SV650.org - SV650 & Gladius 650 Forum - SV650s Fairing fitting Kit

Page 2 of 2

Show 40 post(s) from this thread on one page

SV650.org - SV650 & Gladius 650 Forum (http://forums.sv650.org/index.php)

- Stuff Wanted (http://forums.sv650.org/forumdisplay.php?f=114)

- - SV650s Fairing fitting Kit (http://forums.sv650.org/showthread.php?t=169888)

disco

13-09-11 09:10 PM

Re: SV650s Fairing fitting Kit

@phil they sell the four (or five) plastic clips that join the lower fairing together on ebay

@imnosuperman nobbylad is right the problem with the cheap crash bungs is that if you have an off the bike weight will easily break the standard fairing clips that are replaced when you buy r&g crash bungs with fittings that are a million times stronger

phil24_7

14-09-11 11:14 AM

Re: SV650s Fairing fitting Kit

The clips, yes. The plastic bracket, no. Wouldn't want to make a metal one of these due to flex etc but I'm sure something could be fashioned with a dremel, drill and some suitable plastic!

disco

15-09-11 07:20 AM

Re: SV650s Fairing fitting Kit

the plastic bracket was attached (plastic welded) to one half of my fairing

All times are GMT. The time now is 06:05 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page