scottoiler on 1999 sv650

[jon-northampton]

Hi
What is the best locations for the scottoiler on a 1999 sv650, and the easiest way to fit it ,(my diy skills are minimal) thanks , would appreciate pictures if you have any.

[carelesschucca]

I fitted the Scottoiler under the tail unit on the outside of the frame, it sat behind the plastics of the seat cowl, so perfectly hidden. The pipes were cable-tied down the inside of the subframe went round the end of the swing arm and back underneath to sprocket. Sadly I don't have pictures as I no longer have the bike.

[Davemurphy007]

I got my garage to fit mine while it was in for some other work. They fitted the reservoir in the tail unit under the pillion seat and ran the pipes down the swingarm. No pictures as I'm out of the country at the mo.

[mep]

Mine is attached to the sub frame on the left hand side under the pillion seat. The pipes run down the sub frame to the swingarm and back underneath it to the sprocket.

I used the Scottoiler reservoir mounting sleeve with holes which is cable tied to the sub frame. The pipe is cable tied too, although i have a couple of the self adhesive clear pipe holders under the swing arm but they need to be cable tied. I recommend the steel dispenser adapter.

No pictures as i would need to take off some plastic but i hope you get the idea.

[Luckypants]

There is a tailor made spot on a curvy to mount the Scottoiler reservoir. On the left hand side, remove the little black triangle trim panel under the seat, feel on the back of the frame and you will find a 10mm threaded hole. Bolt the scottoiler to this. Below is a post from waaaay back showing this.

http://www.pyroserve.com/tsm/TSM_scottoiler_fitment_1.jpg

http://www.pyroserve.com/tsm/TSM_gillesLHS1.jpg

Yes the colour is odd, it not that anymore.

HTH

[jon-northampton]

Thanks for your replies and the pictures