion seat (small tear <1cm) £15
Pazzo levers, clutch SV650, front brake GSXR750 £75
Wiring loom £75
Spare Oil cooler £35
Spare oil cooler pipe (the short straight one) £10
Headlight wiring loom £15
Undertray sprayed pearl nebular black (YAY) £40

Iv highlighted in red from the post on the 1st page.

[Nobbylad]

Whooops! Sorry fella, I've read that list so many times, I can't see the wood for the trees.

Unfortunately I sold the Blue Flame a while ago (think there was a separate thread on here).

However the CCC exhaust is available....it's a special offer at the moment where you buy the can and get a fully sorted bike for free! (Can is £2,400) ;)

[delkeough]

Hah if only. Always my luck missing out lol

[Kenzie]

Would be interested in Bibios gizmo thing. Is that price with postage?

[Nobbylad]

Bump

[nikon70]

Rear sets please

[Nobbylad]

Brand new rear tyre (Dunlop RoadSmart II) fitted.

[Nobbylad]

46k miles on the clock.

New filter, Motul oil and 4 x new Iridium NGK plugs waiting to be fitted.

[Nobbylad]

Still £2,400

[nikon70]

Can't believe this has not sold yet...

[Nobbylad]

Me neither, winter wasn't the best time to advertise it I guess. Gonna start marketing it more soon.

[Nobbylad]

Oil & filter change done.