View Full Version : Clutch thingy for a curvy, 1999...
triumph5ta
09-02-06, 01:13 PM
or "screw assembly, clutch release" according to the parts fiche.
Its the gadget that turns the "pull" of the clutch cable into "push" on the clutch rod. I took mine off to clean it and a load of little ball bearings fell out... I put as many as I could back in and it does still work but is a bit "grabby". Brand new is £31 from Suzuki.... if anyone has a good one out there?.....
Adam.
dirtydog
09-02-06, 10:34 PM
I think i may well have one laying around. I'll check over the weekend.
triumph5ta
10-02-06, 12:53 PM
Nice one, most grateful,
Adam.
Well Oiled
10-02-06, 09:35 PM
or "screw assembly, clutch release" according to the parts fiche.
Its the gadget that turns the "pull" of the clutch cable into "push" on the clutch rod. I took mine off to clean it and a load of little ball bearings fell out... I put as many as I could back in and it does still work but is a bit "grabby". Brand new is £31 from Suzuki.... if anyone has a good one out there?.....
Adam.
Can't you just get some ball bearings? easy enough to take it apart, grease it up and reassemble with new ones.
petevtwin650
10-02-06, 10:42 PM
[
Can't you just get some ball bearings? easy enough to take it apart, grease it up and reassemble with new ones.
Easy enough if you have the fingers of a 5 year old maybe. :cry:
Luckily my partner has. :D
Should be a warning on the flipping outer casing.
triumph5ta
13-02-06, 09:55 AM
Can't you just get some ball bearings? easy enough to take it apart, grease it up and reassemble with new ones.
Im not sure how they fit back in and I dont think they are supposed to fall out when you remove the release, therefore I think its worn out. Im not sure of size of the ball bearings and how many there should be , I think some were missing before I took it off... if DirtyDog doesnt have a spare I will have to get a new one.
Adam.
Mike1234
13-02-06, 11:19 AM
If they are the same as the fuel injected bike (can't see why not) I have a couple kicking around somewhere.
dirtydog
13-02-06, 05:44 PM
Right i found it, unfortunately it had all come apart and the bearings have gone AWOL :shock:
sorry
over to you mike :wink:
triumph5ta
14-02-06, 01:12 PM
If they are the same as the fuel injected bike (can't see why not) I have a couple kicking around somewhere.
Hi Mike, if you have a complete one can I buy it from you?
Adam
triumph5ta
16-02-06, 09:47 AM
Got one from the excellent Mike, many thanks for all who offered help.
Adam.
vBulletin® , Copyright ©2000-2025, Jelsoft Enterprises Ltd.